IDC Technologies have been delivering workshops and on-site training since 1996.  These workshops and training session can be presented on demand to accommodate your organisation’s schedule.  Please contact our International Engineering Education Manager at This email address is being protected from spambots. You need JavaScript enabled to view it. for further details.

 

3D Engineering Design and Printing for Rapid Prototyping
3D Engineering Printing
Advanced TCP/IP-based Industrial Networking
Advanced TCP/IP-based Industrial Networking for Engineers and Technicians
Arc Flash Protection for Electrical Safety Professionals
Best Practice Design, Maintenance and Troubleshooting of Conveyors and Chutes
Best Practice in Industrial Data Communications
Best Practice in Sewage and Effluent Treatment Technologies
Boiler Plant Operation and Management for Engineers and Technicians
Business Skills for Engineering Professionals
Circuit Breakers and Switchgear
Critical Power Supply Options and Planning of High Availability Supplies
Cybersecurity for Automation, Control & SCADA
Cybersecurity for Automation, Control and SCADA Systems
Data Communications, Networking and TCP/IP Troubleshooting
Deisel Power Generation Plants with Multiple Machines in Parrallel and on the Electrical Power Grid
Design of Industrial Automation... SCADA systems
Designing, Specifying and Constructing with Modern Concrete
Digital Signal Processing for Engineers and Technicians
Earthing of Utility and Industrial Distribution Systems
Earthing, Bonding, Lightning & Surge Protection
Electrical & Instrumentation Eng. for Oil & Gas Facilities
Electrical and Instrumentation (E&I) Engineering for Oil and Gas Facilities
Electrical Equipment for Practical Hazardous Areas for Engineers & Technicians
Electrical Maintenance for Engineers and Technicians
Electrical Maintenance for Instrumentation and Electrical Personnel
Electrical Power System for Non-Electrical Engineers
Electrical Power System Fundamentals
Electrical Power System Fundamentals for Non-Electrical Engineers
Electrical Substation and Switchyard Design
Electrical Switchboards, CBs, Relays, Cables and PLCs
Electrical Wiring Standards - AS/NZS 3000:2007
Electrical Wiring Standards - National Rules for Electrical Installations
Emergency Power Supplies: Electrical Distribution Design, Installation and Commisssioning
Energy Efficiency, Design, Engineering and Auditing
Engineering Leadership
Engineering Leadership - Making the Transition from Engineer to Leader
Engineering Leadership:Transition from Engineer to Leader 
Fieldbus, DeviceNet and Ethernet for Industry
Financial Fundamentals & Project Investment
Functional Safety (IEC61508/61511) for Process Industries
Fundamentals for Oil & Gas
Fundamentals of Engineering Maths, Physics and Chemistry
Fundamentals of Industrial Automation
Fundamentals of Instrumentation, Process Control, PLCs & SCADA
Fundamentals of Instrumentation, Process Control, PLCs & SCADA for Plant Operators & Other Non-Instrument Personnel
Fundamentals of Mechanical Engineering
Fundamentals of Operation and Troubleshooting of Emergency/Standby Power Generation using Diesel Generators
Fundamentals of Power Distribution & Power Systems: Hands-on Practical Analysis and Design
Fundamentals of Practical Building Automation Systems
Fundamentals of Process Plant Layout & Piping Design
Gas Turbines: Fundamentals, Maintenance, Inspection & Troubleshooting
Handling Chemicals and Chemical Processes
Handling Chemicals and Chemical Processes - Tips, Tricks and Tools
Hands-On Data Communications, Networking and TCP/IP Troubleshooting
Hazardous Areas for Engineers & Technicians
Hazardous Waste Management and Pollution Prevention
Heating, Ventilation & Airconditioning for Engineers & Technicians
High Voltage Design & Installations Master Class
High Voltage Electrical Compliance and Safety Operating Procedures
High Voltage Safety Operating Procedures for Engineers and Technicians
IEC61850 for Substation Automation
Inspection, Testing... Protective Relays, Cables and PLCs
Industrial I&C for Non-Instrument Personnel BOOTCAMP
Industrial Network Security for SCADA, Automation, PC and PLC
Industrial Programming using 61131-3 for PLCs
Industrial Safety, Risk Assessment & Shutdown Systems for Industry
Inspection, Testing and Commissioning of Electrical Components
Inspection, Testing and Commissioning of Electrical Switchboards, Circuit Breakers, Protective Relays, Cables and PLCs
Installation, Calibration and Maintenance of Electronic Instruments
Installing, Programming and Commissioning of Power System Protection Relays and Hardware
Instrumentation Engineering for Oil & Gas Facilities
Instrumentation, Process Control, PLCs & SCADA
Integrated Programming, Maintenance, Troubleshooting and Optimisation of the Drill Monitor System (DMS)
Introduction to the Selection, Installation, Commissioning and Maintenance of Fiscal Flow and Metering Equipment
Leading Your Engineering Team to Top Performance
Lightning, Surge Protection & More of Electrical & Electronic Systems
Maintenance and Troubleshooting of UPS Systems and Battery Power Supplies
Master Series - Instrumentation & Control
Measurement and Control for Non-Instrument Personnel
Mechanical, Electrical and Instrumentation Engineering
Motor Protection, Control & Maintenance Technologies
Operation and Maintenance of Diesel Power Generating Plants
Operation and Troubleshooting of Emergency Power Generation using Deisel Generators
People Management Skills for Technical Professionals
Performance Monitoring of Pumps and Compressors
Pipe Stress Analysis with Introduction to CAESAR II
Pipeline Systems - Design, Construction, Maintenance & Asset Management
PLCs and SCADA Systems - afternoon course (Australia)
Power Cables: Operation, Maintenance, Location and Fault Detection
Power Electronics and Switch Mode Power Supply
Power System Protection for Engineers and Technicians
Power Transformers: Operation, Maintenance & Testing
Practical Advanced Process Control for Engineers and Technicians
Practical Alarm Management for Engineers and Technicians
Practical Analytical Instrumentation in On-Line Applications
Practical Android App Development
Practical Arc Flash Protection
Practical Arc Flash Protection for Electrical Safety Professionals
Practical Balancing, Alignment and Condition Monitoring of Rotating Equipment
Practical Boiler Control and Instrumentation
Practical Boiler Plant Operation and Management
Practical Cleanroom Technology and Facilities for Engineers and Technicians
Practical Control Valve Sizing, Selection and Maintenance
Practical Conveyor, Chute and Feeder Design
Practical Data Communications & Networking
Practical Digital Signal Processing for Engineers and Technicians
Practical DNP3, 60870.5 & Modern SCADA Communication Systems
Practical Earthing (Grounding) ... Surge Protection
Practical Earthing, Bonding, Lightning & Surge Protection
Practical Earthing, Shielding,  Electrical & Electronic Noise and Surge Reduction
Practical Electrical Network Automation & Communication Systems
Practical Electrical Safety Techniques
Practical Electrical Substation Safety
Practical Electrical Wiring Standards - AS/NZS 3000:2007
Practical Embedded Controllers: Troubleshooting and Design
Practical EMC and EMI Control for Engineers and Technicians
Practical Energy Efficiency, Design... Auditing
Practical Fibre Optics and Interfacing Techniques to Industrial Ethernet and Wireless
Practical Fibre Optics for Engineers and Technicians
Practical Fieldbus, DeviceNet and Ethernet for Industry
Practical Financial Fundamentals & Project Investment Decision Making
Practical Fundamentals of Chemical Engineering
Practical Fundamentals of Heating, Ventilation & air Conditioning (HVAC)
Practical Fundamentals of OPC
Practical Hazardous Areas
Practical Hazardous Areas for Engineers and Technicians
Practical Hazardous Locations for Engineers and Technicians
Practical HAZOPS for Engineers & Technicians
Practical High Voltage Safety Operating Procedures for Engineers and Technicians
Practical HV and LV Switching Operations
Practical HV and LV Switching Operations and Safety Rules
Practical HV Cable Jointing & Terminations for Engineers and Technicians
Practical Hydraulic and Pneumatic Systems
Practical Hydraulic Systems
Practical Hydraulic Systems: Operation and Troubleshooting
Practical IEC 61850 for Substation Automation
Practical Industrial Electronics for Engineers and Technicians
Practical Industrial Flow Measurement for Engineers and Technicians
Practical Industrial Networking for Engineers & Technicians
Practical Industrial Troubleshooting of Instrumentation, Electrical and Process Control
Practical Industrial Wireless for Engineers and Technicians
Practical Instrumentation for Automation and Process Control
Practical Intrinsic Safety
Practical Intrinsic Safety for Engineers and Technicians
Practical Lubrication Engineering
Practical Machine Vision Applications in Industry
Practical Machinery and Automation Safety for Industry
Practical Machinery Vibration Analysis and Predictive Maintenance
Practical Maintenance & Troubleshooting of Battery Power Supplies
Practical Marketing for Technical Professionals
Practical Mechanical Sealing with Rotary, Pneumatic and Hydraulic Seal Types plus Gaskets
Practical Medium & High Voltage Testing
Practical Motor Protection, Control and Maintenance Technologies
Practical PLCs for Automation and Process Control
Practical Power Cabling and Earthing
Practical Power Distribution
Practical Power System Harmonics, Earthing and Power Quality
Practical Power System Protection for Engineers and Technicians
Practical Power Transformers – Operation and Maintenance
Practical Power Transformers: Operation, Maintenance & Testing
Practical Process Compressors
Practical Process Control
Practical Process Control & Tuning of Industrial Control Loops
Practical Programmable Logic Controllers (PLCs) for Automation & Process Control
Practical Project Management
Practical Project Management for Engineers and Technicians
Practical Pumps - Design, Operation and Maintenance for Centrifugal and Positive Displacement Pumps
Practical Pumps and Compressors: Control, Operation, Maintenance & Troubleshooting
Practical Radio Telemetry Systems for Industry
Practical Safe Lifting Practice and Maintenance
Practical Safety Instrumentation and Emergency Shutdown Systems for Process Industries
Practical SCADA & Telemetry Systems for Industry
Practical SCADA Systems for Industry
Practical Shielding, EMC/EMI, Noise Reduction, Earthing and Circuit Board Layout
Practical Shutdown & Turnaround Management for Engineers and Managers
Practical Specification and Technical Writing for Engineers and Technical People
Practical TCP/IP and Ethernet Networking for Industry
Practical TCP/IP Troubleshooting & Problem Solving for Industry
Practical Troubleshooting & Problem Solving of Ethernet Networks
Practical Troubleshooting & Problem Solving of Industrial Data Communications
Practical Troubleshooting & Problem Solving of Modbus Protocols
Practical Troubleshooting and Problem Solving of Ethernet TCP/IP and Modbus Protocols
Practical Troubleshooting of Electronic Circuits for Engineers and Technicians
Practical Troubleshooting, Design & Selection of Industrial Fibre Optic Systems for Industry
Practical Troubleshooting... of Modbus Protocols
Practical Tuning of Industrial Control Loops
Practical Use and Understanding of Foundation FieldBus for Engineers and Technicians
Practical Variable Speed Drives for Instrumentation and Control Systems
Practical Wireless, Ethernet and TCP/IP Networking
Process Plant Layout & Piping Design-4 hr online course
Process, Electrical & Instrumentation Drawings and Documentation
Programmable Logic Controllers..
Project Management for Engineers & Technicians
Reliability Centered Maintenance
Remote Engineering, Mechatronics and Robotics
Root Cause Failure Analysis
Routers & Switches (TCP/IP & Ethernet)
Safe Operation & Maintenance of Circuit Breakers & Switchgear
Safety Instrumentation & Emergency Shutdown Systems
Safety Relief Valves: Inspection, Operation and Troubleshooting
Setting Up,Understanding&Troubleshooting Industrial Ethernet.
South African Standard SANS 10142 - The Wiring of Premises
Specification and Technical Writing
Specification and Technical Writing for Engineers and Technical People -
Structural Design for Non-Structural Engineers
The Practical Business Engineer
Train the Trainer - Presentation and Instructing Skills
Transportation Planning and Management
Troubleshooting & Problem Solving of Ethernet Networks
Troubleshooting & Problem Solving of Industrial Data Comms
Troubleshooting and Problem Solving of PLCs and SCADA Systems
Troubleshooting Industrial Ethernet & TCP/IP Networks
Troubleshooting of Electronic Circuits
Troubleshooting & Problem Solving of Industrial Data Comm
Troubleshooting, Designing and Installing Digital & Analog closed Circuit TV Systems
Troubleshooting, Maintenance & Protection of AC Electrical Motors and Drives
Troubleshooting, Maintenance & Protection of AC Motors & Drives
Tuning of Industrial Control Loops
Understanding Electrical Engineering and Safety for Non-Electricians
Wind & Solar Power - Renewable Energy Technologies

Latest EIT News

07 November 2024