On Demand Video Courses - Professsional Development for Enginneers and Technologists

IDC Technologies

Providing training for over 500,000 Engineers and Technicians since 1991

AGLBHPBPChevronRio TintoShellTataToyota

  • Mechanical
  • PT-SP Fundamentals of Process Plant Layout and Piping Design

PT-SP Fundamentals of Process Plant Layout and Piping Design

  • Duration:
  • Investment: US$ 299
Certificate:

Must complete all lessons

Content

Viewed

Description

This online course will cover the fundamental principles and concepts used in process plant layout and piping design. Upon completion of this live online course, attendees will have a clear understanding of the design and engineering principles used in plant layout and piping design. The outcome will be a work force with the required skills and faster learning curves with minimal on the job training. This will increase productivity and shorten engineering and construction schedules. The process plants will get on stream quicker and operate with increased safety and reliability, satisfying the needs of the client.

 

YOU WILL LEARN

  • Fundamental principles of chemical process technology
  • Terminology and symbols used in plant layout
  • Piping design and engineering principles
  • Plant layout fundamentals, procedures and 3D modelling

 

WHO SHOULD COMPLETE THIS COURSE?

  • Consulting engineers
  • Chemical (process) engineers
  • Designers and engineers involved in instrumentation and control of process plants
  • Electrical designers and engineers
  • Equipment designers and engineers
  • Mechanical engineers
  • Personnel from EPC (Engineering, Procurement and Construction) companies
  • Personnel providing CAD support for plant layout and piping design
  • Piping designers and piping engineers
  • Plant maintenance personnel

 

PRE-REQUISITES

No previous knowledge, experience or qualifications are required to undertake this course, though an intermediate understanding of process plants is recommended.

  • Project engineers
  • Structural designers and engineers

 

COURSE OUTLINE

PLANT LAYOUT AND PLOT PLANS

  • Plant layout specifications
  • Codes
  • Safety considerations
  • Plot plans
  • Equipment arrangement drawings

 

INTRODUCTION TO PROCESS PLANT LAYOUT AND PIPING DESIGN

  • Plant layout fundamentals
  • Procedures and workflow
  • Physical quantities, units and trigonometry

 

FUNDAMENTALS OF PIPE

  • Pipe dimensions
  • Pipe data
  • Pipe joining methods
  • Pipe representation
  • Common abbreviations

 

INTRODUCTION TO CHEMICAL PROCESSING METHODS

  • Unit operations and unit processes
  • Process Flow Diagrams (PFDs)
  • Utilities

 

PIPING SYSTEM COMPONENTS

  • Fittings – elbows, tees, reducers, end caps
  • Fitting makeup and dimensions
  • Flanges
  • Valves
  • Pipe racks
  • Pipe supports
  • Anchors and guides
  • Piping isometrics
  • Piping plans, sections, elevations
  • 3D representation

 

EQUIPMENT USED IN PROCESS PLANTS

  • Process equipment – reactors, towers, exchangers, vessels
  • Mechanical equipment – pumps, compressors, turbines
  • Equipment drawings, nozzle specifications, vendor drawings

 

PROCESS AND INSTRUMENTATION DIAGRAMS (PIDS)

  • Equipment foundations and supports
  • Instruments and instrument symbols
  • Control valve manifolds
  • Metre runs

 

PLANT LAYOUT AND PIPING DESIGN DOCUMENTATION AND TOOLS

  • Line lists
  • Equipment lists
  • Bill of materials
  • P&IDs
  • Piping isometrics
  • 3D models
  • Piping specifications
  • Piping codes

Investment

Plan Name Investment
Unlimited Access for 2 Years: US$ 299

Instructor

Behrouz Ghorbanian

BSc, MSc, MIEAust

Behrouz has completed degree courses in Telecommunications and Electrical Engineering overseas. He also completed his studies in Electrical Utility Engineering at Curtin University in 2004. Behrouz started his career in the oil and gas industry where his role got him involved in the maintenance and repair of electronic and navigational marine equipment (VHF and SSB radios, Sat Nav, engine control panels etc). He then moved to the power industry and was involved in the design, installation, and commissioning of substations mainly for consultancies and utilities. He has also established a good reputation in teaching power system protection over his long term services lecturing at Curtin University, and also over the period he worked as a Protection Engineer in New Zealand.

Over the past years, Behrouz has been involved in many major projects across Australia (Port Hedland, Barrow Island, Tamar Valley, Karratha, and Newman for example). His most recent experience is related to cost estimation and risk assessment of major substation projects with a special focus on the secondary systems (Protection, COMMS, SCADA). He has also worked as an Engineering Manager and Senior Project Engineer on major copper mine projects overseas. Behrouz has also gained good knowledge in substation design, HV cables sizing and installation, transmission system design, earthing system design and applications, and power system protection design and applications.

Courses by this presenter

Name Level Release Date
EN-SP Electrical Power Systems for Non Engineers 31-08-2015
EK-SP Inspection, Testing and Commissioning 08-09-2015
AF-SP Arc Flash Protection for Electrical Safety Professionals 26-08-2015
TF-SP Practical Power Transformers 23-09-2015
AC-SP Practical Fundamentals HVAC 07-10-2015
PT-SP Fundamentals of Process Plant Layout and Piping Design 28-10-2015
PD-SP Practical Power Distribution 18-11-2015
ER-SP Practical Earthing (Grounding), Bonding, Lightning and Surge Protection 19-11-2015
MK-SP Best Practice Electrical Engineering in Mining, Building Industry and Utilities 15-01-2016
MKa-SP Understanding Basic Costings for Apprentices and Technicians 15-01-2016
PS-SP Practical Power System Protection 25-01-2016
EY-SP Fundamentals of Electrical Substation and Switchyard Design 28-01-2016
MEY1-SP Role and configurations of substations, system studies, switchyard technical specifications 10-02-2016
MEY2-SP Fault limiting, PFC, harmonic control, protection design 10-02-2016
MEY3-SP Earthing systems, switchyard lightning protection, control and interlocking 10-02-2016
MEY4-SP Switchyard facility planning, GIS SWGR 11-02-2016
MEY-SP Advanced Electrical Substation and Switchyard Design 11-02-2016
MEY5-SP Overview of MV metal enclosed SWGR, MV substation design & specifications 11-02-2016
DIA4-SP Advanced Industrial Automation - Plant Layout and Piping Design 14-02-2016
DIA-SP Specialized Engineering (Industrial Automation) 25-02-2016
BCIIP-SP Relay Theory and Basic System Protection 16-03-2016
SAK-SP Swiss Army Knife of Videos on Engineering Skills 08-06-2016
EN4-SP Electrical Power Systems - Transformers 01-07-2016
EN5-SP Electrical Power Systems - Earthing Systems 01-07-2016
EN6-SP Electrical Power Systems - Power Protection 01-07-2016
PS6-SP Practical Power System Protection - Feeder Protection 01-07-2016
PS8-SP Practical Power System Protection - Instrument Transformers 01-07-2016
PS18-SP Practical Power System Protection - Generator Protection 01-07-2016
PD2-SP Practical Power Distribution - Overview of Power Distribution 18-11-2015
EN3-SP Electrical Power Systems - Measurements and Applications 01-07-2016
EN12-SP Electrical Power Systems - Power Quality 01-07-2016

Requirements

General Requirements:

No previous knowledge, experience or qualifications are required to undertake this course, though an intermediate understanding of process plants is recommended.
Viewed
Duration

Student Login

Log in  \/ 
x
Register  \/ 
x

Why Undertake a Video Course?

Completely Online

All videos and eBooks can be viewed entirely online

Complimentary eBooks

Receive an eBook (or two) for each course you purchase

2 Year Unlimited Access

Have access to the course at any time of the day, for a period of 2 years

Repeat Viewing

All videos and eBooks can be viewed multiple times throughout the 2 year period

Downloadable Certificate

Unlock a certificate as proof of course completion

Free Courses

SAK-SP Swiss Army Knife of Videos on Engineering Skills
  • 11219 Students

It is our silver anniversary in the training and education industry and we are celebrating it with you! Receive your exclusive and complimentary access to the IDC Technologies’ “Swiss Army Knife...

DMC8-SP Mechatronics and Remote Engineering - Digital Circuit Design
  • 1203 Students

Was $99 - now no charge to register for this course.  Register here *On registration return to the main course page, click on the "Green Enrol" button. Digital circuits are the basic...

eBook Downloads

All of our included eBbooks require the free CopySafe Reader

Copy Safe Reader CopySafe Reader from Artistcope

IDC- Online Accepts Paypal

Australian residents who purchase a course/s are charged 10% GST.

This is in addition to the course price and is included in the Paypal Invoice.

Who is online

We have 408 guests and 8 students online

Go to top