- Heat Transfer (925 KB) In this paper, all the heat transfer rate equations applied in the three modes of heat transfer such as conduction, convection and radiation are presented.
- Computational Fluid Dynamics (CFD) (72 KB) This paper deals with the brief overview of Computational Fluid Dynamics (CFD).
- Crankshaft Torsional Absorbers - Often mistakenly called "crankshaft harmonic dampers" (159 KB) The concepts of crankshaft torsional absorbers and its importance is studied in this paper.
- Exhaust System Technology - The Sound and The Fury (658 KB) The computation of what actually goes on during an exhaust cycle in compressible fluid flow are explained in detail.
- Finite Element Analysis (48 KB) The concepts, the basic element shapes and the types of analysis of the finite element analysis technique is dicussed in this paper.
- IC Engines (87 KB) The ideas behind the SI Engine and the CI Engine is explained in this paper.
- Power and Torque (269 KB) This paper presents the essential concepts of Power and Torque.
- Propeller Performance Factors - Basic Information to Help Select the Correct Propeller (121 KB) This paper presents a few basic information regarding propeller performance with respect to the efficiency, tip speed, and performance maps.
- Torsional Output of Piston Engines - The torsional pounding that piston engines apply to the stuff they run (201 KB) This paper presents an explanation of piston engine torsional excitations.
- What is Fluid Mechanics? (157 KB) This paper presents an overall view on the fluid mechanics.
- A rational approach to CAD standardization (594.69 KB) it demonstrates the risks that arise when a manufacturing project relies on multiple CAD systems for modeling
- Basic Hydraulic Systems (1639.58 KB)
- Boiler Control Systems (431.39 KB)
- Boiler Optimisation (113.38 KB)
- Boiler Plant Operation (276.61 KB)
- Chemistry of Photography (54.71 KB) Collect objects suitable as "subjects" for your photography experiments. The subjects must lie flat on a 3 x 5 -light-sensitive piece of paper or cloth for several minutes.
- Classroom HVAC Improvements (351.66 KB).
- Computer Shock and Vibration Concerns (106.3 KB)
- Condensing Boilers for Commercial Asessment (2.7 MB)
- control of wet etching for silicon wafer thinning (329.2 KB) Thin wafers have become a basic need for a wide variety of new microelectronic products. Thinner die are being required to fit into thinner packages.
- Controlled Passive Ship Stabiliser System (91.94 KB)
- Corrosion Under Insulation: Is there a Cure? (447.28 KB)
- Customizing the AutoCAD 2006 User Interface (149.21 KB) AutoCAD menu customization has always been somewhat of a mystery to some users. It involved many different files, and you needed to learn a specialized syntax
- Damping Cross-Reference (32.7 KB)
- Delivering a Sustainable Railway (439.47 KB).
- Designing and Operating HVAC in Hospitals (206.67 KB).
- EFFECT OF FEED RATE ON THE GENERATION OF SURFACE ROUGHNESS IN TURNING (803.37 KB) In this paper the effects of the feed rate on the generation of surface roughness in turning is analyzed. The studies include roughness profiles, their roughness indices and Fourier spectra.
- EFFECT OF FUEL ADULTERATION ON ENGINE CRANKCASE DILUTION (220.89 KB) Excessive crankcase dilution of lubricating oil in petrol driven vehicles across Dhaka city have been reported recently.
- Effect of β/α Strength Ratio on the Stress-Strain Curve of Beta Titanium Alloy by Finite Element Modelling (1785.78 KB) A systematic study was undertaken to determine the effect of the β/α strength ratio on the stress-strain behavior of near beta titanium alloy by the finite element method.
- Effect of Inclination Angle on Performance Limit of a Closed-End Oscillating Heat Pipe (568.61 KB) This study presents the effect of inclination angle on the performance limit of a Closed-End Oscillating Heat Pipe (CEOHP).
- Effect of Included Angle in V-Groove Butt Joints on Shrinkages in Submerged Arc Welding Process (204.94 KB) This paper deals with the experimental analysis of transverse and longitudinal shrinkage in single and double V-groove butt joints in submerged arc welding by varying included angle and keeping process parameters constant.
- Effect of Inner Diameter and Inclination Angles on Operation Limit of Closed-Loop Oscillating Heat-Pipes with Check Valves (180.71 KB) This research paper studies the effect of inner diameter and inclination angles on operation limit of a closed loop oscillating heat pipes with check valves (CLOHP/CV).
- EFFECT OF INTERPHASE CHARACTERISTIC AND PROPERTY ON AXIAL MODULUS OF CARBON NANOTUBE BASED COMPOSITES (368.28 KB) In carbon nanotube (CNT) based composite, due to the small (micrometer) size of reinforcements a large amount of interphases is developed during the time of production
- EFFECT OF MIG WELDING INPUT PROCESS PARAMETERS ON WELD BEAD GEOMETRY (540.38 KB) The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied.
- EFFECT OF PERCENTAGE OF CARBON ON THE TENSILE (155.95 KB) The basic necessity of performing these process is that to improve the tensile strength, hardness, dimensional stability & wear resistance by passing the material through cooled area.
- EFFECT OF SPOT WELD POSITION ON QUALITY OF AUTOMOBILE SHEET METAL PARTS (369.01 KB) In this paper, the influence of variation in position of spot welds is investigated with respect to geometrical quality, by simulating and analyzing the geometrical variation of an A-pillar assembly.
- Effect of Various Nozzle Profiles on Performance of a Two Phase Flow Jet Pump (554.98 KB) This paper reports on the results of experimental investigations on the performance of a jet pump operated under selected primary flows to optimize the related parameters.
- Effect of various parameters on the performance of capillary tube (632.4 KB) In this paper analysis the performance of capillary tube under the different condition.
- Effects of HVAC on Airborne Fungal Populations (5.56 MB)
- Effects of Rapid Preheating and Solution Heat Treatment on Mechanical Properties of AA2618 (355.82 KB) The microstructural and mechanical characteristics of rapid radiation heating and convection gas-fired heating on AA2618 forged samples have been studied.
- Elastic-Plastic Contact Analysis of Single Layer Solid Rough Surface Model using FEM (549.47 KB) In this work, a three dimensional layered solid rough surface in contact with a rigid flat is modeled and analyzed using finite element method.
- Elasto-Visco-Plastic-Damage Model for Pre-Strained 304L Stainless Steel subjected to Low Temperature (521.38 KB) In this study, pre-strain level and pre-strain temperature dependent tensile tests are carried to investigate mechanical behaviors.
- Electrochemical and Spectroscopic Studies of 5,10,15,20-Tetrakis(4-hydroxyphenyl)-21H,23H-porphine (322.36 KB) The synthesis, spectroscopic and electrochemical characterization of 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphine (THPP) is presented
- ELEPHANT GRASS-GLASS FIBER HYBRID COMPOSITES (53.79 KB) An attempt has been made in the present work to explore and the possible use of variety of cultivated/wild grown fiber in the development of elephant grass–glass fiber reinforced polyester hybrid composites.
- Energy Economics Study on Biomass Energy Conversion Techniques (470.63 KB) This Paper deals with the various types of modern energy generation techniques and cost analysis as well as economics from Biomass.
- Engine Operated Screwjack (479.25 KB) An automatic engine operated screw jack is designed which outweighs the pneumatic and electrical automatic system in various aspects like reliability, maintenance, cost etc.
- Equilibrium, Kinetics ,Thermodynamics of Zn (II) Sorption on Particle Size of Natural Hydroxyapatite (393.92 KB) In this study, the sorption of Zinc ions from a Zn solution onto HAP particles with sizes of 1537.6 nm and 47.6 nm at three initial pH values of 4.50, 6.00 and 7.50 was studied.
- Erosion Wear Behaviour of Bamboo/Glass Fiber Reinforced Epoxy Based Hybrid Composites (327.38 KB) The present research work is undertaken to investigate the erosion behaviour of short bamboo and glass fiber reinforced epoxy based hybrid composites.
- Establishing a Basis for Performance (22.14 KB) To get a useful historical perspective from performance monitoring, several key items must be established. This paper discusses about defining Loop health in terms of performance metrics.
- Evaluation of a Dual-Fluid Cold-Gas Thruster Concept (448.92 KB) A new dual-fluid concept was studied that could eventually find application for cold-gas propulsion for small space satellites or other constant flow applications
- EVALUATION OF MECHANICAL PROPERTIES OF SS 316 L WELDMENTS USING TUNGSTEN INERT GAS WELDING (106.56 KB) This work aims at joining of similar grades of stainless steel by TIG welding with the various parameters like current, bevel angle and gas flow rate.
- Evaluation of the limit load capacity of masonry arch bridges (927.46 KB) A parameterized study of the limit load capacity is necessary to calculate the worst case positioning of any kind of load.
- Exergy Analysis of a Cogeneration Plant (512.68 KB) This study, it is aimed to determine which component of the system should be revised first to raise the efficiency and decrease the loss of exergy.
- Expanded Bed Adsorption: An Option For Energy Savings In Multiple Proteins Purification (193.62 KB) The steady state hydrodynamic behaviour of expanded beds studied.The present study focused on hydrodynamics of multiple particles separation and subsequently can be applied to the multiple proteins separation in a single expanded bed.
- Experimental Analysis and Comparative Performance of Coated and Uncoated Twist Drill Bit Dry Machining (415.09 KB) The comparative performance of commercially available single layer Titanium Aluminum Nitride (TiAlN) and HSS tool for T105CR1 EN31 steel under dry condition is done.
- Experimental and Finite Element Analysis of Base Frame for Rigidity (362.27 KB) In this paper Experimental and Finite Element Analysis of Base Frame for Rigidity is presented. The assurance of rigidity as per API 610 is mandatory for pumps base frame supplied in petrochemical industry.
- Experimental Determination of Dessicant Cooling System for Thermal Comfort (326.51 KB) The main objective of this research work was to assess the feasibilities of utilization of solar energy for regeneration of desiccant wheel by hot air provided by solar air heater.
- EXPERIMENTAL INVESTIGATION OF 2kW HIGH PRESSURE GASIFIER (222.53 KB) A double walled gasifier combining the features of a closed top and an open top gasifier was developed and the performance behavior was investigated at different operating pressures.
- Experimental Investigation of Heat Transfer Characteristics of Cylindrical Fin with Different Grooves (571.98 KB) An experimental study was performed to provide information about the effect of pressure reduction on heat loss from cylindrical fins of three different geometries.
- Experimental Investigation of the Transient Cooling Characteristics of an Industrial Glass Tempering Unit (140.32 KB) In this experimental study the effect of dimensionless jet to jet distance (S/D) and jet to plate distance (H/D) on the cooling time have been investigated.
- Experimental Investigation on Mechanical and Surface Properties of Cr3-C2 Composite coating (402.54 KB) The present work to determine the mechanical properties Young’s modulus and hardness, surface properties surface roughness, surface topology.
- Experimental Investigation On The Enhancement In Thermosyphon Effect Due To Insertion Of Twisted (402.54 KB) The present work deals with experimental studies on heat transfer and flow characteristic for buoyancy induced flow through inclined tubes inserted with twisted strips.
- Experimental Investigations of Heat Pump for Domestic and Light Commercial Market. (164.99 KB) Performance of a 1 TR heat pump capable of catering to air conditioning, heating tap water and cooling potable water is indicated and shows that initial and operating cost can be reduced substantially and simultaneously.
- EXPERIMENTAL STUDY OF TURBULENT LPG TURBULENT INVERSE DIFFUSION FLAME (483.86 KB) The present study investigates the turbulent LPG Inverse Diffusion Flame stabilized in a coaxial burner in terms of flame appearance, visible flame length, centerline temperature distribution, oxygen concentration characteristics.
- EXPERIMENTAL TECHNIQUE TO INVESTIGATE VIBRATION MONITORING (1836.5 KB) In the case of the latter method the mass of the system is lumped into a finite number of masses connected by springs and dampers representing the stiffness and damping in the system respectively.
- Explicit and Implicit TVD High Resolution Schemes in 2D (1638.46 KB) The present work compares the TVD schemes of Roe, of Van Leer, of Yee,Warming and Harten, of Harten, of Yee and Kutler and of Hughson and Beran applied to the solution of an aeronautical problem.
- Exploiting Machine Learning Techniques for the Enhancement of Acceptance Sampling (566.48 KB) This paper proposes an innovative methodology for Acceptance Sampling by Variables, which is a particular category of Statistical Quality Control dealing with the assurance of products quality.
- Externally Assembled Gate-All-Around Carbon Nanotube Field-Effect Transistor (454 KB) In this letter, we demonstrate a gate-all-around single wall carbon nanotube field-effect transistor. This is the first successful experimental implementation of an off-chip gate and gate dielectric
- Failure analysis in locomotive Bogie Brake-Hanger (216.66 KB) This paper deliberates to understand the various failures in locomotive Bogie Brake-Hanger and on root cause analysis for the failure of Brake hanger. In this paper we analyze the characteristics of brake hanger using FEA software.
- Fatigue Analysis of Aluminum Alloy Wheel Under Radial Load (312.84 KB) We find out the total deformation, alternative stress and shear stress by using FEA software. And also we find out the life, safety factor and damage of alloy wheel by using S-N curve. S-N curve is input for a A.356.2 material.
- FATIGUE LIFE ESTIMATION OF A BUTT WELDED JOINT BY S-N APPROACH (351.81 KB) This study presents an upcoming methodology in new three dimensional Finite Element Model to calculate the fatigue life of weld.
- Fatigue Life of an Anti-Roll Bar of a Passenger Vehicle (493.54 KB) In the present paper, Fatigue life assessment of an anti-roll bar component of a passenger vehicle, is investigated by ANSYS 11 software.
- FE Analysis Of Flexural Bearing For Linear Compressor (307.65 KB) This paper deals with the study of flexure bearings in linear compressor and makes theoretical analysis on it to calculate axial stiffness, radial stiffness and parasitic motion.
- Fea Based Study of Effect of Radial Variation of Outer Link in A Typical Roller Chain Link Assembly (435.29 KB) The scope of this paper is to review the applications in the industry and explore the design considerations that go into the design of the assembly.
- FINITE ELEMEMNT MODELING OF SPUR GEAR: A COMPARISON REVIEW (339.73 KB) This paper maximum stress developed Von Mises stress in spur gear is determined for two different materials i.e. S45C steel, Tempered and Sintered BT-126, Bronze under the same loading conditions for comparison of some aspect of materials.
- Finite Element Analysis of Pipe T-Joint (798.54 KB) This paper reports stress analysis of two pressurized cylindrical intersection using finite element method.
- Finite element analysis of tunnel–soil–building interaction using displacement controlled model (798.54 KB) The paper consists of three parts. The first part presents the 3-D finite element numerical model, and the second part provides a full analysis of the construction of a shallow tunnel close to a five level building.
- FINITE ELEMENT MODELLING AND ANALYSIS OF WORKPIECE-FIXTURE SYSTEM (379.41 KB) This work establishes the FEA model of fixture unit assembly to predict fixture unit stiffness and FEA model of rough surface contact to predict contact stiffness.
- Finite Element Simulation of Multi-Stage Deep Drawing Process& Comparison withExperimental Results (1314.86 KB) In this paper, multi-stage deep drawing simulation of an Industrial Part has been presented with finite element method.
- FINITE ELEMENT STRUCTURAL & THERMAL ANALYSIS OF LOCK PLATE (244.44 KB) This paper discuss mainly focused on the analysis of locking plate and its new design so that the human interference must be reduced to higher extent.
- Flow Physics of a Three-Bucket Savonius Rotor using Computational Fluid Dynamics (CFD) (478.99 KB) In this paper, an attempt was made to study the flow physics of a three-bucket Savonius rotor using Fluent 6.0 CFD software.
- Flowshop Scheduling Problem for 10-Jobs, 10-Machines - Heuristics Models Using Makespan Criterion (154.7 KB) This paper models the problem of a flowshop scheduling with the objective of minimizing the make span. The objective is to minimize the makespan of batch-processing machines in a flowshop.
- Fluidity of A713 Cast Alloy with &without Scrap Addition using Double Spiral Fluidity Test: A Comparison (440.89 KB) Recycling of aluminum alloys often decrease fluidity, consequently influence the castability of the alloy. In this study, the fluidity of Al-Zn alloys, such as the standard A713 alloy with and without scrap addition has been investigated.
- Flux and Speed estimation of decoupled induction motor (238.71 KB) This paper presents the rotor flux and speed estimation of induction motor using a novel technique. The induction motor model in rotor reference frame is considered. Controllers used for sensor less control of the drive.
- FORCED DAMPED VIBRATIONS: FREQUENCY RESPONSE CURVE FOR STEEL AND ALUMIMUM BARS (326.2 KB) Unwanted vibration can interfere with our comfort, damage to structures, and reduction of equipment performance and machinery noise level.
- FORECASTING OF OPTIMUM TURNING PARAMETER ON SURFACE ROUGHNESS (136.44 KB) The objective of this research work is to apply taguchi method to investigate the effects of turning parameters such as cutting speed, depth of cut and feed rate on surface roughness, Turning of Al-Al2O3 MMC using TiC coated HSS cutting tool.
- FRACTAL AND COMPARISON OF CHAOS IMPACT OF DUFFING OSCILLATOR PARAMETERS (131.34 KB) This study adopted two popular Runge-Kutta algorithms to investigate the chaotic driven impact of two important parameters of excited Duffing oscillator using fractal disk dimension characterization and comparison.
- Fracture Toughness Characterization of Carbon-Epoxy Composite using Arcan Specimen (1023.33 KB) In this study the behavior of interlaminar fracture of carbon-epoxy thermoplastic laminated composite is investigated numerically and experimentally.
- FRAMEWORK DESIGN FOR A CYCLOTRON VIRTUAL CONTROL PLATFORM (277.4 KB) This paper introduces a new software solution for cyclotron control system design and validation that named Cyclotron Virtual Control Platform (CVCP) and gives implementations in framework design.
- Free Vibration Analysis of Fixed Free Beam with Theoretical and Numerical Approach Method (126.13 KB) This paper focuses on the theoretical analysis of transverse vibration of fixed free beam and investigates the mode shape frequency.
- FREE VIBRATIONS OF NON-HOMOGENEOUS TAPERED SQUARE PLATE (255.15 KB) An analysis is presented to the study the free vibrations of non- homogeneous clamped square plate with bidirectional temperature variations.
- Frequently Asked Questions (734.13 KB)
- Fuel and Greenhouse Gas Emission Reduction Potentials by Appropriate Fuel Switching (135.75 KB) This paper examines the GHG emission reduction potentials in the Canadian electricity generation sector through fuel switching and adoption of advanced power generation systems.
- Fuzzy Hungarian Approach for Transportation Model (148.8 KB) In this paper, a method is proposed to find the fuzzy optimal solution of fuzzy transportation model by representing all the parameters as trapezoidal fuzzy numbers.
- Fuzzy Multi Criteria Decision Making Method for Selection of Optimum Maintenance Alternative (392.39 KB) This paper present a fuzzy approach based on Multi-Criteria Decision-Making (MCDM) methodology for selecting the optimal maintenance alternative.
- Fuzzy-Rule-Based Faults Classification of Gearbox Tractor (1085.86 KB) The vibration signal from a piezoelectric transducer is captured for the conditions of MF 285 gearbox: ‘Healthy Gearbox’ (H),‘Gear with tooth face worn’ (W) and ‘Gear with tooth face broken’ (B), at 700, 1500 and 1800 rpm.
- Gain From Using One of Process Control's Emerging Tools: Power Spectrum (477.08 KB) This paper demonstrates the practical uses of Power Spectrum with examples. Also, an overview of different ways of viewing power spectrum is included.
- Gas-Fired Heating Plant Management (459.74 KB)
- Generalization of SGIP Surface Tension Force Model in Three-Dimensional Flows (563.26 KB) In this paper, the two-dimensional stagger grid interface pressure (SGIP) model has been generalized and presented into three-dimensional form.
- Generation of machined multiple flat surfaces on circular bar by its rotation and in synchronism (871.12 KB) The operation of machining by lathe is one of the most common operations in automobile and machinery industries.
- Generative representations in Structural engineering (1355.72 KB)
- Genetic Algorithm Based Optimal Control for a 6-DOF Non Redundant Stewart Manipulator (568.09 KB) Applicability of tuning the controller gains for Stewart manipulator using genetic algorithm as an efficient search technique is investigated.
- Geometric Conformity Analysis of a 3-D Freeform Objects Produced by Rapid Prototyping (FDM) Process (171.6 KB) In this paper evaluation technique is used to provide an aggregate measure of overall geometric deviation between designed free formed surface and its fabricated geometries using Fused Deposition Modeling (FDM) technique.
- GEOMETRICAL METHODS TO LOCATE SECONDARY INSTANTANEOUS POLES OF SINGLE-DOF INDETERMINATE SPHERICAL MECHANISMS (147.95 KB) This paper shows that a secondary instantaneous pole of a two DOFs spherical mechanism lies on a unique great circle instantaneously.
- GPS Vehicle Theft Tracking and Identification Control System (93.77 KB) In this project, GPS is used to find the position of the vehicle and GSM used to send the message to the specified person whose number is stored in the micro controlled.
- Gyro-effect Extends Earnshaw’s Theorem for Permanent Maglev Stability from Static to Dynamic Equilibrium (235.49 KB) The author applied a self-made passive magnetic bearing to radial pump and turbine machine, and found that if the rotating speed could be higher than a critical value 3250rpm by pump and 1800rpm by turbine.
- HEAT TRANSFER COEFFICIENT BY NATURAL CONVECTION FOR AVAILABLE HEAT SINK (326.51 KB) Measurements have been conducted for experimentally determining the heat transfer co-efficient of a commercially available heat sink employed in electronic circuits.
- Heat Transfer from Two Cam Shaped Cylinders in Tandem Arrangement (566.66 KB) In this study heat transfer of two cam shaped cylinders in tandem arrangement had been investigated.
- Heat Transfer Modeling in Multi-Layer Cookware using Finite Element Method (516.66 KB) In this study the main objectives are to find the best structure (single or multi-layer) and materials to provide maximum temperature degree and uniform TD up side surface of pan.
- High Temperature Oxidation and Carbon Nano Tubes-An Overview (344.96 KB) In this paper a review has been made of the recent studies on the phenomenon of high temperature oxidation of metals, alloys and superalloys and the incorporation of Carbon Nano Tubes into various alloy powder coatings.
- Homogenisation procedure to evaluate the effectiveness of masonry strengthening by CFRP technique (1099.32 KB) In this work masonry walls, made of clay bricks and mortar joints, have been investigated and in particular the effectiveness of CFRP repointing technique is analysed by homogenisation procedure.
- HVAC and Refridgeration Systems II (1143.3 KB)
- HVAC Assessment Handbook (1831.88 KB)
- HVAC Calculations and Duct Sizing (2.57 MB)
- HVAC Systems (97.06 KB)
- HVAC Technical Design Manual (144.1 KB)
- Hybrid Design of a Polymeric Electrothermal Actuator for Microgripper (386.84 KB) The paper presents the development of a new micro actuator for a microgripper which has a combination of asymmetric arm and bi-layer structure to completely eliminate the undesirable out of plane movement.
- Hybrid Electric Vehicle with Flywheel Energy Storage System (647.18 KB) A new hybrid-drive system taking flywheel energy storage system instead of chemical battery as assistant power source for hybrid electric vehicle is put forward.
- Hydrophobicity Loss and Recovery of Silicone HV Insulation (735.04 KB) Most of the silicone materials used for Hv outdoor insulation are high-consistency, heat cured polydimethylsiloxane (PDMS) elastomers. The unique properties of PDMS that make it suitable for HV applications are reviewed.
- Immersive Image Interface to Access Engineering Design and Standards Data (136.17 KB) In this case study an experimental web application will demonstrate how JAVA-based 360-degree immersive imaging can be used to access substation engineering design and construction data
- Impact Energy Absorption of Concentric Circular Tubes (1281.92 KB) This work evaluates the capability of concentric circular tubes in reducing the peak load that is exerted to the protected structures and occupants during impact.
- Impact Of Business Location On Product Quality (424.62 KB) This paper presents and discusses findings of a study that was designed to investigate experimentally the relationship between the quality of arc welding in the Small Scale Metalwork sub-sector and the artisan’s business location.
- Impact of Financial Globalisation on Automobile Industry:An Indian Perspective (431.23 KB) In this paper, we have discussed about the financial impact of globalization in India, Merits and Demerits of Globalization.
- Impact of Joint Sealant Failure (616.78 KB)
- Implementation of Lean Manufacturing Through Learning Curve Modelling for Labour Forecast (214.2 KB) In this paper, an implementation of lean manufacturing through learning curve modelling for labour forecast is discussed.
- Implementation of Prototype Device – Off Grid - Charge Controller – Suitable for Wind Solar Hybrid (214.07 KB) This system will use microcontroller which is an intelligent device, it will switch ON and OFF the MOSFET according to status of battery (whether fully charged or discharged).
- Implementation of Six Sigma Program for Lean Manufacturing (133.94 KB) The motive of this research was establishing connect between Lean manufacturing and Six Sigma, the two powerful pillars of the modern industrial revolution.
- IMPROVEMENT IN CONVENTIONAL WATER JACKET METHOD IN MOULD COOLING USING HEAT PIPE (97.95 KB) The main aim of this proposed work is to improve conventional water jackets methods in mould cooling by the application of heat pipe.
- IMPROVEMENT IN TRIBOLOGICAL PROPERTIES BY IMPROVING GEOMETRY OF REINFORCEMENT PARTICLES†(349.92 KB) This paper focuses on the volume fraction of the heavier Titanium Di-boride particles is controlled by inertial forces upon centrifugalforce processing the semisolid composite.
- Improvement of Energy Efficiency using Porous Fins in heat Exchangers (568.96 KB) The forced convection heat transfer in high porosity metal-foam filled tube heat exchangers are studied in this paper.
- Improving the performance of manufacturing sector-lean methodology and its impact (226.65 KB) This paper will review the current literature and describe how lean methodology can provide a framework mechanism for environmentally sustainable manufacturing sectors.
- Increase of Earth Dia Causing Climatic Change (168.45 KB) In this paper the increase of temperature the diameter of earth increases, that decreases the speed and the spinning of earth; causes climatic change is studied.
- INCREASING FORECASTING ACCURACY OF TREND DEMAND BY NON-LINEAR OPTIMIZATION OF THE SMOOTHING CONSTANT (189.91 KB) Linear Regression is often used for predicting the initial parameters of the forecasting models. But if the underlying demand model is not linear
- Indian Automobile Industry: A Review (277.2 KB) This paper gives an overview of Indian Automobile Industry.
- Influence of Fiber Packing on Transverse Plastic Properties of Metal Matrix Composites (1142.96 KB) The present paper concerns with the influence of fiber packing on the transverse plastic properties of metal matrix composites.
- Influence of Groove Angle in V-groove Butt joints on Transverse shrinkage in CO2 Arc Welding process (81.66 KB) In view of this of experimental analysis of transverse shrinkage in single and double V-groove butt welded joints by varying groove angle and keeping heat input constant in CO2 Arc Welding process.
- Influence of Nanoparticle Shape Factor on Convective Heat Transfer of Water-Based ZnO Nanofluids (322.47 KB) The convective heat transfer of ZnO/water colloidal suspensions is investigated experimentally to appreciate the influence of two shapes of nanoparticles.
- Instability Analysis of Laminated Composite Beams Subjected to Parametric Axial Load (1177.6 KB) The effects of nonconservative loads, shear stiffness, and damping parameters on stability and response of the beams are examined.
- INTEGRITY OF GLASS/EPOXY AIRCRAFT COMPOSITE REPAIRED BY 5 DIFFERENT METHODS (290.45 KB) In this work, an experimental work was carried out to find other viable repair method that could be applied to surface repair of an aircraft.
- Interaction Detection Using Oscillation Analysis (143.69 KB) This paper presents a detailed method of finding the root-cause of plant-wide or unit-wide oscillations, by using oscillation periods and harmonics of each of the participating loops in the unit or plant.
- INVENTION PROTOTYPE OF INDUSTRIAL SARDINE CUTTING MACHINE (363.1 KB) This paper gives the reader an insight in to the work we went through to invent the concept for an automated Industrial Sardine cutting machine.
- Investigation of Simultaneous Heat and Mass Transfer Characteristics of Air Cooled Absorber Chillers (298.52 KB) This study presents the experimental data on the heat and mass transfer process in the absence of heat and mass transfer additive.
- INVESTIGATION OF STRESSES IN ARM TYPE ROTATING FLYWHEEL (304.96 KB) In this paper evaluation of stresses in the rim and arm are studied using finite element method and results are validated by analytical calculations.
- INVESTIGATION OF STRESSES IN FLAT BELT PULLEY BY FEM AND PHOTOELASTICIT (308.93 KB) There are many causes of pulley failure. Among them the maximum bending stress induced in the arm near the hub end is one of the causes of pulley failure.
- INVESTIGATION OF STRESSES IN MASTER LEAF OF LEAF SPRING BY FEM AND ITS EXPERIMENTAL VERIFICATION (675.14 KB) In this work evaluation of stresses in master leaf over the span is studied using finite element method and strain gauge technique.
- INVESTIGATION ON MECHANICAL PROPERTIES OF A356 NANOCOMPOSITES FABRICATED BY ULTRASONIC ASSISTED CAVITATION (561.77 KB) This paper presents mechanical properties of A356 matrix nano composites fabricated by reinforcing nano silicon carbide (SiC) particles at 0.1 to 0.5 weight percent with the aid of ultrasonic cavitation.
- Investigation on Performance& Emission Characteristics of CI Engine Fuelled with Producer Gas,Esters (431.37 KB) In this study, the virgin biomass obtained from hingan shell is used as the feedstock for gasifier to generate producer gas.
- Investigation to Evaluate the Effectiveness of Air and Co2 in Impingement Cooling of Electronic Equipment (140.32 KB) Experimental investigation is conducted to examine the characteristics of forced convective heat transfer from electronic components, subjected to a confined impinging circular jet of Air and CO2.
- INVESTIGATIONS ON FINISH TURNING OF AISI 4340 STEEL (809.83 KB) This paper presents the effects of minimal quantity lubrication (MQL) on the turning performance of AISI 4340 steel as compared to dry and wet machining in terms of surface roughness,
- INVESTIGATIONS ON MRR & SURFACE ROUGHNESS OF EN 19 & SS 420 STEELS IN WIREEDM (364.4 KB) A solemn attempt is made in this paper to investigate the response parameters, viz., Material Removal Rate (MRR) and Surface Roughness (Ra) a by experimentation on EN 19 & AISI 420 (SS420) Steels in Wire-EDM process.
- Investigations On The Influence Of Process Parameters On Damage Factor During Drilling Of Glass Fiber Reinforced Composites (85.54 KB) Drilling is an essential operation during the assembly of the structural frames of automobiles and aircrafts made of fiber reinforced composites. T
- Investment Casting – Rapid Tooling Approach (347.83 KB) This work investigates the shell crack and counter. In this work pattern are modeled on rapid prototyping machine.
- ISFET, Theory and Practice (859.92 KB) Biomedical engineers exploited as the first the possibilities of the chip technology to develop silicon based sensors
- JOB SHOP RE- SCHEDULING USING GENETIC ALGORITHM – A CASE STUDY (40.15 KB) In this present work, a rescheduling is done for the existing jobshop in a small scale industry and this problem is solved using the non-traditional optimization technique like Genetic Algorithms.
- KNOWLEDGE MANAGEMENT IMPLEMENTATION STEPS FOR INDIAN SMALL & MEDIUM SIZED (81.56 KB) This paper presents review of literature on Knowledge management (KM) in small and medium sized enterprises (SMEs).
- Large-Deflection Analysis of Automotive Vehicle’s Door Wiring Harness System (571.03 KB) This article gives some insight into the dimensioning process, with special focus on large deflection analysis of wiring harness(W/H) in vehicle’s door structures for durability problem.
- Liquid Process Pipelines (1623.98 KB)
- LOW VELOCITY IMPACT ANALYSIS OF LAMINATED FRP COMPOSITES (353.26 KB) The present work is aimed at gaining an initial understanding of the impact behavior of fiberglass reinforced laminates with vinylester and is polyester resins.
- Machine Mounting for Vibration Attenuation (104.83 KB)
- Mass correlation of engine emissions (417.32 KB)
- Material Characterization of 316L Stainless Steel After Being Subjected To Cryogenic Treatment (350.55 KB) The current study aims at investigating the properties of stainless steel of grade 316L after being subjected to deep cryogenic treatment.
- Material of Structure affecting the Frequency Analysis using FEM Package (236.03 KB) In the present investigation, efforts have been made to find effect material on cantilever beam under vibration.
- Material Specific Product Design Analysis for Conditional Failures – A Case Study (118.04 KB) In the present study, the analyses of roller and shaft have been done using Finite Element Method.
- Mathematical Model of Gold Lixiviation (258.54 KB) Processing of different refractory gold ores by wet chlorination, followed by chloroauric complex (HAuCl4) separation by adsorbtion on macroporous polymers (ion exchange resin) was studied and patented by INCDMRR
- Maximum Recommended Weight Limit for Manual Lifting Task in Industry through Taguchi Parametric Technique (210.75 KB) In this paper Authors have tried to calculate the maximum Recommended Weight Limit (RWL) for manual lifting task in industry on the basis of revised Load constant (LC), Horizontal Multiplier (HM), Vertical Multiplier (VM).
- Measuring the Creep and Material Properties of Cement Paste Specimens (1373.74 KB) The paper describes creep tests of the small specimen, and analyses the material properties of cement pastes. Material properties were tested in compression tests.
- MEASURING THE PROCESS EFFICIENCY OF CONTROLLED WELDING PROCESSES (289.62 KB) In this paper we compare a liquid nitrogen calorimeter with an insulated box calorimeter for measuring the process efficiency of Fronius CMT, Lincoln STT and Rapid Arc, Kemppi FastRoot and standard pulsed GMAW.
- Mechanical and Micro-structural Study of Friction Stir Welding of Al-alloy (510.34 KB) The proposed research will include experiments related to the effect of FSW optimum process parameter on weldability of Al alloy.
- Mechanical and Optical Properies of Poly Lactic Acid Modified Linear- Low Density Polyethylene (881.95 KB) Melt blending of linear low density polyethylene and polylactic Acid and Low density poly ethylene were performed in a twin screw extruder with post extrusion blown film. The blend compositions were optimized by mechanical properties.
- Mechanical Behaviour of Polypropylene And Human Hair Fibres & Polypropylene Reinforced Polymeric Composites (154.26 KB) In this paper, it is shown that human hair fibre act to reinforce the PP polymer matrix.
- MECHANICAL PROPERTIES OF GREEN COCONUT FIBER REINFORCED HDPE (240.46 KB) These natural fibers offer a number of advantages over traditional synthetic fibers. The present study aims to determine the mechanical properties namely, Tensile strength (TS),Flexural strength (FS),
- Merging Autopilot/Flight Control and Navigation-Flight Management Systems (19.67 KB) In this abstract the Autopilot Flight Director System (APFDS), Flight Control System (FCS) and Flight Management Systems (FMS) will be merged together to eliminate more connections and electrical consumption.
- METER SELECTION FOR VARIOUS LOAD REQUIREMENTS (229.66 KB) This paper is intended to provide meter station designers with a basic methodology for selection of an appropriate flow meter (or meters) for a given application.
- Method for Determining the Probing Points for Efficient Measurement of Freeform Surface (423.56 KB) In this paper a method is presented for determining the sampled points size and location for achieving efficient sampling.
- Micromachining with ECDM: Research Potentials and Experimental Investigations (1318.58 KB) The present paper gives a critical review on materials machined by ECDM under the prevailing machining conditions; capability indicators of the process are reported.
- Minimization Of Rewok In Belt Industry Using Dmaic (211.64 KB) The paper deals with an application of Six Sigma DMAIC methodology in an industry which provides a framework to identify, quantify and eliminate sources of variation in an operational process.
- Modeling and Analysis of Acoustic Emissions and Structural Vibration in a Wind Turbine (1220.88 KB) This paper presents the measurement, analysis, modelling and solution simulation process when tackling a tonal noise issue in a megawatt scale wind turbine.
- MODELING AND CHARACTERIZATION OF A VIRTUAL IMPACTOR (169.15 KB) In this current study, an approximate analytical expression relating to the collection efficiency and mean aerodynamic diameter of particles ot virtual impactor collected has been developed.
- Modeling of Biodiesel Plant Design: Data Estimation and Generation Based on Suppositions and Interpolation (354.75 KB) This paper presents the approach for the Biodiesel plant design data estimation and generation to support the mathematical formulation of the model.
- Modeling Parametric Vibration of Multistage Gear Systems as a Tool for Design Optimization (507.07 KB) This work presents a numerical model developed to simulate the dynamics and vibrations of a multistage tractor gearbox.
- Modelling District Energy Distribution System For Least Load Shedding (164.94 KB) A case study for local energy distribution company urban division was taken & evaluated for shortfall in Electrical energy supply.
- Modelling of Serpentine Continuous Flow Polymerase Chain Reaction Microfluidics (160.42 KB) This paper presents a CFD modelling of a continuous flow serpentine PCR device with narrow and wider channels.
- MODELLING OF TRAFFIC CONSTABLE COMFORT LEVEL VARIATION IN NCR REGION BY FUZZY EXPERT SYSTEM (275.88 KB) This paper is an attempt for the measurements of noise levels, under traffic conditions over different time span in NCR zone.
- MODIFICATION OF SURFACE MESH FOR THE GENERATION OF KNIFE ELEMENT FREE HEXAHEDRAL MESH (347.29 KB) Hexahedral elements provide greater accuracy and efficiency over tetrahedral elements for finite element analysis of solids and for this reason the all-hexahedral element auto meshing has a growing demand.
- Monte Carlo Simulation in Thermal Radiative Transfer: Method Review (199.05 KB) This work deals with thermal radiative estimates for hot grey diffuse surfaces and grey participative media.
- Monte Carlo Technique for Analysis of Tolerance & Allocation of Reciprocating Compressor Assembly (405.5 KB) In the present study Monte Carlo Simulation technique is applied to predict assembly tolerances with different statistical distributions for parts and components assemblies.
- Motion Control System for Motorized Robot Arm And Analysis of The Arm By Using Ansys (639.83 KB) In this paper the Motion control is one of the technological foundations of industrial automation.
- Movement of Location of Tip Vortex Cavitation along Blade Edge due to Reduction of Flow Rate (537.02 KB) In this paper the results of our experimental investigation about movement of tip vortex cavitation along blade edge due to reduction of pump flow rate in an axial pump is reported.
- Multi - Agent Based Artificial Intelligent Process Control (493.78 KB) The main goal of the proposed system is the flow control of the multi - agents and their distributed problem solving using tow (AI) technologies combinations
- MULTIBODY DYNAMIC ANALYSIS AND SIMULATION OF ENGINE MODEL (141.46 KB) An assembly model for the internal combustion engine model has been proposed. The basis for the model is a study of earlier designs.
- MUSCULOSKELETAL DISORDER AMONG WORKERS IN SMALL SCALE FORGING INDUSTRY (144.05 KB) In this study we had surveyed 10 small scales forging industries and randomly selected 102 workers among these industries.
- Natural and Mixed Convection Heat Transfer Cooling of Discrete Heat Sources (860.89 KB) Steady state experiments have been conducted for natural and mixed convection heat transfer, from five different sized protruding discrete heat sources, placed at the bottom position on a PCB and mounted on a vertical channel.
- Non-linear Analysis and Stability of the Automotive Suspensions with neo–Hookean Elements (1073.93 KB) In this work we present two systems with non-linear neo–Hookean components. In such systems there always exists an element with a non-linear characteristic equation.
- Non-linear mathematical models for the jets penetrating liquid pool of different density (984.71 KB) The problem of modelling and simulation for the jets penetrating pool of other liquids is considered under different physical conditions and situations.
- Novel Metaheuristic Algorithms Applied to Optimization of Structures (836.32 KB) This paper aims at to evaluate the performance in engineering problems of two of the most recent metaheuristic algorithms developed in the last decade.
- Numerical Analysis of the Influence of Airfoil Asymmetry on VAWT Performance (1459.3 KB) This paper presents a model for the evaluation of energy performance and aerodynamic forces acting on a three-bladed small vertical axis Darrieus wind turbine depending on blade chord curvature with respect to rotor axis.
- NUMERICAL ANALYSIS OF TRAPEZOIDAL SHAPE DOUBLE LAYER MICROCHANNEL HEAT SINK (1459.3 KB) In this study the performance of trapezoidal shape double layer microchannel heat sink is investigated and compared to rectangular double layer heat sink of same flow area.
- Numerical Analysis of Turbulent Natural Convection in a Square Cavity using Large- Eddy Simulation (332.64 KB) In this paper Lattice Boltzmann simulation of turbulent natural convection with large-eddy simulations (LES) in a square cavity which is filled by water has been investigated.
- Numerical Simulation of a Single Air Bubble Rising in Water of Surface Tension Force (520.42 KB) In this paper, various models of surface tension force for interfacial flows, the CSF, CSS, PCIL and SGIP models have been applied to simulate the motion of small air bubbles in water and the results were compared and reviewed.
- Numerical Simulation of Fibre Orientation in Simple Injection Molding Processes (520.42 KB) The aim of the paper is to develop a Computational Fluid Dynamics (CFD) model to simulate and characterise the fiber suspension flow in two dimensional mold cavities.
- NUMERICAL SIMULATION OF FLUID FLOW (1767.25 KB) This paper details immersed boundary method (IBM) to facilitate numerical investigation of the laminar forced fluid flow over a forward-backward facing step through a 2D channel
- Numerical Simulation of Forging Process Using the Hybrid PCM/FEM (816.64 KB) In this paper, for analyses of metal forming problems, a point collocation method (PCM) with a boundary layer of finite element is developed.
- Numerical Simulation of the Flow Field around a Vertical Flat Plate of Infinite Extent (520.42 KB) This paper presents a CFD analysis of the flow field around a thin flat plate of infinite span inclined at 90° to a fluid stream of infinite extent.
- Numerical Study of MHD Effects on Drop Formation in a T-Shaped Microchannel (382.07 KB) The effect of a uniform magnetic field on the formation of drops of specific size has been investigated numerically in a T-shaped microchannel.
- Numerical Study of Natural Convection Effects in Latent Heat Storage using Aluminum Fins, Spiral Fillers (702.13 KB) This paper presents extensive computational visualizations on the PCM melting patterns of the proposed fin-spiral fillers configuration.
- Numerical Study on the Performance Characteristics of Hydrogen Fueled Port Injection Internal Combustion Engine (868.65 KB) This study describes the engine performance of single cylinder hydrogen fueled port injection internal combustion engine in which the ability of retrofitting the traditional engines with hydrogen fuel with minor modifications.
- Observing Boiler Safety Rules (41.34 KB)
- On the Dynamics of a Planetary Transmission for Renewable Energy Systems (1062.41 KB) The dynamic model of the chain speed increaser is presented in the paper based on Lagrange and Newton-Euler methods.
- On The Influence of Residual Stresses on Fatigue Fracture of Railway Axles (1.93 MB) The purpose of present research is to numerically predict the lifetime of axles used for railway tank wagons in various theoretical conditions.
- Operational- Economics Based Evaluation And Selection of A Power Plant Using Graph Theoretic Approach (1150.6 KB) This paper presents a methodology for operational and economic characteristics based evaluation and selection of a power plant using Graph theoretic approach.
- Optimal Allocation for Reliability Analysis of Series Parallel System using Dynamic Programming (217.55 KB) In this paper, the optimal allocation for series parallel Reliability Logic Diagram of a system is considered. The deterministic Dynamic Programming approach for Reliability optimization has been used.
- OPTIMAL BLOCK REPLACEMENT DECISION OF AIR CONDITIONERS (117.51 KB) In this paper, a mathematical model has been developed for group replacement of a block of Air Conditioners using discrete-time First Order Markov Chains.
- Optimal Design of Airfoil with High Aspect Ratio in Unmanned Aerial Vehicles (858.93 KB) Shape optimization of the airfoil with high aspect ratio of long endurance unmanned aerial vehicle (UAV) is performed by the multi-objective optimization technology coupled with computational fluid dynamics (CFD).
- Optimal Low-Thrust Trajectories to Reach the Asteroid Apophis (889.66 KB) The present research has the goal of finding optimal (in the sense of minimum fuel consumption) interplanetary missions, based in low thrust propulsion systems to send a spacecraft to Apophis.
- OPTIMAL TRAJECTORIES TOWARDS NEAR-EARTH-OBJECTS USING SEP (1135.74 KB) In this work the optimization of interplanetary missions using solar electric propulsion (SEP) and Gravity Assisted Maneuver to reduce the costs of the mission, is considered.
- Optimal Two-Time Scale Controller for a Missile Autopilot (440.45 KB) In this paper, two-time scale method is used to control a 6-DOF missile autopilot. The mathematical model is developed using the singular perturbation theory.
- Optimization and Statistical Analysis of Machining Parameters for Tool Wear Rate on EN-19 Alloy Steel (126.01 KB) In this paper, an attempt has been made to machine the EN-19 alloy steel by using rectangular shaped copper electrode perform on electrical discharge machine.
- OPTIMIZATION OF ABRASIVE WATER JET MACHINING PROCESS PARAMETERS (285.55 KB) In this paper, Taguchi method is applied to find optimum process parameter for Abrasive water jet machining (AWJM).
- OPTIMIZATION OF CAPACITATED VEHICLE ROUTING PROBLEM USING PSO (230.53 KB) This paper presents solution techniques for Capacitated Vehicle Routing Problem (CVRP) using metaheuristics. Capacitated Vehicle Routing Problem is divided into set of customers called cluster,
- Optimization of Cutting Conditions in End Milling Process with the Approach of Particle Swarm Optimization (93.65 KB) In this paper, four input variables are selected and surface roughness is taken as output variable. Particle swarm optimization technique is used for finding the optimum set of values of input variables.
- Optimization of Fuel Consumption of a Bus used in City Line with Regulation of Driving Characteristics (448.86 KB) This study analyses the fuel consumption of two trips of city bus operating on its common route and determines the effect of traffic density and driving characteristics on fuel consumption.
- Optimization of Grinding Parameters for Minimum Surface Roughness by Taguchi Parametric Optimization. (431.78 KB) The Experiments are conducted on universal tool and cutter grinding machine with L9 Orthogonal array with input machining variables as work speed, grinding wheel grades and hardness of material.
- OPTIMIZATION OF HEAT TREATMENT PROCESS FOR 16MnCr5 (111.46 KB) In this paper a comparative statement has been made for obtaining maximum yield strength and hardness for a highly stressed environment parts and optimum value has been selected for 16MnCr5 material with number of heat treatment processes.
- Optimization of kirloskar petrol engine performance by using open engine control unit (126.91 KB) This paper deals with developing test bench which will give us idea about how to tune engine parameters and also give the flexibility to change the parameters electronically.
- OPTIMIZATION OF PHOTOCHEMICAL MACHINING (204.37 KB) This paper presents the machining of Oxygen-Free High Conductivity (OFHC) copper using Photochemical Machining (PCM).
- OPTIMIZATION OF RESISTANCE SPOT WELDING PARAMETERS USING TAGUCHI METHOD (204.37 KB) In this investigation the quality characteristic (tensile strength) has been considered using Taguchi Method.
- Optimization of Shielded Metal Arc Welding Parameters for Welding of Pipes by using Taguchi Approach (128.41 KB) The objective of this paper is to Design Parameters for Shielded Metal Arc Welding to ensure no leak to occur during the process.
- OPTIMIZATION OF WELD PENETRATION PROBLEM IN BUTT WELDED JOINTS (127.84 KB) The SIF & SCF are evaluated at lack of penetration defects for doubleV, singleV, doubleJ, and singleJ butt welded joints subjected to axial loading with varying defect length (LOP) to plate thickness ratios to find an acceptable defect length.
- OPTIMIZING CYCLE TIME OF DVD-R INJECTION MOULDING MACHINE (222.06 KB) This paper describes the cycle time reduction approach of injection moulding machine for DVD manufacturing.
- OPTIMIZING SURFACE ROUGHNESS IN TURNING OPERATION USING TAGUCHI TECHNIQUE AND ANOVA (73.77 KB) In our study, an attempt has been made to generate a model to predict Surface Roughness using Regression Technique.
- Optimum determination of partial transmission ratios of three-step helical gearboxes (665.5 KB) In this paper,optimization and regression techniques for optimum determination of partial ratios of three-step helical gearboxes to getminimum gearbox length, minimum gearbox cross section dimension and minimum mass of gears is presented.
- Optimum Surface Roughness Prediction in Face Milling of High Silicon Stainless Steel (389.64 KB) This paper presents an approach for the determination of the optimal cutting parameters leading to minimum surface roughness in face milling of high silicon stainless steel by coupling neural network and Electromagnetism-like Algorithm.
- Parallel-Sparse Symmetrical/Unsymmetrical Finite Element Domain Decomposition Solver (997.39 KB) Details of parallel-sparse Domain Decomposition (DD) with multi-point constraints MPC) formulation are explained. Major computational components of the DD formulation are identified.
- PARAMETERS EFFECTING ON NOISE REDUCTION IN RECIPROCATING COMPRESSOR (140.32 KB) In this work a screening test is carried out to find the relative effect of the parameters which can be used as an initial step for further investigations on the most influencing parameters and their interactions using Taguchi Technique.
- Parametric investigation in co2 laser cutting Quality of hardox-400 materials (693.72 KB) This article presents a preliminary study to evaluate the effect of the processing parameters (laser power, Gas pressure, Nozzle diameter and cutting velocity) under the quality of the cut for several hardox-400materials.
- Parametric optimization of CNC Drilling machine for mild steel using Taguchi design machine for mild steel using Taguchi design (125.61 KB) In this paper the drilling of mild steel with the help of CNC drilling machining operation with tool use high speed steel by applying taguchi methodology has been reported.
- PARTIAL SUBSTITUTION OF DIESEL IN ENGINE-GENERATOR SETS WITH PRODUCER GAS (92.66 KB) In the experiments, both DG sets were operated in fully diesel and dual fuel modes. Diesel Consumption Rate, Diesel Replacement Percentage, Specific Diesel Consumption, Electrical Conversion Efficiency were calculated for the DG sets.
- Particle Swarm Optimization and the Genetic Algorithm on the Geometry Design of Longitudinal Fin (722.79 KB) In the present work, the performance of the particle swarm optimization and the genetic algorithm compared as a typical geometry design problem.
- Perfect Plastic Deformation of Circular Thin Bronze Plate due to the Growth,.Collapse of a Vapour Bubble (550.54 KB) Dynamics of a vapour bubble generated due to a high local energy input near a circular thin bronze plate in the absence of the buoyancy forces is numerically investigated in this paper.
- Performance & Evaluation of Industrial Solar Cell w.r.t. Temperature and Humidity (297.81 KB) This paper summarizes test procedures, results, and implications of in-depth investigations of the performance and efficiencies characteristics of commercial solar cells.
- Performance and Emission Characteristics of Heptane/Toluene Blends at Constant Injection Operation on a CI Engine (362.63 KB) In this paper, heptane is blended with toluene to examine the influence of a better ignition quality fuel on a poor ignition quality hydrocarbon.
- PERFORMANCE AND EMISSIONS OF C.I. ENGINE USING BLENDS OF BIODIESEL AND DIESEL (1172.87 KB) The performance parameters evaluated were brake thermal efficiency, break specific fuel consumption and the emissions measured were carbon monoxide (CO), carbon dioxide (CO2), hydrocarbon (HC), and oxides of nitrogen (NOx).
- PERFORMANCE AND EXHAUST GAS EMISSIONS ANALYSIS OF DIRECT INJECTION CNG-DIESEL DUAL FUEL ENGINE (229.46 KB) The main objective of the present study is to investigate the effect of Exhaust Gas Recirculation, intake air temperature, rate of injection of pilot fuel quantity, intake air throttling and substitution of CNG
- PERFORMANCE COMPARISON OF CONVENTIONAL AND COMPOSITE LEAF SPRING (1172.87 KB) The objective of this paper is to present a general study on the performance comparison of composite (Glass Fibre Reinforced plastic - GFRP) leaf spring and conventional leaf spring.
- Performance evaluation of a diesel engine fueled with methyl ester of castor seed oil (91.74 KB) The performance characteristics of Castor methyl ester (CME) shows close to diesel is studied.
- PERFORMANCE EVALUATION OF A FOUR STROKE COMPRESSION IGNITION ENGINE (222.52 KB) The performance characteristics with normal manifold and helical threaded manifolds were calculated and compared.
- PERFORMANCE EVALUATION OF C.I. ENGINE WITH COTTON SEED OIL (222.52 KB) The paper describe the comparative performance of single cylinder diesel engine with direct use of cotton seed oil methyl ester and preheated condition at variable temperature such as 50, 70 and 90oC.
- Performance evaluation of composite marine propeller using L8 orthogonal array (121.17 KB) This work aims at understanding the effect of various parameters on the performance of a marine propeller using L8 orthogonal array. T
- Performance Evaluation of Powder Metallurgy Electrode in Electrical Discharge of AISI D2 Steel (222.52 KB) In this paper an attempt has been made to correlate the usefulness of electrodes made through powder metallurgy (PM) in comparison with conventional copper electrode during electric discharge machining.
- Performance Evaluation of Solar Still Coupled to an Evacuated Tube Collector type Solar Water Heater (222.52 KB) The main objective of this project is to effectively utilize the solar water heater for solar still productivity enhancement, which works as a hybrid system.
- Performance Modeling and Availability Analysis of Ammonia Cylinder Manufacturing Plant (543.95 KB) In the present work, time dependent availability and steady state availability of ammonia cylinder manufacturing plant is estimated.
- PERFORMANCE OF DISC TURBINE (415.04 KB) Tesla disc turbine and a flexible testrig have been designed and manufactured, and experimental results are presented. An analysis of the performance and efficiency of the disc turbine is carried out.
- PERFORMANCE OF HEAT PIPE FOR DIFFERENT WORKING FLUIDS AND FILL RATIOS (117.64 KB) An attempt is made to design, fabricate and test a miniature heat pipe with 5 mm diameter and 150 mm length with a thermal capacity of 10 W.
- PERFORMANCE SIMULATION OF COLD STORAGE USING ENERGYPLUS (299.56 KB) The present work deals with the study of cold storage refrigeration plant and simulation of refrigeration system to evaluate the cooling load and annual energy consumption for cold storage applications.
- PERFORMANCE STUDY OF A TWO STAGE SOLAR ADSORPTION REFRIGERATION SYSTEM (623.94 KB) The present study deals with the performance of a two stage solar adsorption refrigeration system with activated carbon-methanol pair investigated experimentally.
- Performance Study of an Airlift Pump with Bent Riser Tube (1083.55 KB) This work presents a numerical investigation into necessary ways to reduce momentum loss associated with local bends of the riser tube section of the airlift pump and consequently an improvement in pump performance would be attained.
- PERFORMANCE STUDY OF METHANOL BLENDED PETROL IN SI ENGINE (1083.55 KB) In this study, methanol was used to increase performance and decrease emissions of a single-cylinder engine.
- Physical Modeling of Oil Well Fire Extinguishing using a Turbojet on a Barge (463.82 KB) This article proposes innovative approach in fire extinguishing techniques in oil and gas industry, especially applicable for burning oil wells located offshore.
- POOL BOILING OF WATER OVER A STAINLESS STEEL FLAT PLATE HEATER (298.97 KB) The purpose of this experiment is to study heat transfer characteristics of water through pool boiling over a flat stainless steel plate heater.
- POWER GENERATION FROM PRESSURE REDUCTION IN THE NATURAL GAS SUPPLY CHAIN IN BANGLADESH (246.13 KB) Power can be generated from the pressure energy of natural gas along its supply chain at various pressure reduction points by using turbo-expanders.
- PREDICTION OF PRESSURE DROP IN HELICAL COIL (1713.69 KB) Single helical coil with five different helix angles were used in this study to identify the effect of helix angle on pressure drop.
- PREDICTION OF WELD BEAD PENETRATION FOR STEEL USING SUBMERGED ARC WELDING PROCESS PARAMETERS (119.09 KB) In these research paper the Design of experiment using 2-level full factorial technique has been used to conduct experiments and to develop relationships mathematical models for predicting
- Present of Three-layered hydro-forming analysis of a new hybrid sandwich tubes using finite element method (1470.74 KB) In this paper, three-layered new sandwich tube (inner layer of copper, middle layer of aluminum foam and outer layer of annealed brass) hydroforming processes were numerically simulated using finite element method by ABAQUS/Explicit 6.10.
- PROBLEMS IN ELECTRIC VEHICLES (690.36 KB) The main concept of this paper is having the battery exchange stations to exchange the charge dried batteries to fully charged batteries.
- PROCESS OPTIMIZATION OF FRP SANDWICH COMPOSITE STRUCTURE FOR ENGINEERING APPLICATION (447.41 KB) The test conducted according to ASTMD & DIN standard as a result it shows that the stabilized FRP sandwich having excellent mechanical properties compare to core crushing FRP sandwich.
- PRODUCTIVITY IMPROVEMENT IN BREWERIES BY LINE BALANCING HEURISTIC METHOD (125.16 KB) The aim of this paper is to balance the Production line of Champion lager beer.
- Profile Modification for Increasing the Tooth Strength in Spur Gear using CAD & CAE (681.93 KB) In this project we are optimizing the gear profile geometry by using CAD &CAE and improving the gear tooth strength.
- Programmable Stopping Device Design for Sled Test (368.66 KB) This paper presents sled test programmable stopping device design by use of metal crush tubes which is of low cost and it is more feasible over other stopping device.
- PROGRAMMING APPROACH TO INVESTIGATE THE EFFECT OF FIELD VARIABLE FOR NUMERICAL APPROXIMATION TECHNIQUES (205.34 KB) In the present paper the numerical techniques like Direct Integration, Method of Weighted Residuals, Ritz Method and FEM are used to determine the deviation in the field variable at the selected node position.
- Proposed Methodological Improvement in the Elucidation of Chemical Reaction Mechanisms (64.37 KB) recent book by Roald Hoffmann, entitled The Same and Not the Same, is a popular exposition of the achievements,methodology, and reasoning in chemistry
- PYROLYSIS MODELLING AND EXPERIMENTATION FOR THERMO-PHYSICAL PROPERTIES (176 KB) A computer program has been developed to predict the pyrolysis and thermal response in ablative materials.The results are verified by performing experiments conducted at the test facility in Vikram Sarabhai Space Centre.
- QUANTIFICATION OF ERRORS IN THE WILSON PLOT APPLIED TO CONDENSATION ON THE OUTSIDE OF TUBES (222.57 KB) In condensation over horizontal tubes where the wall temperature is not measured directly, the Wilson plot is used to determine the cooling side heat transfer coefficient.
- Quantitative and qualitative study on state of stresses and strains of strength structure of crane bridge (1369.54 KB) This paper work is meant for checking out the limit state of the structure subject to normal operation, which involved the evaluation of its reaction while under working in terms of quantity and quality.
- RANKING OF MANUFACTURING SYSTEM CRITERIA (98.3 KB) In this paper, we have discussed the most appropriate criterion for good manufacturing systems with the help of a survey that indentified the importance of seven different criteria according to the experts experience.
- REAL TIME FUEL INJECTION IN SI ENGINE USING ELECTRONIC INSTRUMENTATION (219.33 KB) This paper deals with the static and dynamic fuel injection characteristics of two gasoline fuel injectors.
- Real Time Orbit Determination with Different Force Fields (939.35 KB) In this work, it is proposed to estimate, in real time,orbital state vector composed by position, velocity, bias ,drift of the GPS receiver clock on board satellites by processing raw navigation solution obtained by on-board receiver.
- Reconstruction of the Most Energetic Modes in a Fully Developed Turbulent Channel Flow (477.44 KB) The reconstructed second-order moments of velocity, temperature, and density from POD eigenfunctions compare favorably to the original Direct Numerical Simulation(DNS) data.
- Reliability and Availability Analysis of Uncaser System in A Brewary Plant (388.42 KB) The paper discusses the availability and reliability analysis of an uncaser system in brewery plant by using the concept of performance analysis.
- REMOVAL OF PB AND CO FROM GROUND WATER IN TADA INDUSTRIAL ESTATE (300.91 KB) In this study, the removal of heavy metals (Pb and Co) from Nippo Battery Industry (TADA, A.P.) effluent was investigated in batch condition.
- RENEWABLE ENERGY BASED AGRICULTURAL ROBOT (212.52 KB) This paper deals with how to mechanize agricultural process through electronic and embedded components.
- Research on increasing the lastingness of a rolling bridge (1147.9 KB) The paper’s purpose is to analysis the stresses and strains state in the strength structure of a rolling bridge, presenting a fast and evaluated computer aided solving method for complex static indeterminate structures.
- Research on the Stability Problem of Hydroelectric Station Penstock under External Pressure (777.21 KB) This paper provides an efficient solving path for stability problem of reinforcing ring steel penstock under external pressure.
- Resistance of Thin-walled Plate Girders under Combined Bending and Shear (1759.9 KB) The objective of the paper is to analyze the influence of initial imperfections on the behavior of thin-walled girders welded of slender plate elements.
- RETROFITTED STANDALONE SOLAR VAPOUR ABSORPTION REFRIGERATOR (359.31 KB) This study attempts to convert a commercially available VARS into a standalone, portable solar-operated unit. Temperatures at the entry and exit of Generator, Rectifier, Condenser, Evaporator and Absorber.
- REVIEW ARTICLE ON PHYSICAL AND NUMERICAL MODELLING OF SEN AND MOULD FOR CONTINUOUS SLAB CASTING (132.41 KB) In this paper,the performance of Submerged Entry Nozzle (SEN) and mould of continuous slab caster is studied.
- REVIEW OF DRESSING AND TRUING OPERATIONS FOR GRINDING WHEELS (263.44 KB) The unconventional techniques with in-process configuration were developed that have several advantages over their conventional counterparts.
- REVIEW OF PERFORMANCE AND ANALYSIS OF ISI FLAT PLATE COLLECTOR WITH MODIFIED FLAT PLATE COLLECTOR (33.32 KB) This paper is based on review of comparative performance and analysis of ISI flat plate collector with modified flat plat collector.
- Robust Adaptive Vibration Control with Application to a Robot Beam (427.91 KB) This paper presents the adaptive control scheme with sliding mode compensator for vibration control problem in the presence of disturbance.
- Robust Control of F-16 Lateral Dynamics (382.51 KB) This paper considers the application of a conditional integrator based continuous sliding mode control design for robust regulation of MIMO minimum-phase nonlinear systems to the control of the lateral flight dynamics of an F-16 aircraft.
- Robust Controller Design for the Automotive Climate System (297.37 KB) This paper deals with automotive climate control using optimal control theoryAutomobile Compartment temperaturescontrolled by varying compressor capacity and the positionof the air mixing damper.
- Robust Feedback Stabilization of Chemical Reactors (382.72 KB) This paper deals with the temperature stabilization of a large class of continuously stirred tank chemical reactors.We design state feedback controllers
- Robust Integrated Design for a Mechatronic Feed Drive System of Machine Tools (758.23 KB) This paper aims at to develop a robust optimization methodology for the mechatronic modules of machine tools by considering all important characteristics from all structural and control domains in one single process.
- Roller Guide Design and Manufacturing for Spatial Cylindrical Cams (679.3 KB) This paper was aimed at developing a computer aided design and manufacturing system for spatial cylindrical cams.
- Rotor Bearing System Analysis Using the Transfer Matrix Method with Thickness Assumption (450.08 KB) In this paper the dynamics of a rotor-bearing system is analyzed, considering the gyroscopic effect.
- Seismic Analysis on Cylindrical Tanks Subjected to Horizontal Acceleration (220.55 KB) Mechanical equations describing the fluid motion are developed and simplified by use of small amplitude wave approximations, enabling expressions for the different modes of vibrations and the free surface displacements to be obtained.
- Seismic retrofit schemes (481.73 KB)
- Selection of optimum Drilling Parameter in Drilling of commercial Acrylic sheet (114.57 KB) The purpose of this paper is to investigate the effect of cutting parameters, such as cutting speed and feed rate, and point angle on hole size.
- Setup Planning Automation of Turned Parts Based on STEP-NC Standard (254.65 KB) This paper will present an automatic setup planning module integrated in a CAPP system for rotational parts to be machined on a lathe.
- Shock Response Spectrum Testing for Commercial Products (993.67 KB)
- Simulation and Analysis of Biogas operated Double Effect GAX Absorption Refrigeration System (123.97 KB) A thermodynamic simulation of a double effect generator heat exchanger absorption refrigeration cycle using biogas as source of energy has been carried out.
- Simulation and Modeling of Physical Vapor Deposition (PVD) Process (880.09 KB) We review the physical vapor deposition (PVD) techniques and equipment that are in common use in the high-volume production of coatings that find application in the optical, display, decorative and tribological.
- SIMULATION COMPARISON AND STEPS TO DO SIMULATION BY AUTOLISP (AUTOCAD) AND PRO-E FOR GEAR PAIR. (132.84 KB) This paper gives the basic idea of steps required for doing simulation in AutoCAD with the help of AutoLisp and Pro-Engineering.
- Simulation of a Steel Wire Straightening Taking into Account Nonlinear Hardening of Material (704.15 KB) The physical model of alternating wire bending in a straightener has been considered in the paper.
- Simulation of Fluid Flow and Heat Transfer in the Inclined Enclosure (348.23 KB) The Prandtl number is set to 6 and the effects of cavity inclination on the flow and heat transfer are studied for different Richardson number.
- SIMULATION OF THE EFFECT OF DIE RADIUS ON DEEP DRAWING PROCESS (353.48 KB) The objective of this study is to determine the factors influencing a drawing process and analyzing the process by varying the Die radius and keeping the Friction, Punch radius and Blank Thickness as constant.
- SIMULATION OF VEHICULAR FRONTAL CRASH-TEST (907.62 KB) The objective of this work is to simulate a frontal impact crash of an automobile and validate the results. The aim is also to alter some of the materials of the components with a view to reduce the forces experienced during the crash.
- SINGULARITY ANALYSIS OF A 3-PRRR KINEMATICALLY REDUNDANT PLANAR PARALLEL MANIPULATOR (129.47 KB) Finding Singular configurations (singularities) is one of the mandatory steps during the design and control of mechanisms.
- SMED/QCO TOOL TO IMPROVE PRODUCTIVITY AT SCREWING STATION OF HFR ASSEMBLY (291.86 KB) The objective of the present study is to implement the SMED/QCO tool approach in RBIN, BanP, HFR production line at screwing station to reduce the changeover time by 90% and improve availability by >42%.
- Specific peculiarities of the jets penetrating the liquid pool under severe accidents at the NPP conditions (1072.75 KB) The paper is devoted to one of the problems of the modelling and simulation of the severe accidents at the nuclear power plants (NPP) in touch with development and operation of the passive protection systems against severe accidents.
- Stability Analysis for Neo-Hookean Machine-Tools Foundations (985.93 KB) In this paper we propose a simple system with two degrees of freedom based on a non-linear elastic element and the hypothesis for the coefficients of the elastic force.
- Stability of Homogeneous Smart Beams Based on the First Order Shear Deformation Theory (422.94 KB) This paper studies stability of homogeneous beams with piezoelectric layers subjected to axial load that is simply supported at both ends lies on a continuous elastic foundation.
- Stabilization and Control of a UAV Flight Attitude Angles using the Backstepping Method (474.44 KB) The paper presents the design of a mini-UAV attitude controller using the backstepping method.
- State of Art: Thermal Spraying and Performance of Hard Coatings: A Review (333.62 KB) In the present manuscript the role of wear, corrosion and effect of hard coatings with focus to enhance desirable properties of various engineering materials used for different applications in various industries have been reviewed.
- STATIC ANALYSIS OF LEAF SPRING (200.13 KB) The present work attempts to analyze the safe load of the leaf spring, which will indicate the speed at which a comfortable speed and safe drive is possible.
- STATISTICAL METHODS TO ESTIMATE NATURAL FREQUENCY OF AIR CONDITIONER PIPING (526.16 KB) In the present study, statistical methods are used to estimate fundamental natural frequency of a pipe by selecting different geometrical parameters.
- Statistical Process Design for Hybrid Layered Manufacturing (115.85 KB) Statistical design of experiments using orthogonal arrays and signal-to-noise (S/N) ratios are performed to constitute the core of the robust design procedure.
- STRENGTHENING MECHANISMS AND FRACTURE BEHAVIOR OF 7072Al/Al2O3 (462.7 KB) The use of gravity die casting process has been studied to fabricate 7072/Al2O3 metal matrix composites.
- STRESS ANALYSIS BURST PRESSURE DETERMINATION OF COMPOUND PRESSURE VESSEL (108.23 KB) This paper introduces the stress analysis and the burst pressure calculation of a two-layer shrink fitted pressure vessel.
- STRESS ANALYSIS OF COMPOSITE PROPELLER BY USING FINITE ELEMENT ANALYSIS (503.36 KB) Present work proposes a methodology to design a propeller with a metal and composite material to analyze its strength and deformation using Ansys software.
- STRESS ANALYSIS OF COMPRESSED AIR VEHICLE CHASSIS BY FEM (452.39 KB) In this paper the finite element method has been implemented to modify the existing chassis of compressed air vehicle which ultimately resulted in reduction of weight and equalization of stresses.
- Structural Analysis and Optimization A Must in Spacecraft Projects (288.13 KB) An efficient weight reduction and improved stiffness requirements of a practical spacecraft Trainsat-1 satellite are presented, utilizing abound high efficient method used in MSC.
- Structural Synthesis of 6 Bar Mechanisms as Mechanically Constrained 3R Chains (690.44 KB) In this paper, we consider the planar robot formed by 3R chain. To mechanically constrain the relative movement of the joints so that the end-effector reaches a specified set of task positions, two additional links are added to the 3R chain.
- Structure Design for TUUSAT-1A Microsatellite (1664.09 KB) The satellite is a cube with an edge of 28 cm. The surface of the satellite is covered by six aluminum plates, each of which has a solar chip attached to it.
- STUDY OF EFFECT OF SOLID CONTAMINANTS IN THE LUBRICANT ON BALL BEARINGS (332.13 KB) The present work investigates the effect of lubricant contamination by solid particles on the dynamic behavior of rolling bearings, in order to determine the trends in the amounts of vibration affected by contamination in the Grease.
- Study of In-Situ Dynamic Balancing of Spindle- Chuck Assembly of CNC Lathe (1200.94 KB) The level and performance of CNC machine tool are decided and evaluated by a technology level of motorized spindle and its performance.
- STUDY OF MECHANICAL PROPERTIES OF WOOD POLYACRYLONITRILE COMPOSITES (123.79 KB) The properties ofWPCs over untreated woods were evaluated in terms of compressive test ,hardness of wood were improved with impregnation of polyacrylonitrile
- STUDY OF RHEOLOGICAL AND MECHANICAL PROPERTIES OF BIODEGRADABLE POLYLACTIDE (309.43 KB) In this study, blends of biodegradable Poly (lactic acid) (PLA) and Polycaprolactone (PCL), were prepared using Hakee Rheomix and characterized for rheological and mechanical properties.
- Study of the lubrication oil consumption prediction of linear motion guide-the grey theory & neural network (764 KB) Through this study we can understand the differences in prediction of lubrication oil consumption between neural network and grey theory.
- Study of workpiece thermal profile in Electrical Discharge Machining (EDM) process (1345.19 KB) In this paper, the mathematical relationships between input and output parameters of EDM are established using regression method and the best set of models is chosen.
- STUDY ON HYDROXYAPATITE COATING ON BIOMATERIALS BY PLASMA SPRAY METHOD (935.21 KB) In this paper,using XRD analysis it was confirmed that the phase purity of HAP is maintained even after the coating.
- Study the Effects of Centrifugal Force on Abrasive Flow Machining Process (415.13 KB) This paper discusses centrifugal force as a technique for productivity enhancement in terms of surface roughness (Ra).
- Studying modeling method for using NDT to determine fracture toughness of laminated carbon/ epoxy composite (86.82 KB) In this study, relationship between vibration damping and fracture toughness in polymeric composite laminated was simulated for Vibration damping test using NDT to determine fracture toughness of composites without any damage of sample.
- Supersonic and Hypersonic Flows on 2D Unstructured ContextContext: Part IV Other Turbulence Models (1722.16 KB) In this work, the fourth of this study, numerical simulations involving supersonic and hypersonic flows on an unstructured context are analyzed.
- Surface Error Compensation in HSM of Thin Wall Structures (695.1 KB) The main objective of thisworkis to compensate the surface errorwhichisinduced in machining of thin-walled components.
- SURFACE HARDNESS BEHAVIOUR OF HEAT TREATED Ni-Cr-Mo ALLOYS (85.38 KB) In this research, Ni-Cr-Mo alloys have been chosen for this purpose of investigate the characteristics of hardness and tensile strength of the low carbon alloy steel specimen.
- Surface Roughness Optimization Of Machining Parameters In Machining Of Composite Materials (118.22 KB) The investigation of influence of cutting conditions in turning of Duplex Stainless Steel 2205 is made in this project. The experimental design was formed based on Taguchi’s technique.
- Surface Roughness Prediction in Deep Drilling by Fuzzy Expert System (118.22 KB) This work presents an experimental and an analysis of the performance of carbide drill geometry in drilling of GG25 gray cast iron.
- SYMMETRIC AND ASYMMETRIC WEIGHTS ON GAIT PARAMETERS & LATERAL SPINAL FLEXION (233.82 KB) This paper attempts to document the variations in step length, step frequency and spinal lateral flexion for persons carrying a load (e.g. grocery bags) in one or both arms against those for no load condition over one gait cycle.
- Taguchi Analysis on Cutting Forces and Temperature in Turning Titanium Ti-6Al-4V (273.2 KB) The present work is focused on investigating the effect of process parameters on machinability performance characteristics and there by optimization of the turning of Titanium (Grade 5) based on Taguchi method.
- Tensile Behavior of the Cracked Aluminum Plates Repaired with FML Composite Patches (406.07 KB) In this study, experimental investigations were done on the effect of repairing the center-cracked aluminum plates using the FML patches.
- TESTING OF RIGID CELLULAR THERMAL INSULATION AS PER INDIAN STANDARDS (566.79 KB) In the present study, various tests were performed on Rigid cellular insulation (Thermocol) as per IS 11239 to determine the temperature at which the insulation get distorted as well as to study its characteristics.
- The Design of Light Jet Aircraft (928.39 KB) This paper discusses the design of light jet aircraft (LJA) in the university level. The design process that covers by this paper is just from conceptual approach.
- THE EFFECT OF PROCESS PARAMETERS ON MRR IN TURNING OF PURE TITANIUM (63.28 KB) This paper investigates the effect of process parameters in turning of Titanium grade 2 on conventional lathe.
- THE EFFECT OF R-RATIO AND INITIAL ANGLE OF CRACK ON FATIGUE PARAMETERS (210.44 KB) This study considers the numerical and experimental fatigue crack growth under mixed mode I-III in a holed plate with edge crack which made of aluminum alloy 7017 under simple tensile-tension loading.
- The effect of transverse shear on the face sheets failure modes of sandwich beams loaded in three points bending (226.62 KB) In this paper , The effect of the transverse shear on the face yielding and face wrinkling failure modes of sandwich beams loaded in three points bending have been studied
- THE EMPHASIS OF PHASE TRANSFORMATIONS AND ALLOYING CONSTITUENTS (429.49 KB) The propensity for hot cracking is determined primarily by the hot cracking susceptibility factor
- The Future of HVAC (232.93 KB)
- The Gas-assisted Expelled Fluid Flow in the Front of a Long Bubble in a Channel (1241.98 KB) Investigated in this study is the steady-state flow field of a long bubble penetrating into a region filled with a viscous fluid confined by two closely located parallel plates.
- THE INFLUENCE OF VIBRATION ON THE MILL PERFORMANCE SYSTEM IN KOSOVO B (262.72 KB) In this project , briefly the work of thermo central in Kosovo B is presented especially the work of coal mill.
- The Link Between Automation KPIs and Enterprise KPIs (396.5 KB) In this Paper, the studies that demonstrate how improved control system KPIs directly drive improved corporate KPIs, and how managing these factors can ensure better performance of the long-term measures.
- The Performance and NOX Emissions of a IDI diesel Engine Fuelled With JB100, JB80, JB60, & Diesel. (140.03 KB) The aim of the present work is to investigate the influence of exhaust gas recirculation (EGR) rates on Jatropha biodiesel (JB), diesel and their blends.
- THE STRESS IMPACT ON MECHANICAL PROPERTIES OF ROCKS IN HYDRO FRACTURING TECHNIQUE (370.33 KB) The innovative technology of ‘hydro fracturing’ is a new interdisciplinary approach of Hydro mechanical to stimulate the bore well to improve the yield by applying water pressure into bore well by using a heavy duty mechanical compressor.
- Theoretical Studies on Magnetorheological Fluid Brake (408.84 KB) In this paper, the design method of the cylindrical MR fluid brake is investigated theoretically.
- THEORY OF HIGH RATE OF FIRE AUTOMATIC WEAPON WITH BOUND BARRELS , BREECHES (843.56 KB) The paper decribes principle of the weapon with together bound of barrels and breeches. Then the kinematics and dynamics of the weapon mechanism with the crank mechanism inserted between the breech block and breech block carrier is discussed.
- Thermal Environment and Heat Stress Monitors (571.03 KB)
- Thermochemical Non-Equilibrium Entry Flows in Mars in Two- Dimensions – Part I (1670.48 KB) This work, first part of this study, describes a numerical tool to perform thermochemical nonequilibrium simulations of reactive flow in two-dimensions.
- Thermoelastic Waves in Anisotropic Plates using Normal Mode Expansion Method (326.43 KB) Analysis for the generalized thermoelastic Lamb waves, which propagates in anisotropic thin plates in generalized thermoelasticity, is presented employing normal mode expansion method.
- Thermoelectric Air Cooling For Cars (329.95 KB) Thermoelectric Air cooling for car prototype was designed and built which can be used for personal cooling insie the car .
- THERMOHYDRODYNAMIC PERFORMANCE OF JOURNAL BEARING WITH 3D-SURFACE ROUGHNESS (230.43 KB) This theoretical work describe the combined influence of surface roughness, thermal and fluid-inertia effects on performance characteristics of hydrodynamic journal bearing.
- Three Dimensional Modeling of Mixture Formation and Combustion in a Direct Injection Diesel Engine (1050.49 KB) The paper provides an overview of the submodels implemented, which account for liquid spray atomization, droplet secondary break-up, droplet collision, impingement, turbulent dispersion and evaporation.
- Three-Dimensional Two-Impulsive Orbital Maneuvers with Time Limit (832.96 KB) The problem of three-dimensional two-impulsive orbital maneuvers between two elliptical orbits with minimum fuel consumption, but having a time limit, is considered in the present paper.
- TITLE -SUPPLIER SELECTION: FUZZY-AHP APPROACH (67.32 KB) The primary objective of the paper is to identify the performance measurement indicator for best supplier andsecondly to develop an appropriate Fuzzy-AHP model for evaluating the suppliers.
- TO STUDY PERFORMANCE OF TWO STROKE ENGINE WITH MODIFIED INTAKE SYSTEM (289.05 KB) The objective of the project is to determine how much power improvement with the modification in intake system in compared to the original intake system.
- Towards Automated Visual Inspection and Classification of Micro-Parts (928.41 KB) This paper presents a concept of an automated visual inspection and classification methods for micro-parts.
- Transient Analysis of Disk Brake By using Ansys Software (551.29 KB) In this paper the thermo elastic phenomenon occurring in the disk brakes, the occupied heat conduction and elastic equations are solved with contact problems
- TRANSMITTED POWER AND ENERGY FLOW BEHAVIOR OF DEGRADING WET FRICTION CLUTCHES (1513.88 KB) Experiments performed in the framework of accelerated-life tests of wet friction clutches reveal that with the progression of degradation of clutches, the transmitted power decreases together with a change in the energy flow behavior.
- Turbulent Flame Velocity Model for SI Engine (346.72 KB) A new model for turbulent flame velocity of premixed flame in spark ignition engine for Iso-octane air mixture has been developed and validated for a wide range of engine operating parameters.
- TVD Flux Vector Splitting Algorithms Applied to the Solution of the Euler and Navier-Stokes Equations (1496.39 KB) In the present work, the Steger and Warming, the Van Leer, the Liou and Steffen Jr. and the Radespiel and Kroll schemes are implemented, on a finite volume context and using a structured spatial discretization.
- TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW (426.47 KB) In this paper heat transfer and fluid flow characteristics in a channel has been theoretically investigated.
- TWO-PHASE CONDENSATION HEAT TRANSFER COEFFICIENTS AND PRESSURE DROPS OF R-404A (954.14 KB) In this paper, the two phase heat transfer coefficients and pressure drops of R-404A which performed for different condensing temperatures, with superheating and sub cooling and using hermetically sealed compressor.
- Ultrasonic Linear Motor Using Surface Acoustic Waves (735.3 KB) The first success in the operation of an ultrasonic linear motor at HF band driving frequency using the Rayleigh wave is described. The substrate material is a 127.8 Y-cut LiNbO3 wafer whose diameter is three inches
- UNSTEADY LAMINAR CONVECTION FLOW OVER PERIODIC GROOVES BY USING SIO2-WATER (338.47 KB) The results revealed 124% heat transfer enhancement compared to the water in a grooved channel by using SiO2 nanoparticle with volume fraction and nanoparticle diameter of 4% and 20nm respectively.
- USE OF FUSED DEPOSITION MODELING PROCESS IN INVESTMENT PRECISION CASTING (351.35 KB) The present study assessed the suitability of the fused deposition modeling (FDM) process for creating sacrificial IC patterns by studying FDM fabricated part thermal response at various temperatures.
- Use of Phased Array Ultrasonic Testing For Sizing of Hydrogen Blisters In LPG Wash Water Vessel (581.54 KB) This paper describes the use of phased array UT (PAUT) technique for detection of lamination and sizing of hydrogen blisters in the LPG wash water vessel.
- VEGETABLE OIL AS FUEL IN C.I. ENGINE: PROBLEMS AND POSIBLE SOLUTIONS (39.29 KB) Filter plugging can be minimized if crude degummed oils are passed through a four-micrometer in the paper author has suggested various ways to overcome the difficulties associated with vegetable oil to be used in CI engine.
- VIBRATION ANALYSIS OF TIE-ROD/TIE-BOLT ROTORS USING FEM (306 KB) Tie-rod and Tie-bolt rotors have different applications in industries. Vibration analysis of this type of rotors would be useful for condition monitoring and fault diagnosis purposes.
- Vibration characteristics of nanocomposite plates under thermal conditions including nonlinear effects (228.14 KB) Thermo-mechanical dynamic characteristics of SWCNT-Reinforced Composite Plates are studied in this paper.
- Vibration response of sandwich plate under Low-velocity impact loading (813.15 KB) The vibrations on the sandwich plate under the impact are evaluated using the Wigner-Ville distribution.
- VIBRATION STUDY OF MAGNETORHEOLOGICAL FLUID FILLED SANDWICH BEAMS (447.22 KB) This study investigates the vibration controllability of MR fluid filled cantilever beams under externally applied magnetic fields.
- VIBRATION SUPPRESSION USING MECHATRONIC SYSTEMS (67.17 KB) This paper attempts to summarize various methods that are being developed for vibration detection and suppression.
- VIBRATIONAL ANALYSIS OF QUARTER CAR VEHICLE DYNAMIC SYSTEM (178.41 KB) In this paper the stationary response of quarter car vehicle model moving with a constant velocity over a rough road is considered for the performance study.
- Waste Oxidising Boilers (297.89 KB)
- White Paper on Approaches to Safety Engineering (99.2 KB) This white paper lays out some foundational information about different approaches to safety: how various industries differ in their approaches to safety engineering
- Wind Tunnel Model - Fabrication Challenges (219.86 KB) Fabrication of different components of such a wind tunnel model and complexities associated with it has been presented in this paper.
- How to size servo motors: Advanced inertia calculations This paper explains the parallel axis theorem.
- Optimizing Strategy for Boiler Drum Level Control This paper explains about the boiler drum level control.
- Top 10 Machine Vision Improvement Opportunities This article discussess on the top 10 areas to improve vision system efficiency.
- Active Feedback Control This paper explains about the active feedback control systems.
- Active Feedback Control and Shunt damping This paper explains about the active feedback control systems and shunt damping in detail.
- Analysis of cold rolling – a more accurate method This paper explains about the cold rolling method.
- Analysis of extrusion This paper explains about the analysis of extrusion in detail.
- Analysis of forming- Slab Method This paper explains about the analysis of forming materials using slab method.
- Analysis of forming- Slipline Field Method This paper explains about the analysis of forming materials using upper bound analysis.
- Analysis of forming –Upper bound Analysis This paper explains about the analysis of forming materials using upper bound analysis.
- Arc welding processes (SMAW) This paper explains about the basic principle of arc welding processes with focus on shielded metal arc welding.
- Aspects of wire drawing and tube drawing This paper explains about the aspects of wire and tube drawings in detail.
- Bar, Wire and tube drawing This paper explains about the bar,wire and tube drawing in detail.
- Basic principle and methodology of weld joints design This paper explains about the basic principle and methodology of weld joints design for static and dynamic loading.
- Principles of Active Vibration Control: Basics of active vibration control methods This paper explains about the basics of active vibration control methods in detail.
- Basics of Vibration This paper explains about the concepts, definitions and terminology of vibration.
- Basics of Vibrations for Simple Mechanical Systems This paper explains about the fundamentals of Sound and Vibrations.
- Brake Mean Effective Pressure This paper explains about the brake mean effective pressure.
- Brazing, soldering and Friction Stir Welding This paper explains about the basic concept of brazing and soldering processes and fabrications conditions.
- Brief overview of design and manufacturing This paper explains about the design and various manufacturing process.
- Causes of common problems encountered during welding of aluminium This paper explains about the influence of hydrogen in weld joints on the soundness and performance of weld joints.
- Characteristics affecting each stage of fatigue fracture This paper explains about the fatigue of metals, stages in fatigue fracture and material characteristics.
- Common noise and vibration resources This paper explains about the common noise and vibration resources in detail.
- Compound stresses in machine parts This paper explains about the compound stresses in detail.
- Mechanical behavior of crystalline materials- Comprehensive Behaviour This paper explains about the material behavior during compression and shear.
- Contemporary Crankshaft Design This paper explains about the crankshaft design.
- Converting Fuel into Horsepower This paper explains about the converting fuel in to horsepower.
- Cotter and knuckle joint This paper explains about the cotter and knuckle joints used in machinery.
- Vibration Generations Mechanisms: Damping- Models and Measures This paper explains about the damping models and measures in detail.
- Vibration Measurement Techniques: Data Acquisition This paper explains about the introduction of data acquisition.
- Design Consideration in Material Selection: Design Sensitivity This paper explains about the two specific approaches in design sensitivity.
- Design Consideration in Material Selection: Design for enhanced material damping This paper explains about the three types of material in detail.
- Design Consideration in Material Selection: Design Specifications This paper explains about the design specification in detail.
- Design Consideration in Material Selection: Damping based This paper explains about the damping based design consideration in material selection.
- Design for dynamic loading This paper explains about the concept of variable stresses, endurance limit, low cycle fatigue and high cycle fatigue with finite and infinite life.
- Design for static loading This paper deals with different theories of failure.
- Principles of Passive Vibration Control: Design of absorber This paper explains about the design of absorber in detail.
- Design of Adhesive Joints This paper explains about the design of adhesive joints in detail.
- Design of Band and Disc Brakes This paper explains about the design of band and disc brakes in detail.
- Design of bolted joints This paper explains about the screw fastenings due to initial tightening load and external load.
- Design of Eccentrically Loaded Bolted/Riveted Joints This paper explains about the design of eccentrically loaded bolted joints.
- Design of Eccentrically Loaded Welded Joints This paper explains about the design of eccentrically loaded welded joints.
- Design of Flat Belt drives This paper explains about the design of flat belt drives in detail.
- Design of Helical Springs for Variable Load This paper explains about the design of helical springs for variable load in detail.
- Design of Joints with Variable Loading This paper explains about the design of joints with variable loading.
- Design of Leaf Springs This paper explains about the design of leaf springs in detail.
- Design of power screws This paper explains about the stresses developed in a power screw.
- Design of Riveted Joints This paper explains about the design of riveted joints in detail.
- Design of shaft for variable load and based on stiffness This paper explains about the design of shaft for variable load and based on stiffness.
- Design of shoe brakes This paper explains about the design of shoe brakes in detail.
- Design of V- Belt drives This paper explains about the design of V-belt drives in detail.
- Design of Welded Joints This paper explains about the design of welded joints in detail.
- Design philosophy This paper explains about the concept of machine design and their types.
- Design principles for thick cylinders This paper explains about the design principles for thick cylinders.
- Design procedures for rigid and flexible rubber-bushed couplings This paper explains about the design procedure of a rigid flange coupling.
- Destructive testing methods of welded joints This paper explains about the basic approach of proceedings with failure analysis.
- Different forces acting in a typical welding arc zone This paper explains about the different forces acting in a typical welding arc zone and their effect on welding.
- Dynamic characteristics of welding power sources This paper explains about the dynamic characteristics of welding power sources.
- Effects of various service load This paper explains about the residual fatigue life concept.
- Elasticity This paper explains about the elasticity in detail.
- Principles of Active Vibration Control: Electro-magnetic This paper explains about the introduction of electro magnetic.
- Electronic Engine Controls This paper explains about the electronic engine controls.
- Principles of Active Vibration Control: Electrorheological fluids This paper explains about the electorheological fluids in detail.
- Engine Metals This paper explains about the various engine metals.
- Engineering Materials This paper deals with types and uses of some common non-ferrous metals and non-metals.
- Factors affecting the selection of suitable groove geometry This paper explains about the influence of welding parameters on weld bead geometry.
- Factors to be considered for selecting a suitable type of welding current and polarity This paper explains about the factors to be considered for selection of suitable type of welding current and polarity.
- Failure Analysis and Prevention: Fundamental causes of failure This paper explains about the the conditions for failure of mechanical components.
- Fatigue performance of weld joints This paper explains about the various approaches commonly used for enhancing the fatigue performance
- Vibration Generations Mechanisms : Field Balancing of Rigid/Flexible rotors This paper explains about the mechanisms of field balancing of rigid/flexible rotors.
- Vibration Generations Mechanisms: Flow Induced This paper explains about the mechanisms of flow induced.
- Fluid Film bearings This paper explains about the fluid film bearings in detail.
- Force, Pressure and Friction This paper explains about the force,pressure and friction.
- Forging die design and Forging defects This paper explains about the forging die design aspects and forging defects.
- Forging Equipment and General analysis of forging This paper explains about the analysis of forging.
- Vibration Measurement Techniques: Fourier Transform This paper explains about the introduction of fourier transform.
- Free and Forced Vibrations of Two Degree of Systems This paper explains about the free and forced vibrations of two degree of systems in detail.
- Fretting Corrosion This paper explains about the characteristics of fretting corrosion.
- Fundamental approach of obtaining the arc efficiency This paper explains about the fundamental approach of obtaining the arc efficiency.
- Fundamental concepts of metal forming technology This paper explains about the definitions and classification of metal forming processes.
- Fundamentals of welding arc This paper explains about the fundamentals of welding arc.
- Further analysis and extrusion defects This paper explains about the extrusion defects in detail.
- General Procedure of Failure Analysis This paper explains about the basic approach of proceedings with failure analysis.
- Grain refinement methods This paper explains about the three grain refinement methods.
- Hot rolling and rolling defects This paper explains about the hot rolling and its defects in detail.
- Hydrodynamic Bearings This paper explains about the hydrodynamic bearings.
- Principles of Passive Vibration Control: Absorber with ideal spring This paper explains about the absorber with ideal spring in detail.
- Influence of hydrogen in weld joints This paper explains about the influence of hydrogen in weld joints on the soundness
- Influence of various welding This paper explains about the the concept of hot wire TIG welding process.
- Introduction and classification of forging processes This paper explains about the classification of forging in detail.
- Introduction to Belt drives This paper explains about the introduction to belt drives in detail.
- Introduction to Damping in Free and Forced Vibrations This paper explains about the effect of damping in two conditions.
- Introduction to Design of Helical Springs This paper explains about the introduction to design of helical springs.
- Introduction, types and uses of couplings This paper explains about the shaft couplings types and their uses.
- Principles of Passive Vibration Control: Isolators with stiffness and damping This paper explains about the isolaters with stiffness and damping in detail.
- Joining This paper deals with fundamental approaches used in manufacturing.
- Low and high cycle fatigue This paper explains about the simplified equations for designing components subjected to both low cycle and high cycle fatigue with finite life.
- Principles of Active Vibration Control: Magneto- and Electrostrictive Materials in Vibration Control This paper explains about the magneto- and electrostrictive materials in vibration control in detail.
- Principles of Active Vibration Control: Magneto-rheological fluids This paper explains about the modes of operations in magneto-rheological fluids.
- Material behaviour in metal forming This paper explains about the material behaviour in metal forming in detail.
- Materials and their structures This paper explains about the crystaline materials and their structures.
- Metal Fatigue This paper explains about the metal fatigue.
- Metal Inert Gas Welding This paper explains about the metal inert gas welding in detail.
- Method of calculating the cooling rate This paper explains about the method of calculating the cooling rate in HAZ.
- Methods of initiating and maintenance of the Welding arc This paper explains about the methods of initiating and maintenance of the welding arc.
- Multi Degree of Freedom Systems This paper explains about the multi degree of freedom systems in detail.
- Principles of Active Vibration Control: Piezoelectric Accelerometers This paper explains about the piezoelectric accelerometers in detail.
- Principles of Active Vibration Control: Piezoelectric materials This paper explains about the piezoelectric material in detail.
- Piston Motion Basics This paper explains about the basics of piston motion.
- Plasticity This paper explains about the plasticity in detail.
- Power density and welding process This paper explains about the effects of power density and welding process.
- Power Screw drives and their efficiency This paper explains about the power screw drive in machinery.
- Properties of Belt Drives This paper explains about the basics and properties of belt drives.
- Residual stresses in weld joints This paper explains about the mechanisms of development residual stress in weld joints.
- Riveted Joints : Types and Uses This paper explains about the various types and uses of riveted joints.
- Rolling - Introductory concepts This paper explains about the rolling in detail.
- Rolling contact bearings This paper explains about the rolling contact bearings in detail.
- Vibration Generations Mechanisms: Self Excited Vibration This paper explains about the mechanisms of self-excitation.
- Shaft and its design based on strength This paper explains about the shaft and its design based on strength in detail.
- Principles of Active Vibration Control: Shape Memory Alloy This paper explains about the introduction of shape memory alloy.
- Principles of Passive Vibration Control: Shock Absorber This paper explains about the shock absorber in detail.
- Simple stresses This paper explains about the simple stresses in machine elements; tensile, compressive, bearing and shear stresses.
- Solidification Mechanisms This paper explains about the common solidification mechanisms.
- Vibration Generations Mechanisms: Source Classification This paper explains about the source classification in vibration generation mechanism in detail.
- Strain analysis This paper explains about the strain analysis in detail.
- Strain Transformation equations This paper explains about the general strain transformation equations.
- Stress and Strain This paper explains about the various stress and strain.
- Stress Concentration This paper explains about the stress concentration for different geometric configurations.
- Stress transformation and Mohr’s circle for stresses This paper explains about the general states of stress.
- Mechanical behavior of crystalline materials - Stress Types and Tensile Behaviour This paper explains about the behavior of engineering materials under uniaxial tensile loading.
- Submerged Arc Welding This paper explains about the principle of submerged arc welding process.
- The Concept Of Weldability Of Metals This paper explains about the concept and factors affecting the weldability of metals.
- The Definitive V8's This paper explains about the definitive V8's.
- The fundamentals of weld joint design This paper explains about the fundamentals of weld joint design in detail.
- The Influence Of Process Parameters & Plasma Arc Welding This paper explains about the influence of process parameters and plasma arc in detail.
- The Need For Protecting The Weld And Rationale This paper explains about the gas and slag metal reactions.
- The need of inspection and testing of welded joints This paper explains about the need of inspection and testing of welded joints.
- The need of welding power source This paper explains about the needs of welding power source and their classification.
- The principle Of Tungsten Inert Gas (TIG) Welding Process This paper explains about the principle of tungsten inert gas (TIG) welding process.
- Thick cylinders- Stresses due to internal and external pressures This paper explains about the thick cylinders in detail.
- Thin Cylinders This paper explains about the thin cylinders in detail.
- Threaded Fasteners This paper explains about the various types of bolts, set screws and studs.
- Torsional Vibration Overview This paper explains about the overview of torsional vibration.
- Transmissibility This paper explains about the transmissibility.
- Turbochargers This paper explains about the basics of turbochargers.
- Types of extrusion and extrusion equipment This paper explains about the various types of extrusion and its equipments.
- Types of fasteners: Pins and keys This paper explains about the types detachable of fasteners.
- Types Of Tungsten Electrodes This paper explains about the different types of tungsten electrodes used in TIG welding process.
- Types of welding position This paper explains about the various types of welding position.
- Velocity and Acceleration This paper explains about the velocity and acceleration.
- Vibration Measurement Techniques: Basics This paper explains about the basics of vibration measurement techniques.
- Vibration Measurement Techniques: Filters This paper explains about the filters in detail.
- Volumetric Efficiency and Engine Airflow This paper explains about the volumetric efficiency and engine airflow.
- Weld Thermal Cycle This paper explains about the concept of weld thermal cycle.
- Welded Joints: Types and Uses This paper explains about the various types and uses of welded joints.
- Welding And Allied Welding Processes This paper explains about the various welding processes.
- Welding processes Classification based on the technological criteria This paper explains about the classification of welding processes on the basis of technical factors
- Wire and bar drawing - Basic concepts This paper explains about the basic concepts of wire and bar drawing.
- 4A H-bridge motor driver using the L298 IC Schematic This article explains about the Schematic of 4A H-bridge motor driver using the L298 IC.
- Analysis of Axi-symmetric forging of a disk This paper breifs the Axi-symmetric forging of a disc-analysis.
- Analysis of plane strain upset forging of rectangular billet This article describes the different methods of analysis of bulk deformation processing, like slab analysis, slip line field line, upper bound analysis, FEM analysis.
- Analysis of stresses This article breifs the analysis of stresses.
- Analysis of strains This article describes the analysis of strains.
- Applications of Hydrostatics This paper explains about the applications of hydrostatics.
- Architecture of Industrial Automation Systems This article describe the various elements of an Industrial Automation Systems and how they are organized hierarchically in levels and nature of information processing in these levels and the information flow among them.
- Belt Conveyor Take Up Design, Conveyor Belt Take Up System, Horizontal Take Up In Belt Conveyor This paper explains about the belt conveyors requirement to use some form of take up device.
- Biodiesel, Transesterification Reaction, Biodiesel Materials, Biodiesel Feedstock’s Biodiesel Blends This paper explains about the biodiesel is a fuel made from vegetable oils and alcohols utilizing a chemical process.
- Build a 5A H-bridge Motor driver! New version This article explains about the configuration to Build a 5A H-bridge Motor driver! New version.
- Build a 5A H-bridge Motor driver! Old version This paper breifs about the configuration to Build a 5A H-bridge Motor driver! Old version.
- Car of the Future - Hybrid Car This article breifly explains about the hybrid cars which are one of the hottest things going these days.
- Casting Inspection, Non Destructive Testing, Destructive Testing This paper explains about the various inspection of casting.
- Closed Loop Speed and Position Control of DC motors This article describes the Closed Loop Speed and Position Control of DC motors.
- CNC Machines: Interpolation, Control and Drive This article describes a major features of an interpolator for a contouring CNC system.
- Illumination Systems - Color This article explains the three basic elements in color perception are source of illumination, object illuminated and detector that recognizes color by the reflected light from the object.
- Comparison of Euler Theory with Experiment results This article discusses the Comparison of Euler Theory with Experiment results.
- Conservation of Mass using Control Volumes This paper explains about the conservation of mass using control volumes.
- Conservation of Momentum using Control Volumes This paper explains about the conservation of momentum using control volumes.
- Contour Crafting, Houses Of The Future, Houses Built By Robot This paper explains about the process and ingredients used in contour crafting.
- Control Valves This article explains the basic principle of operation of a pneumatically actuated control valve and constructions and relative advantages and disadvantages of single- seated and double-seated valves.
- Control Volume (Integral) Technique This paper explains about the techniques for solving flow problems.
- Controller Tuning This article discusses the importance of tuning of controller for a particular process and three methods for tuning of P, I and D parameters.
- Deflection of Beams This article breifs on Deflection of Beams.
- Derivation of the Navier-Stokes Equation This paper explains about the viscous forces for incompressible newtonian fluids.
- Descriptions of Fluid Flows This paper explains about the methods of visualizing fluid flows.
- Dimensional Analysis and Similarity This paper explains about the purposes and usefulness of dimensional analysis.
- Dimensions and Units in Fluid Mechanics This paper explains about the dimensions and units in fluid mechanics.
- Directional Control Valves, Switches and Gauges This article breifs about the major types of direction control valves, their construction, operation and symbol and pressure switches, as well as pressure and flow gauges used in hydraulic systems.
- Displacement and Speed Measurement This article explains about the three methods of displacement measurement using passive electrical sensors and he principles of operation of inductive and capacitive types of proximity sensors.
- Durability Analysis, Application Of Durability Analysis In Automotive, Aerospace & Wind Turbines This paper explains about the application Of durability analysis In automotive, aerospace & Wind turbines.
- Elastic Stability Of Columns This paper explains the Elastic Stability Of Columns.
- Electrical Actuators: BLDC Motor Drives This article describes the principle of operation of a PM BLDC motor and Closed Loop Control of a BLDC Drive.
- Electrical Actuators: DC Motor Drives This article explains the the principle of torque generation and block diagram of a typical speed control loop for a separately excited dc motor.
- Electrical Actuators: Induction Motor Drives This article describes about Equivalent circuit of induction motor and characteristics of Torque-speed.
- Energy Methods This article describes the Energy Methods.
- Energy Savings with Variable Speed Drives This article describes a typical methods of flow control by industrial fans and pumps and demonstrates energy saving with variable speed drive method of flow control compared to throttling.
- Engine Speed Governors, Speed Control Governor, Speed Limiters This paper explains about the various types and the purpose of engine speed governor.
- Measurement Systems - Errors and Calibration This article explains about the different types of errors and estimate the least square straight line from a set of dispersed data.
- Factor of Safety, FOS This paper explains about the design margin over the theoretical design capacity to allow for uncertainty in the design process.
- Fluid Properties (three types) This paper explains about the three properties of fluid properties.
- Fluids in Rigid Body Motion This paper explains about the two cases of rigid body motion.
- Formal Modelling of Sequence Control Specifications and Structured RLL Programming This article describes motivations for formal modelling in the design of sequence control programs for an industrial control problem and the major steps in the design of a sequence control program for an industrial control problem.
- Illumination Systems - Glare This article breifly explains about the types of Glare and various Glare Indices, including the measures to reduce the Glare.
- Graphical Solution – Mohr's Stress Circle This paper explains the Graohical Solution using Mohr's Circle.
- Higher Levels of Automation Systems This article explains the major functions of Production Management Systems under Level 3 Automation and features of a Distributed Control System (DCS).
- Hydraulic Actuation Systems - I: Principle and Components This article describes the principles of operation of hydraulic systems and understand its advantages and the graphical symbols used to depict typical hydraulic system components.
- Illumination Engineering Basics -Introduction This article affords the concepts of high voltages for transmission and standard voltage levels.
- Implementation of P-I-D Controllers This article explains a scheme for implementation of pneumatic P-I controller and advantages of using velocity algorithm over position algorithm.
- Incandescent Lamps This paper describes about the cComponents of an Incandescent Lamp and Factors responsible for Performance of an Incandescent Lamps.
- Industrial Bucket Elevators, Vertical Bucket Conveyors, Bucket Elevator Types This paper explains about the three types of bucket elevators based on the bucket spacing and mode of discharge.
- Industrial Hydraulic Circuits This article discusses about the Interpret hydraulic system symbols and circuit diagrams and techniques for energy saving in hydraulic systems.
- Inrush Current in DC-DC Converters This article describes on Inrush Current in DC-DC Converters.
- Lighting Application - Interior Lighting This article enumerates the maintenance procedures for proper interior lighting and factors responsible for interior lighting.
- Introduction to Computer Numerically Controlled (CNC) Machines This article defines Numerical Control and describe its advantages and disadvantages and major types of motion control strategies.
- Introduction to Hydrostatics This paper explains about the some of the rules in hydrostatics.
- Introduction to Industrial Automation and Control This article defines the automation and Control and explain the differences in the sense of the terms and introduce the concept of a Product Life Cycle and explain how Automation and Control technologies relate to the various phases of the cycle.
- Introduction to Pressure in Fluid Mechanics This paper explains about the pressure terminology.
- Introduction to Process Control This article States and explains the significance of transfer function matrix and Differentiate between manipulating variable and disturbance.
- Introduction to Real Time Embedded Systems This article explains the major hardware components of an Embedded system and typical architectures of Real Time Embedded Systems.
- Introduction to Sequence/Logic Control and Programmable Logic Controllers This article defines Sequence and Logic Control and a Programmable Logic Controller and name its major structural components.
- KERS used in F1 racing This article breifs about Kinetic Energy Recovery System (KERS) which is a very unique and a debated addition to F1 racing.
- Laws of Illumination This article explains the Standard of Illumination, Inverse Square law of Illumination and Lambert’s Cosine Law of Incidence.
- Lighting Applications This article lists requirements of lighting for Educational Institutions, Auditoria, Hospitals, Hotels and restaurants and classifies Industrial Lighting & Office Lighting.
- Lighting Calculations This article lists the factors to be accounted for calculation and room index.
- Magnetic Shielding Design for Manufacturing This article offers the Magnetic Shielding Design for Manufacturing.
- Material Acceleration This paper explains about the material acceleration.
- Material subjected to combined direct and shear stresses: This article describes the Material subjected to combined direct and shear stresses.
- Measurement of Level, Humidity and pH This article mainly discusses about the basic techniques of level and humidity measurement and different methods for level and moisture measurements.
- Measurement Systems Specifications This article defines the different terms used for characterizing the performance of an instrument/ measurement system and the performance specifications of a measurement system from its test data.
- Mechanical Properties This article breifly explains the properties of Mechanical.
- Members Subjected to Axisymmetric Loads This article describes the Members Subjected to Axisymmetric Loads.
- Members Subjected to Combined Loads This article affords the Members Subjected to Combined Loads.
- Members Subjected to Flexural Loads This article breifs about the Members Subjected to Flexural Loads.
- Members Subjected to Torsional Loads This article describes the Members Subjected to Torsional Loads.
- Networking of Field Devices via Fieldbus This article describes the basic computation and communication architecture for Fieldbus device.
- NVH Terms, NVH Terminology, NVH Glossary This paper explains about the various terminology in NVH.
- P-I-D Control This paper defines the error transfer function and compute steady state error and advantages of P-I controller over simple P and I action.
- Photometry This article breifs about the Illumination Meter, Rousseau Diagram and how to understand a Luminaire.
- Pneumatic Control Components This article breifs the principle of operation of a flapper nozzle amplifier and operation of a feedback type valve positioner.
- Pneumatic Control Systems This article explains the element by which the proportional gain of a P-controller can be adjusted and transfer function of a pneumatic P-D controller.
- Power management: Automation enhances power management applications This article breifs the Power management: Automation enhances power management applications.
- Pressure and Force Measurement This paper describes about the different methods for pressure measurement using elastic transducers and gage factor of a strain gage.
- Procedure for drawing shear force and bending moment diagram: This article explains the Procedure for drawing shear force and bending moment diagram.
- Programming of PLCs: Sequential Function Charts This paper describes the major features of the IEC 1131-3 standard for PLC programming and valid and invalid SFC segments.
- Radiation This article breifs about the range of light human eye responds to, lists the physical phenomenon employed in artificial lighting and color temperature.
- Real-Time Operating Systems: Introduction and Process Management This article defines multi-tasking and describe its advantages and the concept of preemptive priority scheduling.
- Lighting Application - Road Lighting This article lists the categories of Road and recommended light levels and Post Top Lanterns.
- Shearing stress distribution in typical cross-sections: This article explains the Shearing stress distribution in typical cross-sections.
- Signal Conditioning Circuits This article Compares the performances of single input amplifiers (inverting and non-inverting) in terms of gain and input impedance and derive the gain expression of a three-op.amp. instrumentation amplifier.
- Simple Bending Theory OR Theory of Flexure for Initially Straight Beams This article explains about the Bending Theory.
- SolidWorks COSMOS Use, SolidWorks COSMOS Analysis, Plastics Application, Elastomer Application, Metal-Forming Applications This paper explains about the use of solidworks cosmos and the applications of plastics,elastomer and metal forming.
- Special Control Structures: Cascade, Override and Split Range Control This article explains about the governing equations for determining the stability of a cascade control system and block diagram representation of cascade control system.
- Special Control Structures: Feedforward and Ratio Control This paper describes the block diagram of a feedforward-feedback controller and two possible arrangements for achieving ratio control.
- Special Control Structures: Predictive Control, Control of Systems with Inverse Response This article explains with an example the difficulty in controlling a process with dead time and also two schemes for predictive control in automatic gage control of a rolling mill.
- Lighting Application - Sports Lighting This article lists the categories of users concerned with sport lighting and factors responsible for sport lighting.
- Step Motors: Principles, Construction and Drives This paper distinguishes between the terms full stepping and half stepping and different modes of operation for continuous rotation.
- Strength of Materials-Introduction and Review This article explains the Strength of Materials.
- Stress - Strain Relations This article breifs the Relationship between stress and strain.
- Tandem Wipers, Windshield Wiper Blades, Electronic Wiper Control This paper explains about the features and benefits of tandem wipers.
- Terms in Engineering Measurements This paper explains about the various terms used in the engineering measurements.
- The Area-Moment / Moment-Area Methods: This article deals with the Moment Area Methods.
- The AUTOCAD Electrical Advantage This article explains about the The Logical Choice for Electrical Controls Design AutoCAD.
- The Energy Equation for Control Volumes This paper explains about the energy equation for control volumes.
- The PLC Hardware Environment This paper states typical components and functionality of the main types of modules and typical Function modules used in PLC systems.
- The Software Environment and Programming of PLCs This article explains the structureand execution of a PLC Program, typical elements of an RLL Diagram.
- Theories of elastic failure This paper describes about the elastic failure theory.
- Thermal stresses, Bars subjected to tension and Compression This article explains the Thermal stresses, Bars subjected to tension and Compression.
- Transverse Horizontal Axis Water Turbine, THAWT, Modern Tidal Energy, Most Efficient Wind Turbine This paper explains about the tidal energy and the transverse horizontal axis water turbine.
- Types Of Finite Element Analysis , Finite Element Analysis Capabilities, Finite Element Analysis Engineering Services This paper explains about the various types of finite element analysis and their capabilities.
- Use of Flexure Formula: This paper describes about the Use of Flexure Formula.
- Vertical Screw Conveyors, Vertical Screw Pump, Vertical Screw Conveyor Design This paper explains about the vertical screw conveyors,pump and its design.
- Vision Gauge Digital Optical Comparator, Optical Comparator Measurement, Digital Optical Comparator Machine This paper explains about the benefits of vision gauge digital optical compartor.
- Acoustic impedance, intensity and power This paper describes the ratio of acoustic pressure to flow. It allows us to calculate acoustic power, intensity and the reflection and transmission at boundaries.
- Black Holes This article explains about a black hole is a point in space with so much gravity that not even light (the fastest thing around) can escape, hence the name. To an observer it would just appear as a sphere of perfect blackness.
- Changes in Solderability with Time This article explains the changes in solderability with time.
- Characteristics of Solder Paste This article describes the charactristics of solder paste like flow, slump, rheology, tackieness, metal content.
- Electricity & Magnetism This article explains about the field from a charge is represented by E as in Electricity and Stuff Moving.
- Electronics Manufacture-Selective Machine Soldering This article briefs a number of designs when one wants to use a machine soldering process, but needs to confine it to just a section of the board.
- Failure for Mechanical Reasons This article describes about the Lead damage, Mechanical wear-out, Mechanical forces, Substrate-related thermal stress.
- Failure in Solder Joints This article explains about Joint fracture caused by short-term loading, Joint fracture caused by creep,Fracture caused by fatigue,Combined creep and fatigue.
- Fluxes for Soldering This article describes about flux, constitutents of flux and Iflux classifications.
- Holes and voids This article explains the holes and voids.
- Pad Design This article describes about the pad design for throughhole components and surface mount components.
- Particles and Forces This article explains about the Particles that make up matter, and particle that carry force, strong and Weak Nuclear Force.
- Physics Fundamentals-Adhesion This article explains about The mechanism of why adhesives bond materials together is not fully understood. Whilst surfaces can exert strong attractive forces, these are negligible unless the ‘adherends’ (surfaces to be stuck together) are in extremely close contact (of the order of 0.5nm) over a large area.
- Physics Fundamentals-Atoms and bonding This article discusses about the ways in which atoms bind, together, but we thought a quick review of the basics would be a sensible precursor to a number of these fundamental concepts.
- Physics Fundamentals-Effects at liquid surfaces This article briefs a gradual change of properties in the interface region between the phases, which is about 1nm thick.
- Physics Fundamentals-Viscosity and flow This article discusses a force is applied to a solid, it will yield slightly, and then resist further movement.
- Physics-Dynamics This article explains about the Vector quantities, dynamics, Constant Acceleration Formulae, Motion in a Straight Line and Motion on a Flat Surface.
- Relativity This article briefs on the theory that no matter what constant speed you're travelling all the laws of physics are the same.
- Solder Materials This article explains the structure and strength of the solder materials.
- Solder Paste Basics This article describes about the solder paste basics and its constitutents.
- Solder Related Failure Causes This article explains the solder related failure causes.
- Solder Skips This article describes about the solder skips.
- Solderability Testing This article explains the soliderabilty testing.
- Soldering This article gives the introduction os soldering , its standards, process and degree of wetting.
- Surface Wettability & Surface Flatness This article explains the surface Wettability and surface flatness.
- The Sun This article explains about the Vital Stats and basics involved in the sun and star, Solar Construction and statistics of it.
- Thermodynamics This article discusses about 'thermodynamics' and 'thermal physics' from time to time.
- Units and Constants This article explains about the Fundamental Units and constants of it.
- Wave Soldering Problems This article describes good joint, process faults, solder balling, etc.
- Actuators and Drive Systems This article explains about the actuators which are one of the key components contained in a robotic system.
- Air - Water Vapor Mixtures Part I This paper explain about humidity and the adiabatic saturation process.
- Air - Water Vapor Mixtures Part II This paper explain about psychrometric chart and air-conditioning processes.
- Air - Water Vapor Mixtures Part III This paper explain about cooling towers for steam power plants.
- Applications of Viscoelastic Materials This article explains the applications of Viscoelastic Materials.
- Body Forces This article describes body forces in solid mechanics with Weight
- Carbon Dioxide (R744) - The New Refrigerant This paper explain about thermodynamic properties of carbon dioxide R744.
- Central Force Motion: Kepler’s Laws This article describes about the Equivalence between the two-body problem and Kepler’s problem.
- Combustion This paper explain about combustion of theoretical air and air-fuel ratio.
- Complementary Energy This article explains The Crotti-Engesser Theorem and Complementary Energy.
- Conservation Laws for Systems of Particles This article briefs about the application of Newton’s second law to a system of particles and derive some useful relationships expressing the conservation of angular momentum.
- Conservative Internal Forces and Potential Energy This paper describes the Internal forces arise from the natural dynamics of the system in contract to external forces which are imposed from an external source.
- Constant Acceleration: Car Physics This paper illustrate about the Constant acceleration, Weight and contact forces and Energy and power also determines the factors of acceleration, speed, time, distance.
- Constant Acceleration: Graphs, errors, significant figures, dimensions and units This article explains about the ement-time graphs various Units on graphs, Errors, error bars and significant figures, plotting program, also explains about how does the frequency, of a pendulum depend on the length.
- Constant Acceleration: The physics of sailing This article describes about Newton's laws, vector subtraction, Archimedes' principle.
- Constant Acceleration: The plane on the conveyor belt This paper describes about a plane is on a conveyor belt which moves in the opposite direction.
- Continuum Models and Micromechanics This article explains Continuum Models and Micromechanics.
- Curvilinear Motion. Cartesian Coordinates This article briefs about Kinematics of curvilinear motion & Velocity, acceleration vector and cartesian coordinates.
- Degrees of Freedom and Constraints, Rectilinear Motion This article describes about the degrees of freedom refers to the number of independent spatial coordinates that must be specified to determine the position of a body.
- Differential Motion This article affords the concept of the development of fundamental methods for achieving such coordinated motion in multiple-joint robotic systems.
- Dynamics This article describes about the dynamic behavior is described in terms of the time rate of change of the robot configuration in relation to the joint torques exerted by the actuators.
- Elastic Buckling This article explains about the elastic buckling.
- Elastic Strain Energy This article describes principles and work of strain energy with Castigliano’s Second Theorem.
- Elasticity Applications---Torsion This article explains about torsion basic relations, stress distribution.
- Energy - Maximum Available Work Potential Part I This paper explain about a wind turbine.
- Energy - Maximum Available Work Potential Part II This paper explain about adiabatic control volumes.
- Exergy - Maximum Available Work Potential Part III This paper explain about heat transfer to a control volume.
- Energy and Power: Rolling: the physics of wheels This article briefly explains about the energy and power of the rollinh wheels.
- Energy in Deforming Materials This articles describes enery and work on particle Mechanics and other energys principles.
- Energy Methods: Lagrange’s Equations This paper describes about the derivation of Lagrange's equation in cartesian coordinates and extension to general coordinate systems.
- Entropy - a New Property Part I This paper explain about definition and evaluating entropy.
- Entropy - a New Property Part II This paper explain about aircraft gas turbine engines.
- Equations of Motion This article explains about the one, two and three dimensional equation with the equation of equilibrium.
- Equilibrium of Stress This article deals with the Equilibrium of Stress in solid mechanics.
- Failure of Elastic Materials This article describes failure theories, Maximum shear thoery, von mises theory.
- Flute acoustics: Acoustic impedance for the lowest note on the flute This article briefs about the lowest note on a flute is the easiest to explain, because for this note the instrument has all tone holes closed, and so most closely approximates a cylinder.
- Flute acoustics: an introduction This article explains about the flutist blows a rapid jet of air across the embouchure hole and the pressure inside the player's mouth is above atmospheric (typically 1 kPa: enough to support a 10 cm height difference in a water manometer).
- How Do Woodwind Instruments Work? This article decribes about a simplified introduction to the woodwind family and how they work, also describes their different shapes and different types of excitation (air jet or reed) and how these give rise to some of their different behaviours.
- How harmonic are harmonics? This paper describes about the spectrum of a single note from a musical instrument usually has a set of peaks at (approximately) harmonic ratios.
- Human Sound: Formant: what is a Formant? This article briefs about the spectral peaks of the sound spectrum |P(f)| are called formants and the one broadly used in acoustics research and industry.
- Human Sound: Hearing test on-line: sensitivity, equal loudness contours and audiometry This article explains about test measures in which the relative sensitivity of your ears at different frequencies has been explained.
- Inertial Instruments and Inertial Navigation This article briefs the Inertial Platforms, Accelerometers and various applications of Inertial Systems.
- Internal Stress This articles explains about Internal Stress in solid mechanics.
- Linear Impulse and Momentum. Collisions This article briefs about the Conservation of Linear Momentum, Collisions and Linear Momentum.
- Material Models This article discusses briefly about the material models like the elastic model, the viscoelastic model, the plastic model, and and the viscoplastic model.
- Mechanics Modelling This article describes Mechanics Modelling with the mechanics problem ,constitutive equation and Mathematics model.
- Newton's Law: What are coriolis forces? This article explains about the large scale winds and ocean currents move clockwise in the Northern hemisphere and anticlockwise in the Southern hemisphere.
- Newton's laws: background and limitations This article briefly explains about the Newton's three laws, background and limitations of it.
- One Dimensional Axial Deformations This article describes the One Dimensional Axial Deformations.
- Orbit Transfers and Interplanetary Trajectories This article briefs about the outer solution of hohmann transfer, Hyperbolic escape and capture.
- Pendulums This article explains about a pendulum which is a rigid body suspended from a fixed point (hinge) which is offset with respect to the body’s center of mass.
- Pipes and Harmonics This article briefs about closed conical bores have the same set of resonances as open cylindrical bores of the same length, whereas closed cylindrical bores of the same length have only odd harmonics starting one octave lower.
- Planar Kinematics This article briefs about one of the most fundamental disciplines in robotics, providing tools for describing the structure and behavior of robot mechanisms.
- Plane Strain This article describes the plane strain with its analysis and principles.
- Plane Stress This article explains the Plane Stress with its analysis and principles.
- Pure Substances This paper explain about the phase change, property table and diagrams.
- Pure Substances Ideal Gas Equation of State This paper explain about the ideal gas equation.
- Relative Motion using Rotating Axes This article explains about the Relationships between position, velocity and acceleration vectors from rotating to non-rotating coordinate systems.
- Relative Motion using Translating Axes This article explains about the Types of observers and and the absolute motion of a passenger inside an aircraft is best described if we first consider the motion of the passenger relative to the aircraft, and then the motion of the aircraft relative to the ground.
- Rheological Models This article explains mechanical, maxwell, the kelvin and three element models
- Robot Mechanisms This paper describes about a machine capable of physical motion for interacting with the environment.
- Simple Harmonic Motion: AC circuits: alternating current electricity This article explains about the Alternating current (AC) circuits explained using time and phasor animations. Impedance, phase relations, resonance and RMS quantities.
- Simple Harmonic Motion: Chladni patterns for violin plates This article explains the geometry of the different types of vibration of violin plates and introductory explanation of modes of vibration and a library of photographs of the Chladni patterns of the bellies and backplates of two different violins.
- Simple Harmonic Motion: What is a Sound Spectrum? This article explains about a sound spectrum which displays the different frequencies present in a sound.
- Standing Waves: Bows and strings This article briefs the bow that touches the strings is made of horsehair (or a synthetic substitute).
- Statics This article explains about the duality of Differential Kinematics and Statics, Energy Method and Equivalent Joint Torques and free body diagram.
- Steam Power Cycles Case Study - The General James M. Gavin Steam Power Plant This paper explain about background and schematic diagram for analysis.
- Steam Power Cycles Part I This paper explain about ideal rankine and reheat cycles.
- Steam Power Cycles Part II This paper describe about open and closed feedwater heaters.
- Strain This article describes strains and one,two,three dimensional Strains.
- Strain Energy Potentials This article describes Strain Energy Potentials.
- Strings, standing waves and harmonics This article describes the non-electronic instruments, the stable, controlled vibration is produced by a standing wave.
- Surface and Contact Stress This article explains about the stress distributions, equivalent forces and moments also with shear Stress.
- The Elementary Beam Theory This article explains about the elementary beam theory.
- The First Law of Thermodynamics for Closed Systems Part I This paper explain about energy equation for closed system.
- The First Law of Thermodynamics for Closed Systems Part II This paper explain about ideal stirling cycle machines.
- The First Law of Thermodynamics for Closed Systems Part III This paper explain about Air-standard diesel cycle engine.
- The First Law of Thermodynamics for Closed Systems Part IV This paper explain about Air-Standard otto cycle engine.
- The First Law of Thermodynamics for Control Volumes Part I This paper explain about the energy equation for control volumes.
- The First Law of Thermodynamics for Control Volumes Part II This paper explain about the steam power plants.
- The First Law of Thermodynamics for Control Volumes Part III This paper explain about the refrigerators and heat pumps.
- The Fundamental Concepts and Principles of Mechanics This article explains about the Fundamental Concepts and Principles of Mechanics with newton first, second and third law.
- The Principle of Minimum Potential Energy This article explains the principle of minimum potential energy.
- The Response of Real Materials This articles discuss briefly about the response of real materials with tension test, compression test, Shear test, cyclic tests and other.
- The Response of Viscoelastic Materials This articles explains all testing process of Viscoelastic Materials.
- The Second Law of Thermodynamics This paper explain about thermodynamics of second law.
- The Statics of Particles This article describes about the state of particles with equillibrium of a particle and rough,smooth surfaces.
- The Statics of Rigid Bodies This article explains about the statics of rigid bodies with equillibrium of rigid bodies and joints, Connections.
- The Thin-walled Pressure Vessel Theory This article describes about the Thin-walled spheres,cylinders, external pressure.
- Thermodynamic Systems This paper describes about thermodynamic process, cycle, pressure, Equilibrium and system.
- Thermodynamics and Energy This paper explain about form of energy, force and works.
- Variable Mass Systems: The Rocket Equation This article explains about the Rocket Equation and variable mass terms os the systems.
- Vibration, Normal Modes, Natural Frequencies, Instability This article briefs about the different modes of vibration and natural frequencies and its instability.
- Virtual Work This article explains principle of virtual work for single particle and deformed bodies.
- Volumetric Strain This article explains two and three dimensional volumetric strain
- Weigth and contact forces: Young's modulus, Hooke's law and material properties This article briefs the the origin of elastic properties and Hooke's law by consideration of the forces and energies between atoms or molecules in a solid.
- Auto Repair: Brake Failure This article disputes about the importance of the car brakes.
- Auto Tune-Ups: DIY: What You Need and What You Need to Remember When Tuning Your Auto This article explains about some of the basic tools and auto parts you’ll need when tuning your own vehicle.
- Automation Systems This article briefs about an automation system (or any other control system) consists of two big parts; control and power. The control side is made up from electronic cards and some other small parts.
- Basics of Tail Light Maintenance This article explains about the tail lights which is a system that is composed of various types of lights that assume different functions.
- Car Maintenance 101: Checking Your Braking Components This article explains about the most important auto systems installed in your vehicle, but when was the last time you actually inspected your numerous brake components.
- Car Maintenance 101: Diagnosing Your Car’s Steering Problems This article explains about the steering wheel which is basically connected by a series of auto parts to your wheels, that’s why each time you turn your steering wheel, your front wheels turn as well.
- Car Maintenance 101: Diagnosing Your Suspension Problems (Part I) This article explains about how to basically controls the involuntary, bouncing movement naturally created by your car, to make your travels a lot more comfortable and stable.
- Changing Brake Pads This article briefs the Brake pads which are one of the components in your car that always have to be checked.
- Control Panel Design Approaches This article describes about how are electrical (and pneumatic) control panels for industry designed and built.
- Control Panel Layout And Wiring Best Practices. This article explains about the quality of the wiring methods used in an industrial control panel can vary quite widely.
- Designing For Arc-Flash This article explains how to work on live electrical equipment is making commissioning, startup, and tuning of electrical control systems awkward and cumbersome.
- Detecting Vehicle Defects This paper describes about how to detect mechanical defects, no technologically advanced MRIs or CT scans are necessary.
- Grain Handling Fire & Explosion Hazards For Control Engineers This paper describes about the primary controls and sensors that are being added to reduce the risk of explosions and fires.
- Impossible Perfection This article discusses about Carnot’s equation for ideal efficiency of a cyclic device converting heat to work and operating between two temperatures specified on the Kelvin scale.
- Kicking the Travel Drug This article explains about the Fleeing futility, Legitimate energy use, Execution trumps and self-indulgence.
- PLC or PAC? VFD or VSD? This paper briefs about some differences appearing, but generally the following excerpt seems to capture what a PAC is.
- Powering Up A Panel For the First Time This paper describes about how to Power Up a Control Panel for the first time,without tripping breakers or blowing things up if things are wired wrong.
- Quantum Mechanics This article briefs about a branch of physicswhich deals with physical phenomena at microscopic scales, where the action is on the order of the Planck constant.
- Quantum Mechanics- classical mechanics This article explains about a satellite around the earth, showing perpendicular velocity and acceleration (force) vectors.
- Quantum Mechanics- fractional quantum mechanics This article explains about a generalization of standard Quantum mechanics, which naturally comes out when the Brownian-like quantum paths substitute with the Lévy-like ones in the Feynman path integral.
- Quantum Mechanics- heat pump This article briefs aboput a device that provides heat energy from a source of heat to a destination called a "heat sink".
- Quantum Mechanics- Measurement This paper briefs on a cornerstone of most natural sciences, technology,economics, and quantitative research in other social sciences.
- Quantum Mechanics- quantum computer This article explains about acomputation device that makes direct use of quantum-mechanical phenomena, such as superposition and entanglement, to perform operations on data.
- Quantum Mechanics- quantum decoherence This article describes about the loss of coherence or ordering of the phase angles between the components of a system in a quantum superposition.
- Quantum Mechanics- quantum state This article explains about a quantum state is given as a vector in a Hilbert space, called the state vector.
- Quantum Mechanics- Quantum statistical mechanics This article explains about statistical mechanics applied to quantum mechanical systems. In quantum mechanics a statistical ensemble (probability distribution over possiblequantum states) is described by a density operatorS, which is a non-negative, self-adjoint, trace-classoperator of trace 1 on the Hilbert space Hdescribing the quantum system.
- Quantum Mechanics- relativistic quantum mechanics (RQM) This article explains about the theory which is applicable to massive particles propagating at all velocities up to those comparable to the speed of light c, and can accommodatemassless particles.
- Quantum Mechanics- Uncertainty This article explains about Uncertainty which is a term used in subtly different ways in a number of fields, including philosophy, physics, statistics,economics, finance, insurance, psychology, sociology,engineering, and information science.
- Quantum Mechanics- wave function This article explains the quantum state of a system of one or more particles, and contains all the information about the system.
- Quantum Mechanics-Accelerator physics This article briefs about an accelerator physics is a branch of applied physics, concerned with designing, building and operating particle accelerators
- Quantum Mechanics-Acoustic This article explains about the interdisciplinary science that deals with the study of allmechanical waves in gases, liquids, and solids including vibration, sound,ultrasound and infrasound.
- Quantum Mechanics-angular momentum This article describes about a measure of the amount of rotation an object has, taking into account its mass, shape and speed.
- Quantum Mechanics-Astrophysics This article explains about the branch of astronomy that deals with the physics of the universe, especially with "the nature of the heavenly bodies, rather than their positions or motions in space.
- Quantum Mechanics-Atmospheric physics This article explains about the application of physicsto the study of the atmosphere. Atmospheric physicists attempt to model Earth's atmosphere and the atmospheres of the other planets using fluid flowequations, chemical models, radiation balancing, and energy transfer processes in the atmosphere (as well as how these tie into other systems such as the oceans).
- Quantum Mechanics-Atomic, molecular, and optical physics This article describes about the study of matter-matter and light-matter interactions; at the scale of one or a few atoms.
- Quantum Mechanics-Celestial mechanics This article briefly explains about Celestial mechanics is the branch ofastronomy that deals with the motions ofcelestial objects.
- Quantum Mechanics-Chemical physics This article discusses about a subdiscipline of chemistry and physics that investigates physicochemical phenomena using techniques from atomic and molecular physics and condensed matter physics.
- Quantum Mechanics-Computational physics This article describes about the study and implementation of Numerical analysis to solve problems in physics for which a quantitative theory already exists.
- Quantum Mechanics-Condensed matter physics This paper deals with a branch of physics that deals with the physical properties of condensed Phases of matter.
- Quantum Mechanics-Continuum mechanics This article explains about Continuum mechanics is a branch of mechanics that deals with the analysis of the kinematics and the mechanical behavior of materials modeled as a continuous mass rather than as discrete particles.
- Quantum Mechanics-Density This article explains about the density, or more precisely, the volumetric mass density, of a substance is its mass per unit volume.
- Quantum Mechanics-digital physics This article explains about a collection of theoretical perspectives based on the premise that the universe is, at heart, describable by information, and is therefore computable.
- Quantum Mechanics-Econophysics This article explains about an interdisciplinary research field, applying theories and methods originally developed by physicists in order to solve problems ineconomics, usually those including uncertainty or stochastic processes andnonlinear dynamics.
- Quantum Mechanics-force This article explains about a force is any external effort that causes an object to undergo a certain change, either concerning its movement, direction, or geometrical construction.
- Quantum Mechanics-frame of reference This article briefs about a coordinate system used to represent and measure properties of objects, such as their position andorientation, at different moments of Time.
- Quantum Mechanics-Friction This article explains about the Force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.
- Quantum Mechanics-Gravitation This article briefs about Gravitation, or gravity, is a natural phenomenon by which all physical bodiesattract each other.
- Quantum Mechanics-waveguide This article describes about a structure that guides waves, such as electromagnetic waves orsound waves.
- Quantum Mechanics-Hardness This article explains about a measure of how resistant solid matter is to various kinds of permanent shape change when a force is applied.
- Quantum Mechanics-heating This article explains about transfer of energy, from a hotter body to a colder one, other than by work or transfer of matter.
- Quantum Mechanics-linear momentum This aarticle describes about the product of the Mass and Velocity of an object.
- Quantum Mechanics-mass This article descrbes about a property of a physical body which determines the body's resistance to being accelerated by aForce and the strength of its mutualgravitational attraction with other bodies.
- Quantum Mechanics-Nonlinear optics This article briefs about the branch of optics that describes the behavior oflight in nonlinear media, that is, media in which the dielectric polarization Presponds nonlinearly to the electric field E of the light.
- Quantum Mechanics-Nuclear astrophysics This article discusses about an interdisciplinary branch of physics involving close collaboration among researchers in various subfields of nuclear physics andastrophysics, with significant emphasis in areas such as stellar modeling, measurement and theoretical estimation of nuclear reaction rates, cosmology,cosmochemistry, gamma ray, optical and X-ray astronomy, and extending our knowledge about nuclear lifetimes and masses.
- Quantum Mechanics-Nuclear physics This article explains about the field of physics that studies the constituents and interactions of atomic nuclei.
- Quantum Mechanics-Optics This article discusses about an optics which is the branch of physics which involves the behaviour and properties oflight, including its interactions with matter and the construction of instrumentsthat use or detect it.
- Quantum Mechanics-Particle physics This article explains about Particle physics is a branch of physics which studies the nature of particles that are the constituents of what is usually referred to as matter and radiation.
- Quantum Mechanics-Polymer physics This article describes about the field of physics that studies polymers, their fluctuations,mechanical properties, as well as the kinetics of reactions involving degradation and polymerisation of polymers and monomers respectively.
- Quantum Mechanics-Pressure This article briefs about the ratio of force to the area over which that force is distributed.
- Quantum Mechanics-propagator This article explains about the propagator gives the probability amplitude for a particle to travel from one place to another in a given time, or to travel with a certain energy and momentum.
- Quantum Mechanics-quantum chromodynamics (QCD) This article briefs about the QCD is a type of Quantum field theory called a non-abelian gauge theory with symmetry group SU(3).
- Quantum Mechanics-quantum field theory (QFT) This article explains about a theoretical framework for constructing quantum mechanical models of subatomic particles in particle physics and quasiparticles incondensed matter physics.
- Quantum Mechanics-quantum mechanical system This article briefs about confined spatially—can only take on certain discrete values of energy.
- Quantum Mechanics-quantum optics This article explains about Light propagating in a vacuum has its energy and momentum quantized according to an integer number of particles known as photons.
- Quantum Mechanics-renormalization This article describes about the statistical mechanics of fields, and the theory of self-similar geometric structures, renormalization is any of a collection of techniques used to treat infinities arising in calculated quantities.
- Quantum Mechanics-scattering theory This article briefs about scattering theory is a framework for studying and understanding the scattering of waves and particles.
- Quantum Mechanics-Solar physics This article briefs about the branch of astrophysics that specializes in the study of the Sun.
- Quantum Mechanics-Solid-state physics This article describes about the study of rigid matter, or solids, through methods such as quantum mechanics, crystallography, electromagnetism, and metallurgy.
- Quantum Mechanics-Space physics This article explains about the study of plasmas as they occur naturally in the universe.
- Quantum Mechanics-Statistical mechanics This article explains about the average behaviour of amechanical system where the state of the system is uncertain.
- Quantum Mechanics-thermal efficiency This paper describes about a dimensionless performance measure of a device that uses thermal energy, such as aninternal combustion engine, a steam turbine or asteam engine, a boiler, a furnace, or a refrigerator.
- Quantum Mechanics-vacuum state This article briefs about the quantum state with the lowest possible energy.
- Spark Plug Functions and Conditions This article briefs about the spark plug which is responsible for providing an electrode gap to produce an ignition to the vapor packed in fuel-air mixture.
- The D in PID Control This article discusses the classic method of controlling a single variable in a process with feedback only.
- Top Ten Common Problems: Push Starting When You Have a Dead Battery This article briefs about how to show you more effective and safer ways by which you can jump-start a problem battery.
- Wind, Solar, Storage and Electric Cars – Our high tech renewable future! This article explains about how renewable energy for power plants is making a greater impact and how it may look not many decades out as wind and solar power are intelligently integrated into a power grid.
- Quantum Mechanics_triboelectric effect This article explains about a type of contact electrification in which certain materials becomeelectrically charged after they come into contact with another different material through friction.
- A Guide to Optimizing Speaker Performance This paper describes about some principles that should be applied for the safe operation of your DJ system set-up.
- Computational Motor Control: Dynamics This article briefs about the equations of motion for a one-joint and then two-joint (planar) arm.
- Computational Motor Control: Kinematics This article describes about how to develop the equations for forward and inverse kinematic transformations.
- Computational Motor Control: Muscle This article explains about very simplified models of muscle force and work up to descriptions of more physiologically realistic models.
- Dynamical Systems This article explains about a system which becomes dynamical (it is said to have dynamics when a mass is attached to the spring.
- Everything You Wanted To Know About Speakers This article briefs about the Speakers represent one of the most important choices you can make as to the final sound that you will be hearing in your home entertainment room.
- Flute Care and Maintenance This article explains about the flute is probably the most fragile of all the band instruments.
- Friction This article explains about Friction is a non conservative force that always acts in the opposite direction of the object it is acting on.
- Gears and Pulleys This article briefs about a pulley is a wheel driven by a motor.
- How the Ancients thought about Mechanics This article explains about a nice article about mechanics in the pre-renaissance era and how the ancients thought about Mechanics.
- Machining and injection This article explains about how to adjust our solid work geometry and redo the toolpath on the NX.
- Modding a Lamp This article explains about how to modd a lamp.
- Modelling Action Potentials This article explains about a model of voltage-gated ion channels in a single neuron to simulate action potentials.
- Modelling Dynamical Systems This article briefs about a dynamical system such as the mass-spring system we saw before, can be characterized by the relationship between state variables s and their (time) derivatives s˙
- Resonance and Radiation of Acoustic Instruments This article discusses about the resonant characteristics of acoustic instruments.
- Statics Torque This article explains about a different type of quantity, the units of torque are or J.
- Supercapacitor For Faster Electric Vehicles This article describes about supercapacitor that provides two times more energy and power, paving the way for faster acceleration in electric vehicles and longer battery life in portable electronics.
- The Duck Automata of Vaucanson This article explains about the cultural impact of the Duck automata.
- Uniform Circular Motion This article briefs about the acceleration is directed towards the center of the motion.
- Vibration Isolation and Damping This article explains about the process of deciding on a vibration isolator for a particular application, there are a number of critical pieces of information which are necessary to define the desired functionality of the isolator.
- Will plug-in automobiles be a success? This article discusses about the Cost Problem with Plug-In Electric Automobiles.
- Arc, Gas and Fusion Welding This article explains the definition, advantages and disadvantages of Arc, Gas and Fusion Welding.
- Backlash, Shifting of Gears and Tooth Profile This article describes about the Backlash, Shifting of Gears and Tooth Profile in detail.
- Basic concepts of thermodynamics This article explains about thermodynamics, its properties and its states.
- Basics of kinematics and dynamics This article explains about kinematics and dynamics, its properties and its states.
- Camshaft This article explains the camshaft , its classifications, motions and duration.
- Centrifugal Pumps This article describes the centrifugal pumps, centrifugal force and parts of Centrifugal pumps.
- Classifications of Bending Processes This article discusses about the angle, straightening, seaming, roll, flanging, roll forming, draw and compression process in Bending.
- Cold Working and Classification of Squeezing Process This article describes about the cold working, effects and advantages with the classification os squeezing process.
- Compressible Flow – Fundamentals This article discusses about the fluis dynamics and compressible vs incompressible flow.
- Double Slider Crank Chain This article describes about three important inversions of double slider crank chain. 1) Elliptical trammel. 2) Scotch yoke mechanism. 3) Oldham‘s Coupling.
- External Gear Pump This article explains the external gear pump overview, how it works, advantages, disadvantages and applications.
- Flow of Gases This article explains the flow of gases like laminar vs turbulent flow, steady vs unsteady flow etc.
- Fluids and Solids & Liquid and Gases This article discusses about the fluids and solids, newtonian/non-newtonian fluids & liquid and gases.
- Fluids Mechanics This article explains fluids and newtons law of viscosity.
- Friction and Clutch This article explains the definition, structure and working functions of Friction and clutch.
- Furnaces This article discusses about the furnaces like Cupola furnace, direct fuel-fired furnace and Induction furnace and casting defects.
- High Speed Flow This article discusses about the High-speed flow around objects, High-speed flow in a channel, Critical Mach number and Effects of Mach number and compressibility.
- Internal Gear Pump This article describes the internal gear pump overview, how it works, advantages, disadvantages and applications.
- Is it a Machine, a Mechanism, or a Structure? This article discusses about the Fundamentals of Kinematics and Dynamics of Machines and Mechanisms.
- Kinematics This article describes about the kinematics, kinematic pairs and its definition and types.
- Machine This article describes the machines, kinematic chain with three lower pairs, kutzbach criterion, grashoff's law and kinematic Inversion.
- Metal Casting Process This article describes about casting and types of casting and sand casting.
- Motion and its types This article explains about the motion and the three main types of constrained motion in kinematic pair.
- Multistage Centrifugal Pumps This article discusses about the multistage centrifugal pumps, its efficiency and energy usage.
- Other Clutches This article discusses about the other clutches like dog clutches, cone clutches, torque limiter and hydraulic clutch and etc.
- Plaster Molding, Permanent Mold Casting and Die Casting This article describes the definition, advantages and disadvantages of the Plaster Molding, Permanent Mold Casting and Die Casting.
- Plastic Manufacturing Processes I This article describes about plastic manufacturing processes with Injection molding, blow molding and its types.
- Plastic Manufacturing Processes II This article explains about the comparsion of extrusion and injection blow molding, compression molding, transfer molding, cold molding, rotational and Foam molding in detail.
- Plastics This article explains about the plastics, its types, advantages and disdvantages .
- Positive Displacement Pumps This article explains positive displacement pumps and its types, rotary and reciprocating pumps in detail.
- Properties of Fluids This article explains the general propeties of fluids.
- Quick Return Mechanisms This article discusses about the various quick return mechanisms commonly used are i) Whitworth ii) Drag link. iii) Crank and slotted lever mechanisms.
- Reversible and Irreversible Process This article discusses about the reversible and irreversible process in thermodynamics.
- Rocking Mechanism This article explains about the Ratchet and Pawl mechanism, Geneva, pantograph, toogle, hookie point and Ackermann steering gear mechanism.
- Rotary Pumps This article explains about the rotary pumps, advantages and disadvatages of rotary pumps and its types.
- Shearing and its classification This article describes about the shearing and its clssification in detail.
- Shell Molding and Investment Casting This article explains abou the patterns used in sand casting with advantage and disadvantages of shell moulding and Investment casting.
- Shock Wave This article discusses about the shockwave, shockwave in In supersonic flows and Due to nonlinear steepening.
- Single and Double Reciprocating Pumps This article describes the operation and structure of Single and Double Reciprocating Pumps briefly.
- Special Forming Process This article describes the great variety of sheet metal forming methods, mainly using shear and tensile forces in the operartion.
- System, Surroundings, Types of Systems, Intensive and Extensive Properties This article describes the System, Surroundings, Types of Systems, Intensive and Extensive Properties in detail.
- Terminology in compressible and incompressible in fluid dynamics This article describes about the Magnetohydrodynamics, Other approximations and Terminology in compressible and incompressible in fluid dynamics in detail.
- The Casing, Prime Movers and Characteristics of Centrifugal Pumps This article explains the definition, structure of the casing and Prime movers and also discusses the Characteristics in detail.
- The Valves of a Centrifugal Pump This article describes about the valve of a centrifugal pump with its working principle.
- Turbines and its types This article discusses about the turbines, impulse turbines and reaction turbines.
- Types of clutch This article describes about multiplate, vehicular, wet vs dry, automobile, push/pull, motorcycles and centrifugal clutch.
- Types of forging II This article discusses about the open die and closed die forging, forward and backward extrusion, upsetting, electro-upsetting, hobbing and nosing.
- Types of Forging III and defects in forging This article explains about the coining, ironing, swaging and defects in forging.
- Types of forging Presses This article describes about the presses and types of forging presses.
- Types of Pumps This article explains the various types of pumps and advantages and disadvantages in detail.
- Types of Turbines This article explains about the types of turbines.
- Types of welding This article describes the the definition, advantages and disadvantages of shielded metal arc, submerged arc, gas metal arc, flux cored arc and electro gas welding.
- Types of Welding II This article explains about the brazing and its types , Soldering, Inert gas welding, Meatl inert gas and GTAW.
- Types of Welding III This article describes about the Plasma arc, resistance, electronic beam and laser beam welding definition, advantages and disadvantages.
- Types of Welding IV and Weld Defects This article explains about the thermit welding, diffusion welding and friction welding. It also defines the weld defects.
- Units This article describes the SI system of units, primary units and derived units.
- Vane Pump This article explains the vane pump overview, how it works, advantages, disadvantages and applications.
- Vertical Centrifugal Pumps and Characteristics This article explains about the Vertical Centrifugal Pumps and Characteristics with centrifugal pumps flow and pressure.
- Welding and its Classification This article describes about the welding and its classification in detail with the Welding practice and equipment.
- Worm Gear This article discusses the definition, structure and working functions of Worm gear.
- Abrasive Water-Jet Cutting This article briefs the introduction, applications, advantages and Limitations of Abrasive Water-Jet Cutting.
- Air Compressors This article explains the aircompressors and its types in detail.
- Application of Time Delay Valves This article discusses the application of time delay valves.
- Back pressure and optimal expansion and Propellant efficiency This article describes about the Back pressure and optimal expansion and Propellant efficiency.
- Basic Concepts of Engineering Mechanics This article explains the basic concepts like mass, volume, matter an state of rest and motion etc.
- Cascading Method of Signal Elimination This article explains the Cascading Method of Signal Elimination.
- Chemical Machining and Milling This article explains the chemical machining and chemical milling, step in chemical milling and applications.
- Classification of Forging Processes Based on Arrangement of Dies This article describes the Open Die Forging, its features and Closed die forging, its features.
- Classification of Pneumatic Cylinders This article describes the tandem cylinder, rodless cylinder with mechanically coupled and magnetic coupled.
- Classification of Rolling Based on the Arrangements This article explains the two high, three high, four high, cluster, planetary, tandem and sendizmer mill.
- Classification of Rolling Based on the Product This article discusses the metal flow pattern in rolling and Roll camber.
- Compressor Air System This article describes the air pre filter and air receiver.
- Concept of Flow stress and Generalized Hooke’s Law This article explains the Concept of Flow stress and Generalized Hooke’s Law in detail.
- Concept of Strain Hardening and Effects of Mechanical Working This article describes the conceot of strain hardening, advatages of metal working, effects of mechanical working with propeties of metal.
- Construction of Regulator and Air Lubricator This article explains the construction of regulator and air lubricator.
- Control of Double Acting Cylinder This article describes the Types of Relays, Indirect Action of Double Acting Cylinder Using a Relay and Logic Circuits.
- Controlling of Pneumatic Cylinders This article explains the Pneumatic cylinders can be controlled by the three methods.
- Controlling of Pneumatic Cylinders - II This article describes the Controlling of Pneumatic Cylinders with Methods of Checking The End Positions and Use of Limit Switches.
- Coordinated Motion Control This article describes the co-ordinated motion control.
- Defects - Metal Working and Rolled Products This article explains the defects in general rolled products and operational rolled products.
- Defects in Forming and Forming Limit Criteria This article discusses the defects in forming and forming limit criteria in detail.
- Deformation in Extrusion This article discusses the Homogeneous Deformation, Deformation with more friction between billet and container wall and Deformation with very high friction.
- Deformation of Metals This article explains the deformation of metals and deformation zone geometry.
- Die Design Parameters This article explains the Parting Line, Flash and Gutter, Draft Angles and Fillet.
- Dies and Toolings This article explains the Dies and Toolings with types of extrusion dies.
- Directional Control Valves This article describes the Directional Control Valves and its types in detail.
- Drawing This article discusses about the drawing dies and wire drawing in detail.
- Electrical Discharge Machining (EDM) This article discusses about the schematic processes of EDM process, Applications, limitations, advantages and working principle of EDM.
- Electro hydraulic and Electromagnetic Forming This article explains the principle and construction of Electro hydraulic and Electromagnetic Forming .
- Electro Pneumatics This article discusses the Symbols of Switches-Contactors and Symbol-Single solenoid Valves.
- Electrochemical Machining This article briefs the introduction, advantages and Limitations of ECM.
- Explosive Forming This article explains unconfined type and confined type explosive forming.
- Extrusion and types This article describes the extrusion and its types with advantages and limitations.
- Extrusion Equipment This article discusses the hydraulic press and vertical press.
- Extrusion Variables This article describes the Type of extrusion (direct or indirect), Extrusion Ratio, Temperature, Extrusion pressures and Lubrication.
- Flow Control Valves This article explains the one way flow control valve, Supply Air Throttling and Exhaust Air Throttling.
- Forging - Operations and Classifications This article explains the Different Forging Operations and Classification of Forging Processes.
- Forging Equipment This article explains the Forging Equipment and types of forging press.
- Francis Turbine This article explains about the francis turbine in detail..
- Friction Hill and CFD This article discusses the factors affecting friction hill and Load in Closed die forging.
- High Energy Rate Forming (HERF) Processes This article describes the important features of HERF processes, advantages, limitations and applications of HERF processes.
- Introducing Propellant into a Combustion Chamber This article explains about the solid rocket motor, rocket ignition, rocket combustion and rocket nozzles.
- Introduction and Concepts of Rolling, Forging and Extrusion This article discusses the Introduction and Concepts of Rolling, Forging and Extrusion.
- Introduction to Pneumatic Control This article discusses the Characteristics of Compressed Air, Advantages and General Applications of Pneumatic Control and Structure of Pneumatic Control System.
- Isostatic pressing This article explains the Isostatic pressing with cold and Hot.
- Laser–Beam Machining (LBM) This article describes the introduction, applications, laser beam cutting, advantages and Limitations of LBM.
- Lift, Postition, Number, Maintenance and Alternatives of Camshaft This article describes Lift, Postition, Number, Maintenance and Alternatives of Camshaft briefly.
- Lifting and Shifting This article explains the Lifting and Shifting, signal overlap and Multi Cylinder Applications Signal Elimination.
- Lobe Pump This article discusses the lobe pump overview, how it works and advantages.
- Lubrication and Defects in Extrusion This article explains the Lubrication and Defects in Extrusion.
- Magnetic Reed Switches This article explains the magnetic reed switches, Electro Magnetic Relay, Holding Circuits and Pilot Assisted Solenoid Valve.
- Manufacturing and Metal Working Process Classification This article describes the Manufacturing and Metal Working Process Classification, difference between Cast and Wrought Product with Cold and hot working.
- Material Flow Lines in Forgings This article describes the Material Flow Lines in Forgings.
- Multi Position Cylinder This article discusses the Multi Position Cylinder with pneumatic control diagram.
- Multi-cylinder pumps This article discusses about the multi-cylinder pumps and its types with operations and structure.
- Not Gate This article explains the Not gate, Grouping of Set and Reset Signals and examples.
- Parameters affecting Mechanical Working Processes This article describes the parameters like Temperature of Metal, Strain Rate, Friction, Nature of Forces and Metal Structure.
- Pelton Wheel This article describes about the Pelton Wheel and its applications.
- Plane Stress, Plane Strain Stress Tensor and Biaxial Stress This article explains the Plane Stress, Plane Strain Stress Tensor and Biaxial Stress in detail.
- Pneumatic Cylinders This article explains the pneumatic cylinders and its classification.
- Pneumatic Timers This article explains the Pneumatic Timers with its circuit diagram.
- Powder Metallurgy This article describes the Powder Extrusion and Power Injection Moulding.
- Powder Metallurgy - Advantages and Limitations This article describes the briefs steps in Powder Metallurgy.
- Power in Rolling This article discusses the power in rolling.
- Pressure Sequence Valves This article describes the pressure sequence valves and its circuit.
- Process Characteristics of Wire Drawing This article explains the Process Characteristics of Wire Drawing and Wire drawing terms.
- Rolling and Steps in Rolling This article explains the rolling, steps in rolling process and classification based on temperture and arrangement.
- Rotary Actuators and Cylinder Seals This article explains the Vane type Rotary Actuator, Rotary Actuator of Rack and Pinion Type and Cylinder Seals.
- Shearing and Forming Process This article explains the shearing and forming process in detail with diagrams.
- Sheet Metal Forming - An Introduction This article describes the Metal Forming Process, Classification of Metal Working and forming Process and Sheet metal forming processes.
- Shock Wave II This article describes about the analogies, examples of shock wave with moving shock.
- Shuttle Valve This article describes the shuttle valve, OR Combination without Shuttle Valve and Use of Shuttle Valve.
- Slider crank Chain This article explains the four inversions in a single slider chain mechanism.
- Some Of The Mechanisms Which Are Used In Day To Day Life This article describes the Bell crank, Geneva Stop, Elliptical Trammel, Piston Arrangement, Rack and pinion and etc.
- Space Flight and its Types This article discusses about the overall rocket engine performance, specific impulse, and space flight and its types.
- Speed Control of Cylinders This article discusses the speed control of cylinders.
- Steps in Powder Metallurgy Technique This article discusses the Advantages and Limitations of Powder Metallurgy, Processing Stages of Powder Metallurgy and steps involved in Powder Metallurgy Technique.
- Stress, Strain and Deformation This article discusses the Concept of stress and Concept of convention stress and conventional strain, true stress and true strain and their relationship.
- Symbolic Representation of Directional Control Valves This article discusses the Symbolic Representation of Directional Control Valves.
- System of Forces This article describes the system of forces with its types.
- The Main Parameters in Rolling This article describes the parameters like Roll diameter, Friction between rolls and work piece, Deformation resistance of the metal as influenced by metallurgy, temperature and strain rate with Presence of roll tensions.
- Tube Drawing This article describes the tube drawing, drawing equipment, its process and production operation.
- Turbines in Action This article describes on four kinds of turbines according to the type of fluid that drives them: water, wind, steam, and gas.
- Two Pressure Valve This article discusses the two pressure valve, And Gate Combination and Use of Two Pressure Valve.
- Types of Propellant This article describes about the Types of Propellant.
- Types of Rocket Engines and Propellants This article discusses about the different types of rocket engines and propellants.
- Types of Shock This article explains about the detonation wave, detached shock, attached shock and recompression shock.
- Typical stress strain curves for easy deformation This article explains the Typical stress strain curves for easy deformation, Different stress- strain curves and Strain hardening type.
- Ultrasonic Machining (USM) This article explains the introduction, applications, advantages and disadvantges of USM.
- Wire EDM This article describes the application and structure of wire EDM.
- Workability of Metals This article explains the Fracture resistance , Parameters if deformation and Workability Limit Diagram(WLD).
- Aluminum based bearing materials This article explains the aluminium based bearing materials.
- Bearings in internal combustion engines This article explains the Internal combustion engine, Functions of bearings in internal combustion engines and Lubrication of the bearings in internal combustion engine.
- Copper based bearing materials This article explains the copper based bearing materials.
- Engine bearing fatigue test This article discusses the types of fatigue test rigs are used by the engine bearings manufacturers.
- Engine bearing materials This article discusses the Classification of engine bearing materials and Engine bearing layers and their functions.
- Geometrical parameters of engine bearings This article describes the Hydrodynamic lubrication, Oil clearance, Eccentricity and Crush height.
- Hydrodynamic journal bearing This article explains the Journal bearing operation, Reynolds Equation and Engineering calculations of journal bearing performance.
- Hydrodynamic lubrication theory This article describes the hydrodynamic lubrication theory.
- Lead and tin based engine bearing overlays This article discusses the lead and tin based engine bearing overlays.
- Lubrication regimes This article discusess the Boundary lubrication, Mixed lubrication and Hydrodynamic lubrication.
- Manufacturing bi-metal strips for aluminum bearings This article explains the Technology of manufacturing bi-metal strips for aluminum bearings.
- Manufacturing bi-metal strips for copper bearings This article discusses the manufacturing bi-metal strips for copper bearings.
- Mechanisms of wear This article explains the Abrasive wear, Adhesive wear, Fatigue wear, Corrosive wear and Erosive wear.
- Modern trends in materials for high performance engine bearings This article explains the Traditional Tri-metal Bearings, pMax Black™ Bearings and “Next Generation” Materials For Extreme Load.
- Optimization of clearance design for high performance engine bearings This article describes the Hydrodynamic lubrication and optical clearance.
- Polymer based engine bearing overlays This article explains the Composition of polymer based engine bearing overlays.
- Requirements to engine bearing materials This article explains the properties required for engine bearing materials.
- Sputter bearing overlays This article discusses the sputter bearing overlays.
- Acceleration in minkowski spacetime This article explains about coordinate grid, with space dimensions and a time dimension.
- Angular acceleration of a contracting system This article explains about the the centripetal force has contracted a rotating system to half its initial radius.
- Apparent motion This article explains the four fundamental interactions of nature.
- Ballistics This article explains the Uniform motion with respect to an inertial coordinate system.
- Ballistics and the earth's rotation This article explains about the motion as it proceeds in real-time.
- Centrifugal effect This article explains the centrifugal effect in detail.
- Centrifugal force This article explains the centrifugal force in detail.
- Conservation of angular momentum This article explains the conservation of angular momentum.
- Coriolis effect This article discusses the coriolis effect in detail.
- Coriolis flow meter This article explains the coriolis flow meter.
- Cyclonic flow This article explains the cyclonic flow in detail.
- Equatorial bulge This article discusses the equatorial bludge and causes of turning.
- Great circles - motion over the surface of a rotating sphere This article describes about the motion relative to the rotating sphere.
- Inertial coordinate system This article discusses the inertial co-ordinate system in detail.
- Inertial oscillation This article describes about the motion of a particle that is moving over the surface of an oblate spheroid.
- Inertial oscillation – definition This article discusses the Energy conversions: doing work.
- Inertial oscillations This article explains the inertial oscillations in detail.
- Inertial oscillations - II This article discusses the Motion over the surface of a parabolic dish and an oblate spheroid.
- Inertial space This article explains the inertial space with guidance systems in detail.
- Least action visualized This article explains about the Principle of Least Action relates to the laws of motion.
- Mathematical derivations of the foucault pendulum This article discusses the mathematical derivations of the foucault pendulum.
- Physics principles of foucault pendulum This article explains the physical principles of foucault pendulum.
- Quantity of motion This article explains about Momentum and kinetic energy have in common that they are a measure of quantity of motion.
- Remarks of the coriolis effect in meteorology This article discusses the equatorial bludge and causes of turning.
- Rotational-vibrational coupling This article describes the energy conversions in rotational-vibrational coupling.
- Spacestation vertical throw This article describes about total velocity after the object that is free moving will travel in a straight line, with uniform velocity.
- Special relativity This article describes about the relations between space, time and matter.
- The coriolis effect in meteorology This article explains the coriolis effect in meteorology.
- The eötvös effect This article describes the Physical explanation of the eotvos effect.
- The foucault pendulum This article discusses the foucult pendulum in detail.
- The general theory of relativity This article describes about the preparationof Newtonian dynamics.
- The rotation of earth effect for ballistics This article describes about total velocity after the launch comes from two contributing factors.
- The sagnac effect This article explains about interference fringes is dependent on the angular velocity of the setup.
- Unification: motion of objects and propagation of light This article explains about the principle of relativity of inertial motion.
- Why laws of motion are possible This article describes about the first relativity principle Galilean relativity.
- 10 Tips for using less gas and saving more money This article explains ten tips for using less gas and saving money.
- 5 Awesome features you are likely to see in the cars of 2020 This article explains the major features of the 2020 cars.
- 5-Millionth ford f-series to roll off the lot in october This article discusses the designed a robust set of machines.
- 7 Fuel saving tips for your food truck This article describes seven fuel saving tips for your food truck.
- Air intake systems This article discusses the performance of air intake systems.
- Aircraft lightning protection This article describes the lightning strike of the absolute prevention of all effects.
- All you need to know about windscreen repairs This article explains the importance of repair and damages in the windscreen.
- Application of car dash camera This article discusses the staging automobile crashes of car dash camera.
- Automotive restoration This article discusses the how to preparing the vehicles in automotive technology.
- Basic tips and hints for looking after your car This article discusses the basic tips and hints for looking after the car.
- Benefits of replacing the fuel filter of your vehicle This article discusses the component of the fuel delivery system of your vehicle.
- Car locksmith - solution to your car key problems This article discusses the locksmith services and techniques.
- Choosing the best ford wheels This article explains which one very flexible to your car wheels and tyres.
- Cleaning tips for sparkling car window glass This article describes the cleaning the car's windows and windshields.
- Diesel engine pros and cons This article explains diesel engine advantages and disadvantages.
- Diesel powered cars: coming at you This article discusses the diesel powered cars.
- Easy way to get quality auto collision repair This article describes the service, work and process of the auto collisions.
- Essential equipment for your 4wd vehicle This article discusses the essential euipment of the 4wd vehicle.
- Fuelling the future with alternative energy This article discusses about fuelling with alternative energy.
- Get the most out of your 4x4 with the right accessories! This article discusses the truck or jeep in the 4 wheel drive (4WD) accessories.
- How long can your car stay on the road This article describes the extreme conditions and high mileage journeys.
- How to use ratchet straps for trucks This article describes is to use ratchet straps for trucks.
- Hybrid auto - how to build your own This article describes how to build a hybrid auto of your own.
- Improve gas mileage without damaging your car This article explains how to improve gas mileage without damaging your car.
- Improving your gas mileage with modern technology This article describes the part of problem in typical vehicle mileage.
- Jeep continues to smash global sales records This article describes the motor manufacturers are jeep vehicle.
- Lincoln a quieter ride through modern engineering and design This article describes the attributes of the ingenuous technology design.
- Preparing your vehicle for the start of spring This article explains the vehicle conditions and maintaining.
- Realizing your 4x4's full potential This article discusses the 4x4's utility and convenience of the worth capabilities.
- Rely on Utah auto coolant service for new radiators This article explains the smooth running of your vehicle using radiator.
- Seek assistance on automotive repair services online This article describes the proper maintenance of the vehicle.
- Take a closer look at nature's artistry while riding on your bike This article explains the mountain climbing and highway rides using bike.
- The benefits of an air start system This article discusses the process of the air starter benefits.
- The importance of custom made water proof canvas covers This article explains the important of piece equipment in the canvas covers.
- The importance of spark plugs in boating This article discusses the four reasons of the spark plugs importance.
- The most important things to keep in your car This article describes the Fuel container, Flashlight, Spare tyre and tools.
- Types of engine sensors This article explains the various types of engine sensors.
- Volvo cyclist detection This article explains the innovative safety feature of the Volvo Cyclist.
- What to look for in motorcycle boots This article explains the various types of motorcycle boots.
- Advantages of using gel bond and colloidal silica in monolithic refractories This article discusses the advantages of using gel bond and collodal silica in monolithic refractories.
- Blast Furnace (BF) - Design and Iron Making This article describes blast furnace with design and iron making.
- Blast Furnace (BF) - Refractory Lining Pattern This article explains the blast furnace refractory lining pattern.
- Blast Furnace Trough Materials and Tap Hole Clay Materials This article discusses the blast furnace trough materials and tap hole clay materials.
- Criteria for Furnace (Or Kiln) Design and Selection of Refractories This article discusses the criteria for furncae or kiln design and selection of refractories.
- Gunning and Spraying This article describes the Fundamental Differences in gunning and spraying of Tundish Wear Lining
- How Effective Are Insulating Refractory (Ceramic) Fibers This article discusses about the ceramic fibers in detail.
- How to Classify Refractory Materials This article describes how to classify refractory materials.
- How to Prevent Formation of Iron Spots (Crater) In Refractory Bricks as A Measure of Quality Control This article explains the prevention of formation of iron spots in refractory bricks.
- Induction Furnace This article explains the induction furnace, its types, advantages and disadvantages.
- Installation of Refractory Fiber Kiln and Furnace Linings This article describes the installation of refractory fiber kiln and furnace linings.
- Iron Making in Mini Blast Furnace (MBF) This article explains the making of iron in mini blast furnace.
- Kilns and Furnaces Used in Ceramic and Refractory Industries This article explains a general description and comparison of Kilns and furnaces used in ceramic and refractory industries.
- Mullite - Chrome Refractory This article describes about the mullite chrome refractory.
- Refractory Bricks and Castables This article explains the Types of insulating refractory bricks and castables - their manufacturing and installation
- Refractory Lining for Induction Furnace This article explains the Selection and operation of Refractories for Lining.
- Refractory Saggers and Muffles This article describes the refractory saggers and muffles in detail.
- Slag Corrosion Test of Refractories This article discusses about the corrosin and erosion caused to refractories.
- Type of Monolithic Refractories This article explains the types of monolithic refractories in detail.
- Use of Sillimanite in Refractories This article discusses the use of sillimanite in refractories.
- What Is an Indurating Furnace This article explains the indurating furnace in detail.
- Basic mechanisms for robotics This article explains the basic mechanisms for robotics.
- How to make a good base for your bot - II This article explains the good base for your bot.
- How to make a good base for your bot? This article describes the good base for your bot in detail.
- Robotic arms This article discusses the robotic arms in detail.
- Wheels This article discusses about the important factors of wheels.
- "Chloroplast" solar engines This article describes the features, theory of operation and its diagrams.
- "Full-featured" dual H-bridge This article discusses the variations on the bridge, such as the positive-input and negative-input versions.
- 1381-based photopoppers and 555-based photopoppers This article describes the collection of photopopper circuits based on the 1381 voltage detector.
- 4-transistor h-bridge This article describes the no combination of inputs can cause the bridge to self-destruct.
- 74*14-based photopoppers This article explains the 74*14-based circuits for photopoppers based on one head circuit design.
- 74*240-based photopoppers This article discusses the 74*240-basic photopopper functions plus reverse all on a single chip.
- A 74*245-based motor driver This article explains the use one or more 74*245 chips and maximum current capability.
- Beam head circuits – fled based heads This article explains the FLED-triggered 3 state flip-flop based on Tilden's H-bridge.
- Beam head circuits - the power smart heads This article discusses the head designs springs from a simple battery-powered design.
- Beam head circuits - the sc (schmitt comparator) head This article describes the uses fewer components; occupies and part of circuit collection.
- Beam photopopper circuits This article discusses the pair of solar engine circuits and useful photopopper circuits.
- Beam sensors - acoustic (sound) sensors This article discusses the Sensors used in BEAMbots to date fall into one of five categories.
- Beam sensors - contact sensors This article describes the two advantages and Obstacle avoidance contact sensors,
Ground contact sensors. - Beam sensors - field (electric, capacitance) sensors This article describes the good absorber of stray RF fields, so this sensor should be a good people-detector.
- Beam sensors - light sensors This article discusses the used sensors on BEAMbots to the phototropic or photophobic.
- Beam sensors - proximity sensors This article explains the Proximity sensors in four flavors and advantages, disadvantages.
- Beam sensors - state sensors This article explains the State sensors used to change your 'bot's behavior in ways (ideally) that help it protect itself.
- Beam solarroller circuits This article explains the solarroller circuit used to the the powersmart solar speeder, V2.
- Complete beambot circuits - pummer circuits This article describes the "pummer" circuit powered by one of his versions of a nocturnal solar engine.
- Fled-based solar engines This article discusses the uses of flashing LED to drive all the parts in this solar engine.
- Fracturing solids This article explains the fracturing solids.
- Geared motors This article describes the sources for gearmotors gear train to a small DC motor and Solarbotics.
- H-bridges This article describes the simplest, reversible drive circuit is the H-Bridge.
- Iron This article describes the Iron is a chemical element with atomic number 26.
- Miscellaneous beam circuits This article discusses the uses arrays of capacitors to increase voltage in a circuit.
- Motor drivers This article discusses the current amplifiers; their function is to take a low-current control signal, and turn it into a proportionally higher-current signal.
- Nocturnal solar engines This article discusses the provide power to a nighttime load and designs for nocturnal SE designs.
- Op-amp based nv nets This article discusses the set of circuits implementing Nv neurons via op-amps.
- Plasma arc welding This article explains the useful to cut any conductive metal, especially structural steel, stainless steel and non-ferrous metals.
- Resistor This article discusses the used to limit, or resist current in an electrical circuit.
- Simd1 / solar regulator This article explains the solar voltage regulator using current limiting resistors with constant brightness.
- Simd1 v0 This article describes the charging the storage capacitor through a Ge diode.
- Simd1 v1 This article explains the connected in parallel with the outputs used as a "power" switch.
- Simd1 v2 This article discusses the connected like the two junctions in one transistor.
- Simd1 v3 This article describes the SIMD1 V3 is very similar to the NPN flavor of SIMD1 V2.
- Solar cell simulators This article explains the regulated voltage required at the input of the solar cell simulator.
- Solar engines This article describes the most solar-powered robots is a circuit oscillators.
- Solarbotics stepper motor drive circuit This article explains the circuit to drive any bipolar or unipolar (via bipolar drive) stepper motor.
- Solarrollers This article describes the essentially infinite number of possible solarroller designs.
- Sound-generating circuits This article describes the two types of sound-generating circuits.
- Stepper motors This article discusses the frequency of the pulses and the direction of motor motion.
- The "fred" popper This article describes the photopopper circuit is built from two "Fred" solarengines wired together.
- The "miller popper" This article explains the Miller solarengine circuit, and turned it into an efficient photopopper circuit.
- The "miller" solar engine This article explains the power supply drops too low for reliable operation in solar engine.
- The 1381-based solar engine This article describes the 1381s detect and switch when the input voltage.
- The dual slope-sampling solar engine This article discusses the comparator input voltage near the trigger threshold in the SE.
- The gbse (gate boost solar engine) This article discusses the unique voltage doubler to increase the voltage applied to the gate of the MOSFET.
- The micropower se This article describes the "micropower" solar engine.
- The smartcap solar engine This article discusses the "burst" of energy to a 'bot right after its source of light goes away.
- The vtse solar engine This article explains the output and input of the 1381 and the other leg to the supply voltage.
- The vx2se solar engine This article explains the Vx2SE is a simple discrete voltage-doubling SE for driving an LED.
- The zener-based solar engine This article explains the solar engine based on a Zener diode.
- Tilden's 6-transistor h-bridge This article explains the basis for many BEAM driver circuits and six transistor H-bridge.
- Advantages and disadvantages versus spark-ignition engines This article discusses the advantages and disadvantages versus spark-ignition engines.
- Anti-lock braking systems (ABS) This article discusses the anti-lock braking systems.
- Archimedes' screw This article explains the early uses of archimedes's screw.
- Check valve This article explains the check valve in detail.
- Classification of IC engines This article discusses the classification of IC engines.
- Classification of internal combustion engine This article discusses the classification of internal combustion engine.
- Combustion This article discusses the combustion in detail.
- Components of an I.C engines This article discusses the components of an IC Engines.
- Compounding of steam turbines This article discusses the compunding of steam turbines.
- Diesel engine This article explains the diesel engine in detail.
- Dieseling in spark-ignition engines This article describes the dieseling in spark-ignition engines.
- Disk brake This article discusses the disk brake.
- Engine displacement This article describes the engine displacement in detail.
- Fluid dynamics This article explains the fluid dynamics.
- Fluid machines This article discusses the fluid machines and its classifcations.
- Four-stroke cycle This article explains the four-stroke cycle.
- Fractional distillation This article describes the fractional distillation.
- Governor (device) This article explains the governor device and its examples.
- Hall effect This article discusses the hall effect in detail.
- Heat transfer This article explains the heat transfer with terminology, conduction and convection.
- Hydraulic turbines —Definition This article explains the hydraulic turbines in detail.
- Ignition system This article explains the Ignition system
- Inclined plane This article discusses the inclined plane.
- Injectors This article explains the injectors in detail.
- Internal combustion engine This article explains the internal combustion engine in detail.
- Introduction to steam turbines This article explains the introduction to steam turbines.
- Kaplan turbine This article discusses the kaplan turbine in detail.
- Lever This article explains about the three classes of lever.
- Locomotive This article discusses the locomotive in detail.
- Materials for caging the sun on earth This article explains the materials for caging the sun on earth.
- Metering pump This article explains the metering pumps, piston pumps and possible problems.
- Pelton turbine This article explains the pelton turbine in detail.
- Pipeline transport This article explains the Protection of pipe lines, Pipelines for other liquids and gases.
- Piston This article describes the piston in detail.
- Plain bearing This article explains the plain bearing in detail.
- Poppet valve This article describes the uses, design and opeartion of poppet valve.
- Reading spark plugs for racing This article discusses the reading spark plugs for racing.
- Regenerative braking This article explains the braking systems.
- Relationship between torque and power This article discusses the relationship between torque and the power.
- Rotary combustion engine This article explains the rotary combustion engine with further classification and advantages.
- Shell and tube heat exchanger This article explains the shell and tube heat exchanger.
- Simple machine This article explains the simple machine in detail.
- Slurry This article discusses the slurry in detail.
- Spark plug This article discusses the spark plug in detail.
- Spark plug - II This article discusses the spark plug in detail.
- Spark plug construction This article explains the spark plug construction.
- Steam engine This article explains the combustion heat engine that makes use of the thermal energy.
- Steam engine use and development This article describes the applications of the steam engine uses.
- Steam engines types This article discusses the types of the steam engines and its advantages.
- Structural design This article describes the concept of the structural design.
- Study on automobile This article discusses the study on automobile in detail.
- Study on boiler This article discusses the classification of boiler.
- Study on boiling point This article explains the Study on Boiling point.
- Study on diesel This article explains the study on diesel.
- Study on drum brake This article explains the study on drum brake.
- Study on engine This article discusses the study on engine.
- Study on friction This article explains the study on friction and its types in detail.
- Study on gas turbine This article explains the Gas turbine in detail.
- Study on heat This article discusses the study on heat in detail.
- Study on kinetic energy This article describes the study on kinetic energy.
- Study on pump This article discusses the working and types of pump.
- Study on turbine This article explains the study on turbine.
- Supercavitating propeller This article explains the operates in the conventional submerged mode.
- Switch This article discusses the device for changing the course (or flow) of a circuit.
- Switch - special types This article describes the special types of switch.
- Switched reluctance motors This article explains the swirched relutance motors.
- Torque This article explains the moment or couple, originated with the work of Archimedes on levers.
- Torque converter This article describes the transmit power from one or more engines or motors.
- Valve and port timing diagrams This article explains the Valve and port timing diagrams.
- Vane pump This article explains the consists of vanes in a rotor rotating inside of a cavity.
- Venturi meter and orifice meter This article discusses both the meter and its principles.
- Viscosity This article discusses the measure of the resistance of a fluid to deformation.
- Wankel engine This article explains the type of internal combustion engine.
- Wankel engine - uses This article discusses the uses of the wankel engine.
- Wankel engine advantages and disadvantages This article describes the wankel engine advantages and disadvantages.
- Applications Of Thermoelectrics This article discusses the applications of thermoelectrics.
- Atlas Experiment : How The Data Flows This article discusses the how the data flows in Atlas experiment.
- Atlas Experiment: Physics Highlight Examples This article explains the highlight examples in physics.
- Brillouin Spectroscopy This article describes the predicted the inelastic scattering of light.
- Comparative Cutting: Water Jets, Lasers, And Plasma This article explains the Water jets, Lasers and plasma in detail.
- Computational Astrophysics This article discusses the computational astrophysics.
- Cosmic X-Ray Sources This article discusses the cosmic x-ray sources in detail.
- Cosmic X-Ray Sources - II This article explains the X-ray back ground and emission from clusters of galaxies.
- Crystalline Defects This article describes the contain a certain number of lattice defects.
- Flux Transport Dynamos This article discusses the flux transport dynamos.
- From Micro-Structure To Macro-Properties This article discusses the microscopic definition of a porous medium and macroscopic properties.
- Galactic Magnetic Fields This article describes the origin of Galactic magnetic fields.
- Geothermal Heat Pumps – Advantages And Disadvantages This article discusses the advantages and disadvantages of geothermal heat pumps
- Geothermal Heat Pumps – Configurations/Installation This article explains the configuration and installation of geothermal heat pumps.
- High Pressure Phase Equilibrium Studies This article explains the number of different types of high pressure studies related to phase equilibria.
- Infrared and Raman Spectroscopy This article explains the interaction of radiated energy and matter, environments of atoms in crystals.
- Magnetic Flux Emergence - I This article explains the magnetic flux emergence in detail.
- Magnetic Flux Emergence - II This article explains the emergence related phenomena in detail.
- Magneto Convection This article describes the magnetic convection in detail.
- NMR In Strongly Correlated Materials This article discusses the NMR strongly correlated materials.
- Nuclear Forces This article describes the nuclear forces in detail.
- Nuclear Power Plants And Significance Of Pressurized Water Reactors This article discusses the nuclear power plants and significance of pressurized water reactors.
- Open Porosity Characterization This article discusses the enclosure compared to the atmospheric pressure.
- Organic Superconductivity This article explains the organic super conductivity.
- Organic Superconductivity II This article describes the organic super conductivity in detail.
- Phase Response Curve This article explains the oscillation and measuring the effect on the cycle period.
- Pressurized Water Reactors This article explains the pressurized water reactors in detail.
- Results From Radio Observations In Galactic Magnetic Fields This article discusses the Results from Radio Observations.
- Scroll Wave Turbulence This article explains the scroll wave turbulence.
- Small Scale Cogeneration Including Automotive Applications This article explains History of congestion, Micro CHP and Automotive applications.
- Small Scale Cogeneration Including Automotive Applications - II This article describes the advantages and disadvantages of small scale cogeneration including automotive applications.
- Solar Activity This article explains the large solar activity in detail.
- Solar Activity - II This article describes the small solar activity
- Solar Stirling Engine This article discusses the Solar Stirling Engine in detail.
- Solar Stirling Engine – Introduction And Configuration This article explains the introduction and configuration of solar strling engine
- Solar Telescopes This article discusses the solar telescopes in detail.
- Solar Telescopes - II This article explains the solar telescopes in detail.
- Spectral Instrumentation This article explains the IR experiment includes a light source in spectral apparatus, a detector and a computer.
- Strongly Correlated Electrons In Solids This article describes the Strongly Correlated Electrons In Solids
- Strongly Correlated Electrons In Solids - II This article discusses the Superconductivity and electron-phonon interaction
- Tensors: Stress, Strain And Elasticity This article discusses the properties of crystalline materials are direction dependent because the arrangement of the atoms.
- The ATLAS Experiment This article describes the Atlas experiment.
- The Cuprate Pseudogap This article explains the cuprate pseudogap.
- Theory Of Molecule This article discusses the two or more atoms with certain distances between them through interaction of outer electrons.
- Thermal Characteristic Length Estimation This article describes the thermal characteristic length estimation.
- Thermoelectrics This article explains the thermoelectrics in detail.
- Tully-Fisher Relation This article explains the tully fisher relation in detail.
- Ultrasonic Measurements This article explains the sound wave velocity as a function of depth in the earth.
- Viscous Characteristic Length Estimation This article explains the viscous characteristic length estimation.
- What Does A Raman Spectrum Look Like? This article discusses the spectrum plots light intensity versus light frequency.
- What Is Raman Spectroscopy? This article describes the spectroscopy studies the inelastic scattering of light.
- AC Drives This article describes the collection of mechanical and electro-mechanical components.
- Air, Vibrating and Serial Motors This article explains the types of motors in detail.
- ATEX and Hydraulic Actuators This article explains the ATEX and Hydraulic actuators applications and its uses.
- Cyclo Drives This article describes the mechanism for reducing the speed of an input shaft by a certain ratio.
- DC Drives This article discusses the DC motor speed control systems.
- Diesel Engines This article explains the compression-ignition engine is an internal combustion engine.
- Drives, Compound and Frequency Controlled Drives This article explains the Drives or Engines or motors are machines designed to convert energy.
- Driving Drums and Variators This article discusses the Driving Drums and the Variators in detail.
- Drum Motors This article discusses the motorized pulley is a geared motor drive enclosed within a steel components.
- Engines This article discusses the motor is a machine designed to convert energy into useful mechanical motion.
- Gear Drives and Gear Motors This article describes the gear drives and the gear motors in detail.
- Gearboxes This article discusses the mechanical device utilized to increase the output torque or change the speed of a motor.
- Handles This article describes the object that can be moved or used by hand.
- Harmonic Drives This article describes the strain wave gearing because harmonic drive gears.
- Hydraulic Cylinders This article explains the linear hydraulic motor is a mechanical actuator.
- Lifting Cushions This article describes the one designates two (vulcanized) rubber mats connected at the edges.
- Linear Actuators This article explains the circular motion of a conventional electric motor.
- Pneumatic and Manual Actuators This article describes the Pneumatic and Manual Actuators applications and its uses.
- Pneumatic Cylinders This article discusses the use the power of compressed gas to produce a force in a reciprocating linear motion.
- Quarter Turn, Rotary and Spindle Actuators This article discusses the Quarter turn, Rotary and the Spindle Actuators.
- Servo Drives This article explains the electronic amplifier used to power electric servomechanisms.
- Stepper Motors This article describes the kind of electric motor used in the robotics industry.
- Types of the Actuators This article discusses the actuator typically is a mechanical device and its types.
- 5 Maintenance Tips to Extend Equipment Life and ROI This article discusses the 5 maintenance tips to extend equipment life and ROI.
- 6 Ways to Help Eliminate Unscheduled Downtime This article discusses the 6 ways to help eliminate unscheduled downtime.
- Annealing (Softening) Aluminium Plate This article describes the annealing (softening) aluminium plate.
- Calculating the Point at Which a Piece of Box Section Steel Will Bend and Not Recover This article describes the calculating the point at which a piece of box section steel will bend and not recover.
- California: Motorcycles: Emissions This article explains the program for reducing emissions from highway motorcycles.
- Canada: Motorcycles: Emissions This article describes the motorcycles and contain emission standards for various classes of on-road vehicles.
- Canada: Nonroad: Emissions This article discusses the typically found in construction, mining, farming and forestry machines.
- China: Nonroad: Emissions This article describes the categories of non-highway vehicles and engines.
- Climate Crisis Pits Local Governments against 19th-Century Legal Doctrine This article describes the climate crisis pits local governments against 19th-century legal doctrine.
- Columbia Gorge Air Quality This article describes the holds a load of pollutants, from carbon monoxide to mercury and ammonia.
- Constructing a Safe Pipeline This article discusses the construction and operation to ensure their pipelines are safe.
- Crude Oil Trains Proposed for Grays Harbor This article discusses the crude oil trains proposed for grays harbor.
- Cut Manufacturing Costs by Reducing Emissions This article describes the cut manufacturing costs by reducing emissions.
- EU: Marine: Emissions This article discusses the emissions standards for Inland Waterway Vessels.
- EU: Nonroad: Emissions This article explains the US emission standards for small utility engines.
- Foreign Interests, Local Uranium This article describes the foreign interests, local uranium.
- Germany: Stationary Engines: Emissions This article explains the emissions, ambient exposures and their control methods.
- Historical Climate Trends in WA and Future Change This article describes the historical climate trends in WA and future change.
- How is your Air Quality? This article discusses the coal burning power plants in the Midwest negatively impacts our air.
- How safe are Pipelines? This article describes the exploding natural-gas pipeline to a simple equation.
- Hundreds of Communities are Building Legal Blockades to Fight Big Carbon This article discusses the hundreds of communities are building legal blockades to fight big carbon.
- Hydrocarbon Ban is First of Its Kind This article describes the hydrocarbon ban is first of its kind.
- Increasing Quality Standards This article discusses the increasing quality standards.
- International: Aviation: Efficiency This article explains the limitation and reduction of greenhouse gas (GHG) emissions from aircraft.
- International: Marine: Emissions This article explains the International Convention on the Prevention of Pollution from Ships.
- International: Marine: GHG This article describes the limitation and reduction of greenhouse gas (GHG) emissions from international shipping.
- Is Bigger Better? How to Get More ROI on Manufacturing Machinery This article discusses the how to get more ROI on manufacturing machinery.
- Japan: Nonroad: Emissions This article describes the emission regulations were replaced by three groups of emission standards.
- Lafayette Community Rights Act to Prohibit New Oil and Gas Extraction This article explains the lafayette community rights act to prohibit new oil and gas extraction.
- Liquefied Natural Gas Exports - Part 1 This article explains the liquefied natural gas exports - part 1.
- Liquefied Natural Gas Exports - Part 2 This article discusses the liquefied natural gas exports - part 2.
- Liquified Natural Gas on the Columbia River Reignites Fossil Fuel Battle This article explains the liquified natural gas on the columbia river reignites fossil fuel battle.
- Location Important in Pipeline Planning, Operation This article explains the location important in pipeline planning, operation.
- Managing Water in Manufacturing: A Challenge that’s Not Going to Evaporate This article describes the managing water in manufacturing: a challenge that’s not going to evaporate.
- Modern Mining is Transitioning to Support Manufacturing’s Need for New Materials This article discusses the modern mining is transitioning to support manufacturing’s need for new materials.
- Notable Pipeline Failures This article discusses the Gas Transmission failed to detect cracking beneath a protective coating.
- Oil Sands Pipelines, Here? This article discusses the considering the pace and scale of the fossil fuel developments.
- Rivers and Natural Ecosystems This article describes the rivers and natural ecosystems.
- The Community Right to Sustainable Energy This article discusses the community right to sustainable energy.
- Three Ways to Improve Quality with Lean Manufacturing This article describes the three ways to improve quality with lean manufacturing.
- Three Ways to Improve Warehouse Efficiency This article explains the three ways to improve warehouse efficiency.
- US: Fuels: Biodiesel Specifications This article discusses the US fuels: biodiesel specifications.
- US: Fuels: Compliance This article explains the fuel compliance program that combines fuel registration.
- US: Fuels: Diesel and Gasoline This article describes the diesel fuels for a variety of applications as well as gasoline.
- US: Fuels: Renewable Fuel Standard This article discusses the included small targets of blending ethanol in gasoline.
- US: Marine: Emissions This article discusses the applicable to different engine categories.
- US: Motorcycles: Emissions This article discusses the achieve equivalent emissions reductions from vehicles.
- US: Nonroad: Emissions This article discusses the nonroad engines are all internal combustion engines except motor vehicle.
- US: Stationary Diesel Engines This article explains the sources to control emissions to the level achievable by best demonstrated technology.
- US: Stationary Engines This article describes the testing for emissions of hazardous air pollutants.
- Using Pulleys with Electric Motors This article discusses the using pulleys with electric motors.
- What is the Local Food System Ordinance of Lane County? This article explains the local food system ordinance of lane county.
- Why are Fracking Hopefuls Suing a County in New Mexico? This article explains the extraction of oil, gas and other hydrocarbons.
- Why Coal? This article explains the coal is a black rock that holds lots of energy.
Technology Training that Works