On Demand Video Courses - Professsional Development for Enginneers and Technologists

IDC Technologies

Providing training for over 500,000 Engineers and Technicians since 1991

AGLBHPBPChevronRio TintoShellTataToyota

  • Electronics
  • DEI11M10-SP Analysis of Power Quality Indicators, Batteries and Semiconductor Devices

DEI11M10-SP Analysis of Power Quality Indicators, Batteries and Semiconductor Devices

  • Duration:
  • Investment: US$ 199
Certificate:

Must complete all lessons

Content

Viewed

Description

Poor power quality leads to improper functioning of the system and in some cases it may cause hazardous problems. The steadfastness of the system depends on the amount of electricity it receives to perform its action. In order to safeguard the system from power anomalies, it is necessary to detect these problems with appropriate instruments.
This course, gives students a wide idea on power quality indicators, improvement methods and selection of UPS, batteries and semiconductor devices.
After completion of this course, students will know about the need of power quality improvement and need of uninterrupted power supply.

WHO SHOULD COMPLETE THIS COURSE?                       

  • Electronics engineers
  • Power system analysts
  • Instrumentation engineers/ technicians
  • Electricians/Operators
  • Electrical engineers
  • Maintenance Engineers/technicians
  • Protection and control engineers
  • University Power System educators
  • Safety Facilitators

COURSE OUTLINE
POWER QUALITY & INDICATORS

  • Note carefully
  • Power quality – definition
  • Important aspects
  • Power quality attributers
  • Why are limits specified?
  • Typical power quality problems
  • Power quality indicators
  • Sag, swell,  surges and interruption
  • Frequency disturbance
  • Importance of maintaining frequency
  • Mitigation frequency disturbances
  • Waveform asymmetry 

POWER QUALITY IMPROVEMENT

  • Need for power quality improvement
  • Continuity-Equipment needs
  • Understand failures
  • Effect of interruptions
  • Production behavior after power failure
  • Safety hazards – Examples
  • Equipment damage – Examples
  • Hazards conditions
  • Direct & indirect costs of interruption
  • Minimizing failures
  • Minimize duration of interruption
  • Consider non-electrical solutions
  • Redundancy approach

UPS TYPES & VOLTAGE VARIATIONS

  • UPS – types
  • Static UPS systems
  • General configuration –Static UPS
  • System components
  • Static & passive UPS
  • Line interactive UPS
  • Double conversion UPS
  • Rotary & hybrid UPS system
  • Voltage variation, sage reasons
  • Factors determine sag vales
  • Voltage sag during a fault
  • Effects of sag & swell
  • Equipment sensitivity
  • CBEMA sensitivity curve
  • Handling voltage variations
  • Control improvements – Examples
  • Voltage regulators
  • Improvement by system change
  • Summary

TYPES OF BATTERY & CHARGING

  • Need for uninterrupted power supply
  • What is a battery?
  • Typical cell
  • Primary & secondary battery
  • General operation cycle
  • Types of battery construction
  • General features – lead acid cells & Ni Cd cells
  • Need for charging
  • Types of charging
  • Trickle, float and boost charging
  • Battery discharge characteristics
  • Charging equipment
  • Configuration
  • UPS battery charging

SEMICONDUCTORS AS RECTIFIERS & INVERTERS

  • Common solid state devices
  • Diode, N-P-N Transistor, Thyristor(SCR), GTO Thyristor, IGBT
  • Rectifiers – basics
  • Rectifier single & three phase configurations
  • Inverters – Principle of operation
  • Synthesized AC waveform – PWM
  • Why PWM

BATTERY SELECTION, SIZING & INSTALLATION

  • Battery selection
  • Sizing of batteries
  • DC system battery sizing
  • Sizing process for DC systems
  • Calculating number of cells
  • Computing duty cycle & load
  • A typical load cycle

IEEE method & alternative method

  • Correction factor for sizing
  • UPS battery sizing
  • Batter kW calculation
  • Handling the cells
  • Safety during installation
  • Failure by sulphation
  • Excessive discharging – Hydration
  • Mechanical failures
  • Is battery room classified as hazardous location?
  • Disposal of cells

SURGES – CAUSES, MITIGATION & PROTECTION

  • Surges, causes and mitigation
  • Surge coupling
  • Surge mitigation approach
  • Lightning – the external sources
  • Lightning multiple waves
  • Resistive & inductive capacitive coupling
  • Types of grounding systems
  • Isolated grounding systems
  • Multiple grounding points – bonding
  • Surges and surge protection
  • Basic principle of surge protection
  • Surge Protection Devices (SPD)

SURGE – SUPPRESSORS & PROTECTION

  • Type of surge suppressors
  • Voltage limiting & switching type
  • Metal Oxide Varistors (MOV)
  • Gas arrestors
  • Spark gaps & gas discharge tubes
  • Surge protection of electronic equipment
  • Lightning surge in sensitive equipment
  • Surge protection zones
  • Zoned protection approach
  • Selection criteria of SPD
  • Positioning of a lightning arrestors
  • Supplementary surge protection
  • Practical view of surge protection
  • SPD’s for special applications
  • Protection of C&I equipment
  • Crucial factors
  • Protection of transmitters
  • Loop protection
  • Protection at field end
  • Comprehensive protection
  • Motor temperature sensors
  • Data communication devices
  • Hazardous areas – special features
  • Grounding of IS circuits

HARMONICS

  • What are harmonics?
  • Linear loads
  • Non-linear load(Saturation)
  • Non-linear load(Electronics switches)
  • SMPS waveform
  • Non-linear load (Arc furnace)
  • Non-linear load (Arc welders)
  • Harmonic characteristics
  • Effect  of third harmonic component 
  • Detecting & analyzing the cause
  • Harmonic components – SMPS
  • Non-linear loads are harmonic sources

HARMONICS – PROBLEMS

  • Problems – neutral overload
  • Overloading due to 3rd harmonics
  • Solutions for neutral overloading 
  • Overheating of transformers
  • False tripping of circuit breakers
  • Capacitor failures due to harmonics
  • Harmonic currents
  • Skin effect
  • Electromagnetic interference
  • Voltage distortion due to harmonic current
  • Reduce distortion by segregation
  • Harmonic effects on rotating machine
  • Interference with zero crossing 
  • Limits of harmonics
  • Harmonic components

HARMONIC CONTROL METHODS

  • Harmonic control methods
  • Rectifier configuration
  • Single phase rectifier
  • Passive filters for harmonic control
  • Shunt filter
  • Isolation by transformer delta winding
  • Active filters
  • Harmonic content before & after filtering
  • Active filter advantages
  • Linear and non-linear loads & harmonics

NOISE IN ELECTRICAL CIRCUITS

  • Noise fundamentals
  • Typical sources of noise
  • Principles of dealing with noise
  • How does noise affect circuits
  • Common & transverse mode noise
  • Noise coupling
  • Galvanic coupling
  • Capacitive or electrostatic coupling
  • Capacitive coupling
  • Shield minimizes capacitive coupling
  • Electromagnetic coupling
  • Twisted pair principle
  • Separation in cabling avoids induction
  • Electromagnetic shield 
  • Opto-coupling for noise mitigation
  • Transformer coupling
  • Measures to avoid noise coupling 

POWER FACTOR ANALYSIS

  • Power flow
  • Power triangle
  • Power factor correction
  • Effect of reactive loads
  • Shunt capacitance
  • Effect of shunt capacitance on current phase & voltage phase
  • Voltage regulation using shunt capacitors
  • Use & Effects  of series capacitors
  • Series compensation (SC)
  • Shunt reactors
  • Synchronous compensators
  • Dynamic compensation
  • Static VAR compensators
  • Effect of capacitors on induction motor torque

POWER QUALITY ISSUES AND STUDIES

  • Power quality problems
  • Common power quality problems
  • What is a separately derived source?
  • Power quality related problems -1
  • Power supply system’s TN-C vs. TN-S
  • FPSO power distribution – cyclone, vessel A
  • Power quality related problems -2, 3 & 4
  • Solutions normally adopted
  • Common solutions
  • Defining the problem
  • Site coordination agencies
  • Conducting the study
  • Building service entrance
  • Distribution system checking
  • Branch circuits for sensitive loads
  • Separately derived systems
  • Connection integrity
  • Isolated ground systems
  • Neutral & ground conductors 
  • Surge protection checklist
  • Specialized instruments

Investment

Plan Name Investment
Unlimited Access for 2 Years: US$ 199

Instructor

Frikkie Marx

Pr Eng, B Sc (Eng) Senior Engineer

Frikkie has over 20 years of experience in the fields of Power Systems from design to industrialisation. He started his career on the Power System Protection side, then migrated to EMC and Power Supply Systems. Frikkie's portfolio of achievements includes the design of Power Systems, Switch Mode Power Supplies, UPS, high precision Servo Amplifiers, battery and Inverter Design for solar panel applications, vehicle management, specialised computer systems and high current starter for vehicle plants. Lecturer and course developer of Industrial  and Power electronics for Technikon SA (UNISA). Project Manager/System engineer for the development of Electro-optical systems which include video systems for UAV’s and a high resolution Infra-Red Camera. Other activities include the mentorship programs of Kentron, Industrial electronics, rockets and robots training programme for the Denel Youth Foundation Bridging Program as well as training consultant.

Viewed
Duration

Student Login

Log in  \/ 
x
Register  \/ 
x

Why Undertake a Video Course?

Completely Online

All videos and eBooks can be viewed entirely online

Complimentary eBooks

Receive an eBook (or two) for each course you purchase

2 Year Unlimited Access

Have access to the course at any time of the day, for a period of 2 years

Repeat Viewing

All videos and eBooks can be viewed multiple times throughout the 2 year period

Downloadable Certificate

Unlock a certificate as proof of course completion

Free Courses

SAK-SP Swiss Army Knife of Videos on Engineering Skills
  • 11096 Students

It is our silver anniversary in the training and education industry and we are celebrating it with you! Receive your exclusive and complimentary access to the IDC Technologies’ “Swiss Army Knife...

DMC8-SP Mechatronics and Remote Engineering - Digital Circuit Design
  • 1177 Students

Was $99 - now no charge to register for this course.  Register here *On registration return to the main course page, click on the "Green Enroll" button. Digital circuits are the basic...

eBook Downloads

All of our included eBbooks require the free CopySafe Reader

Copy Safe Reader CopySafe Reader from Artistcope

IDC- Online Accepts Paypal

Australian residents who purchase a course/s are charged 10% GST.

This is in addition to the course price and is included in the Paypal Invoice.

Who is online

We have 146 guests and 12 students online

Go to top